Post by anoori on setting up Raspberry pi as an opc ua Server with UaExpert as Client ^{CODESYS Forge talk (Post)}
I am trying to set up my Raspberry Pi as an OPC UA server and use UaExpert on my Pc as the OPC UA client.However, Im encountering some certificate-related errors in UaExpert: 1.Unable to get local issuer certificate. 2. Unable to get certificate CRL. 3. Unable to verify the first certificate.
Last updated: 2024-09-11

Post by hua-huang on Compile problem - can't get .bin or .h86 file ^{CODESYS Forge talk (Post)}
Hello, I am programming for IFM controller CR7132, after I check 'create binary file of the application' and 'rebuild all', there is no error when compiling but no .bin or .h86 file generated. Could someone please inform the correct way? Thanks in advance! BR, Hua
Last updated: 2024-09-12

Post by garmusd on Raspberry Pi 5 GPIO not working. ^{CODESYS Forge talk (Post)}
Hi, Codesyscontrol 4.13.0.0 Raspberry Pi5 64bit with latest updates. Cant get working GPIO - no output and no input. SPI/I2C not tested. GPIOs B+/Pi2, Input/Output is set in the parameters, assigned variables int the Mapping. Absolutely no reaction. Do I need to configure anything else to make it work? Thanks!
Last updated: 2024-09-26

Post by timvh on FB string and naming ^{CODESYS Forge talk (Post)}
Really not clear what you are trying to do, but isn't a Struct enough? So add an object of the type DUT to the Application. Then create a structure TYPE ST_Sensor : STRUCT sName : STRING; uiNumber : UINT; END_STRUCT END_TYPE Then in you application add an instance of this Structure stSensor1 : ST_Sensor := (sName := 'my sensor', uiNumber := 1); or use it like this stSensor1.sName := 'my sensor';
Last updated: 2024-09-28

Post by jarnok on How to know if output if function block is used ^{CODESYS Forge talk (Post)}
Hi, Is it possible to know of an output of a function block is used? I've found there is a way to find unused inputs of a fb, through the attribute: is_connected. But I'm wondering if the same can be done for an output. Thanks in advance!
Last updated: 2024-10-15

Post by phoward131 on Alarm Table Filtering ^{CODESYS Forge talk (Post)}
I actually just found the solution maybe. If anyone else is running into this, go to your Project Settings > Visualization > Advanced (check 'Visible' to see advanced settings) > UNCHECK 'Activate property handling in all element properties.' I am not sure what else unchecking this might affect but it seems to allow the alarm table to be filtered as expected.
Last updated: 2024-10-28

Post by phoward131 on Alarm filtering latch variables ^{CODESYS Forge talk (Post)}
I actually just found the solution maybe. If anyone else is running into this, go to your Project Settings > Visualization > Advanced (check 'Visible' to see advanced settings) > UNCHECK 'Activate property handling in all element properties.' I am not sure what else unchecking this might affect but it seems to allow the alarm table to be filtered as expected.
Last updated: 2024-10-28

Post by pascaljt on Warning code C0373 ^{CODESYS Forge talk (Post)}
Hello, I wrote a function block for a controller but I have a warning code C0373 "expression or part of it has no effect" and the sub routine which contain my function block is underlined in blue. Despite, the FB works perfectly. Do you know why I have this warning ? Thanks. Pascal.
Last updated: 2024-10-30

Post by reinier-geers on Energie price ^{CODESYS Forge talk (Post)}
On a website i can get the energie price. But how does that work in codesys? There is a video of Rest client. But i can find the HTTP library. If i type on my browser : https://enever.nl/api/stroomprijs_vandaag.php?token=ANWB i get {"status":"true","data":"Please provide a valid API token. More information at https:\/\/enever.nl\/prijzenfeeds\/","code":"2"}
Last updated: 2024-12-03

Post by reinier-geers on Energie price ^{CODESYS Forge talk (Post)}
On a website i can get the energie price. But how does that work in codesys? There is a video of Rest client. But i can find the HTTP library. If i type on my browser : https://enever.nl/api/stroomprijs_vandaag.php?token=ANWB i get {"status":"true","data":"Please provide a valid API token. More information at https:\/\/enever.nl\/prijzenfeeds\/","code":"2"}
Last updated: 2024-12-03

Post by testyhalftime on Version management ^{CODESYS Forge talk (Post)}
Hi Suyash! To avoid library mismatch errors in CODESYS, always use the same IDE version your project was created with. Use the Library Manager to check and update libraries. For consistent results, keep a record of project and library versions, and avoid auto-updates unless necessary. https://forge.codesys.com/forge/talk/Engineering/thread/ea1bdacd28/Geometry Dash
Last updated: 2025-05-28

Post by programmer on 3.5 P20 hangs - no response ^{CODESYS Forge talk (Post)}
hi imdatatas, thanks for your suggestion! I added the process execution to be sure. In the meantime I reïnstall Windows but it dind't help directly. Finally I deleted CodeMeter Runtime Server after Codesys installation. Because this Service was not able to start. And it works (for now) :)!
Last updated: 2025-06-25

Post by eschwellinger on Codesys Virtual control SL ^{CODESYS Forge talk (Post)}
Hi, which CODESYS Version are you using exactly? Either update to 3.5.21.x if you are on 3.5.20.x if not - add a more secure pw. Seems that on adding the login credentials it is mandatory in 4.16.0.0 -to have complianct to password policy seems a bug that the message not occure.
Last updated: 2025-08-06

