Need Help Configuring Energy Analyzers via Modbus TCP & RTU (RS-485) in CODESYS 3.5 ^{CODESYS Forge talk (Thread)}
Need Help Configuring Energy Analyzers via Modbus TCP & RTU (RS-485) in CODESYS 3.5
Last updated: 2025-03-13

Post by mehakfatima on Need Help Configuring Energy Analyzers via Modbus TCP & RTU (RS-485) in CODESYS 3.5 ^{CODESYS Forge talk (Post)}
Hello everyone, I am currently working on reading data from energy analyzers using Modbus TCP and RTU (RS-485). In my previous software, I used the following method to add slave devices (i have attached the image) and configure registers: Add the Modbus slave device. Configure the communication parameters (baud rate, parity, etc.). Define the registers and their addresses for data retrieval. Now, I am trying to achieve the same in CODESYS 3.5, but I am not sure how to configure the Modbus master, add slave devices, and set up the registers properly. If anyone has experience with Modbus TCP/RTU setup in CODESYS 3.5, I would really appreciate your guidance! A step-by-step explanation or any references/tutorials would be extremely helpful.
Last updated: 2025-03-13

Post by milosfejgl on Codesys Licenses - How to reload them after updating the Raspberry Pi OS ^{CODESYS Forge talk (Post)}
We use several control units running on Raspberry Pi, programmed using Codesys software, with multiple licenses stored as soft containers. We are planning to update the SD card image of the Raspberry Pi to a newer OS version. However, we are concerned that this process might result in the loss of our soft container licenses. Is there a way to temporarily deactivate the license so that it can be reactivated on the updated system? Alternatively, what would be the best method to preserve the licenses during the update? Thank you in advance for any responses!
Last updated: 2025-03-13

Post by twofacexx on Package Sound Demo funktioniert nicht ^{CODESYS Forge talk (Post)}
Moin, ich grab mal den alten Thread hier aus, habe das gleiche Vorhaben, Sounds auf dem Raspberry abzuspielen. Habe einen Pi5 mit Codesys Pi 64 SL und benutze auch die SysProcessExecuteCommand sowie die SysProcessExecuteCommand2. Habe das auch schon erfolgreich umgesetzt um Kamerabilder aufzunehmen und Bilder zu kopieren, aber die Sounds funktionieren leider nicht. Wenn ich direkt in der Konsole die Befehle eingebe, werden die Sounds abgespielt, werden diese aber durch Codesys getriggert, wird kein Sound abgespielt. Ich habe bis jetzt - espeak - espeak-vg - aplay - omxplayer versucht. Alle in die CodesysControl_User.cfg eingetragen etc und keine Fehlermeldung beim ausführen. Habe BT Headset und USB Headset getestet, wie gesagt, direkt in der Konsole gehts, durch Codesys nicht. Hat irgend jemand eine Idee woran es liegen könnte?
Last updated: 2025-03-13

How to use libdoc to implement libraries in multiple languages ^{CODESYS Forge talk (Thread)}
How to use libdoc to implement libraries in multiple languages
Last updated: 2025-03-13

Post by xlfll on How to use libdoc to implement libraries in multiple languages ^{CODESYS Forge talk (Post)}
po file to generate translation file mo, how to mo file into lmd file into the compilation library? This is not clearly described in the codesys help. Does anyone know? codesys help:https://content.helpme-codesys.com/en/LibDevSummary/localization.html#deployment-of-translated-documents
Last updated: 2025-03-13

Post by pistola on Making a Visu Element normally invisible and visible if variable is true ^{CODESYS Forge talk (Post)}
You can use Not(Variable) in that Invisible spot. Example if you want it to be invisible when the bool is false then: Not(True) = False Not(False) = True
Last updated: 2025-03-14

Post by struccc on The future and proper use of CAA.BOLT, CAA.SEMA,.. ^{CODESYS Forge talk (Post)}
Dear All, Dear CODESYS, I'm curiously following CODESYS transitioning away from the CAA libraries, and I'm mostly in favor of these major changes. Naturally, I'd like to align my current (not end-user) developments accordingly. I'm tracking , reading release notes, ... And want to figure out the future :) Is it possible to hear / read more about the reasons, objectives and scope of these changes? One important element is CAA Types - CAA Types Extern. What is the plan with that? What's the future of CAA.SEMA, CAA.BOLT ? I have never used them (always relied on SysLib*), but they are tempting... Would be useful to have a platform independent "Macro" for this functionality... Is there something in existing or planned ? Are they suitable to be used in low level libraries... For Example IO-Drivers, Components, "to-become system libraries"? CAA.TaskLock, CAA.TaskUnlock ? Well, they don't claim platform independency, so I can't rely on those.... Any up-to-date advise, standard, pattern to follow in new libraries for task and resource locking? Practical set of conditional defines to be used? If this information is not publicly available, can you please send a private message about the proper way to achieve this? I have support agreement, just couldn't get trough with these questions... P.
Last updated: 2025-03-14

Post by hismoon on Inheritence of struct, ^{CODESYS Forge talk (Post)}
Using a UNION instead of a STRUCT alone should give you that flexibility and only occupy memory once. And if you want to be really elegant, you could use an FB, which only holds PUBLIC VAR. Because a POU can use "EXTENDS"/inheritance. In CODESYS V3, an FB has a lot in common with C++ classes. Using ANY or ALIAS is rarely a good idea. It neither won't be pretty, nor have good readability and requires you to create a lot of error-prone things around it.
Last updated: 2025-03-14

Post by hismoon on Inheritence of struct, ^{CODESYS Forge talk (Post)}
--- deleted. Was a bug.
Last updated: 2025-03-14

Post by hismoon on Inheritence of struct, ^{CODESYS Forge talk (Post)}
--- deleted. Was a bug.
Last updated: 2025-03-14

Post by hismoon on Inheritence of struct, ^{CODESYS Forge talk (Post)}
--- deleted. Was a bug.
Last updated: 2025-03-14

Post by hismoon on Inheritence of struct, ^{CODESYS Forge talk (Post)}
--- deleted. Was a bug.
Last updated: 2025-03-14

Post by hismoon on Inheritence of struct, ^{CODESYS Forge talk (Post)}
--- deleted. Was a bug.
Last updated: 2025-03-14

Inheritence of struct, ^{CODESYS Forge talk (Thread)}
Inheritence of struct,
Last updated: 2025-03-14

Post by egau on Enable and Disable Project IO programmatically ^{CODESYS Forge talk (Post)}
Hi @eschwellinger, I tried this with Modbus COM slaves. I was able to disable them (slave becomes greyed out in the device tree), but the DED.Reconfigure "eError" output shows "NOT_SUPPORTED". After this, when I tried to re-enable the slave, it did not work (device stayed greyed out in the device tree), and the DED.Reconfigure "eError" output also showed "NOT_SUPPORTED". Is there something to do about this, or the device just doesn't support reconfiguration? P.S: I tried this running locally on my computer (not in simulation mode). So of course I was not physically connected to the devices. I have two similar projects, but one of them doesn't have the Modbus_COM devices. I know I can "Exclude from build" the devices for that project, but I would really prefer not to do this if possible. I would prefer to dynamically toggle a configuration variable that would enable or disable the slaves.
Last updated: 2025-03-14

Enable and Disable Project IO programmatically ^{CODESYS Forge talk (Thread)}
Enable and Disable Project IO programmatically
Last updated: 2025-03-14

Post by fmon on Modbus : dis- / re-connect cable: modbus does not re-start ^{CODESYS Forge talk (Post)}
Hello, I am using codesys Modbus TCP client (4.4.0.0) to communicate with a python modbus server (package pyModbusTCP). I first start my python server on the distant machine. After a fresh codesys compilation, a plc connection/transfer and a PLC run, the modbus connection is OK. Every time in this context the connection is created correctly. When I shut down the server, the modbus connection falls, that is normal. When I restart the python server, impossible to recreate the modbus connexion. With the client autoreconnection, I see on my server that the client tries to connect but unsuccesfully. I have the following message : DEBUG:pyModbusTCP.server:accept new connection from ClientInfo(address='192.168.1.20', port=33476) DEBUG:pyModbusTCP.server:Exception during request handling: NetworkError('recv return null') I tried to stop the codesys client and to restart it with these commands : Modbus_TCP_Client.xStop := True; // Or False Modbus_TCP_Client.Enable := True; // Or False Modbus_TCP_Server.Enable := True; // Or False I tried to confirm the error manually to force reconnection with: Modbus_TCP_Server_Motors.xConfirmError := TRUE; I tried also this command to STOP/RESET/START client and server (codesys side) but nothing happens : status_client := Modbus_TCP_Client.SetCommunicationState(eRequestedState := DED.DEVICE_TRANSITION_STATE.STOP); // .RESET & .START The answer of this function when executed is "status_client = NOT_SUPPORTED" It seems that is a socket problem, but I do not understand if it is on the client or server side. I tried a modbus simulator called "ananas.exe" and the result is the same. Impossible to get a modbus reconnection. What is different at the first connection and at a reconnection attempt ? Thanks for your help
Last updated: 2025-03-14

ExportPLCopenXML is failing ^{CODESYS Forge talk (Thread)}
ExportPLCopenXML is failing
Last updated: 2025-03-15

Post by alberto on ExportPLCopenXML is failing ^{CODESYS Forge talk (Post)}
I'm trying to export my whole project through the option ExportPLCopenXML. It seems working, but when I'm trying to import the xml I have the following error during the importation process: Object reference not set to an instance of an object. It seems a usual issue with this process that affects to the pointer to user classes inside a procedure. I receive this error for two general functions that have this pointer declarations in the VAR_INPUT section. It seems a bug into the export/import process of CodeSYS and I couldn't skip it so far. Anyone could help me? Thanks in advance.
Last updated: 2025-03-15

Post by libichj on Raspberry Pi: List of available drivers / libraries ^{CODESYS Forge talk (Post)}
Is it possible to renew the urls in your post? Especially fo "Arduino UNO IO Device Description and Library"? Thank you for reply.
Last updated: 2025-03-15

Raspberry Pi: List of available drivers / libraries ^{CODESYS Forge talk (Thread)}
Raspberry Pi: List of available drivers / libraries
Last updated: 2025-03-15

Post by trusty-squire on Codesys for raspberry pi 5 not working exactly ^{CODESYS Forge talk (Post)}
Not sure if you've resolved this yet, but the Codesys runtime user/password is different than the Linux user/password. You'll need the Linux user credentials when you log in over SSH (for example, to install the Codesys runtime). When you first log in to Codesys on the RaspPi you'll set up a Codesys user and password. If you lost those credentials, you could try uninstalling and then re-installing the Codesys runtime on the RaspPi so you can setup a new user/password.
Last updated: 2025-03-16

Codesys for raspberry pi 5 not working exactly ^{CODESYS Forge talk (Thread)}
Codesys for raspberry pi 5 not working exactly
Last updated: 2025-03-16

Post by trusty-squire on Codesys Licenses - How to reload them after updating the Raspberry Pi OS ^{CODESYS Forge talk (Post)}
Last updated: 2025-03-16

Sort by relevance or date