Post by timvh on CoDeSys v3.5: creating libraries for both 32-bit and 64-bit controllers ^{CODESYS Forge talk (Post)}
Yes, you are right. I think the help is pretty clear: https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_library_development.html It helps you to find errors in the source code of your library if you want to create a library which is using pointers and you want to use your library on 32 and/or 64 bit platforms.
Last updated: 2025-09-02

Post by gseidel on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
Hi liai, I tried it with a fresh CODESYS SP21 Patch 2 installation and SoftMotion 4.18, but cannot reproduce the compile errors. Could you please upload a project archive that has the errors? Then I can have a deeper look. https://dl.codesys.com/s/q4KcbKCcZndg6oR Best regards, Georg
Last updated: 2025-09-24

Post by felixal on Codesys automatic Data transfer to USB on rasberry pi ^{CODESYS Forge talk (Post)}
Hi all, I am currently working on a project where I need to save data automatically on many diffrent USB-Sticks, which are always plugged in the same USB-Port on a Rasberry PI, but I do not get how I can automatically detect the USB devices Folder Name and save a file there on Linux. Thanks!
Last updated: 2024-01-03

Post by peter-skokanek on Rpi install runtime licence on SP13 ^{CODESYS Forge talk (Post)}
Hi, I have an older project which has been running for years. Unfortunately I have to replace current Raspberry. I repplaced it by new rpi 3 with newest 32 bit Raspberry OS. I oredered a new runtime licence. When I try to activate it, the connection to target is interrupted immediatelly after press next button in the last step of instalation.
Last updated: 2024-01-08

Post by lgeertsema on Checkbox font color in visualization style ^{CODESYS Forge talk (Post)}
Hello, I'm having a similar issue with buttons. I want to be able to set the default color and transparency of a button. I've tried a lot of different iterations like KNewman, but to no avail. Has there been some documentation released since KNewman posted this, or is the style editor still as undocumented as ever?
Last updated: 2024-01-11

Post by rmaas on Direct Pointers in IOMapping for EtherCAT with IoDrvEthercatLib.ETCSlave_Dia ^{CODESYS Forge talk (Post)}
Hi, Im not sure if this is what you mean, but i do succesfully use the IoDrvEthercatLib.ETCSlave.InputData and IoDrvEthercatLib.ETCSlave.OutputData to read from and write to beckhoff DI and DO cards. Very convenient as you can make an FB with an VAR_IN_OUT of type IoDrvEthercatLib.ETCSlave and only have to pass the slave reference... So i am not using .ETCSlave_Diag but .ETCSlave...
Last updated: 2024-02-13

Post by timvh on Limiting Memory Access of an Array to Within its Bounds ^{CODESYS Forge talk (Post)}
Add the object "POU for Implicit Checks" to your application, then select "Bounds check". This will create a function which is automatically called each time an array is write accessed. In the function you can handle "out of bounds" situations. By default it will be limited to its lower or upper bound.
Last updated: 2024-03-06

Post by manuknecht on High Cycle Times for SoftMotion_PlanningTask when using AxisGroup ^{CODESYS Forge talk (Post)}
Hi These issues occured using a Raspberry Pi 4. I also repeated the experiment with codesys control for Windows, which results in much lower cycle times. With up to 3 ms, I still think they are fairly high given they should run at 2 ms and don't require complicated kinematics. The effect of higher cycle times for slower movements also prevails.
Last updated: 2024-03-13

Post by koehler on Codesys 3.5.12 Module not Found ^{CODESYS Forge talk (Post)}
Hi there, I am getting troubles with a project. In the Hardware configuration I got some Lenze drives 9400. One of them got as status " Module not Found". Connection are good. ID Node of the Canopen network is also good. I don't find any reason for this status, nor any options to check.
Last updated: 2024-04-17

Post by yannickasselin on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
A bit of work but maybe possible to make your own driver using "CODESYS Control SL Extension Package". Look at the "ExternalIoDrv" example. It is installed in "C:\Program Files\CODESYS 3.5.20.0\CODESYS\CODESYS Control SL Extension Package" when you install the "CODESYS Control for Linux SL".
Last updated: 2024-05-08

Post by eschwellinger on Recipe Manager - Not Creating Recipe Files ^{CODESYS Forge talk (Post)}
With Linux SL and Windows Control Win - with this example https://forge.codesys.com/prj/codesys-example/recipe-manageme/home/Home/ We see in the PLClogic directory the generated recipe files see my screenshot. c:\ProgramData\CODESYS\CODESYSControlWinV3x64\XXXXXXXX\PlcLogic\Hello.RecipeDef.txtrecipe c:\ProgramData\CODESYS\CODESYSControlWinV3x64XXXXXXX\PlcLogic\ABC123.OtherRecipes.txtrecipe
Last updated: 2024-05-21

Post by s1mon on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
If I add "PlaceholderFilePath.2=/sys/devices/w1_bus_master2, $OneWire2$" to the CODESYScontrol.cfg I can use a 2nd OneWireMaster in the Codesys Runtime. But then my EtherCAT_Master is not working any more. Any Idea? Is there any instruction or documentation how a 2nd OneWire Bus Master can be used within Codesys Runtime on a raspberry pi 5?
Last updated: 2025-10-18

Sort by relevance or date