Post by akneer on HMI über Webbrowser ^{CODESYS Forge talk (Post)}
Beispiel: IF bShutdownPC THEN bShutdownPC := FALSE; // LINUX SysProcess_Implementation.SysProcessExecuteCommand( pszComand:='shutdown -h 0', pResult := ADR(udiError)); // WINDOWS SysProcess_Implementation.SysProcessExecuteCommand( pszComand:='shutdown.exe -s -t 05', pResult := ADR(udiError)); END_IF
Last updated: 2026-03-04

Post by alexgooi on Codesys KNX implementation ^{CODESYS Forge talk (Post)}
Dear Forum, For anyone interested we have solved this problem. Before we were using a KNX TP/IP interface, now we are using a KNX TP/IP router, and it works like a charm now.
Last updated: 2026-03-04

Post by oemcba on Editor FIND highlight color ^{CODESYS Forge talk (Post)}
Today is 2026, and we still have the same issue since 2017, anyone have the answer? i'm using V3.5 SP18 P4+ from festo, thanks in advance... @rudolsto @r.evbatyrov @cole @mahmutonx @root @codesys-com
Last updated: 2026-03-06

Post by fpawlak on How to register own component - CMAddComponent() or CMAddComponent2() ^{CODESYS Forge talk (Post)}
Hi, so really oneone has no idea which way is correct one? Or maybe both are okey if they work for me?
Last updated: 2026-03-13

Post by gordonkeller360 on RS232 Communication in CODESYS Control RTE V3 ^{CODESYS Forge talk (Post)}
Hi -- Did you have any luck porting this over to RTE? I have a similar situation, where I am using CAA SerialCom and it works fine with Control Win, but I can't open the port when using in RTE. Any advice helps. Thanks!
Last updated: 2026-03-14

Post by pernockham on Gateway in China - "Gateway not connected" ^{CODESYS Forge talk (Post)}
Finally sorted (unit in China). The problem was related to dns-setting of the gateway/host. Connection (also inside china) tested/works.
Last updated: 2026-03-18

Post by reinier-geers on CODESYS crashes when adding standard OPC UA Information Model to Communication Manager ^{CODESYS Forge talk (Post)}
I only experiance a lot of problems with Version 20 and 21. Version 20 crashes at a online change Version 21 - 5 identical programms in one project. The frist runs. The thirt Crashes. NOt even a screen
Last updated: 2026-03-19

Post by thomasrek31 on Textfield display problem ^{CODESYS Forge talk (Post)}
Hello, have you found a solution? It seems I have the same problem as you. I can't remove the overlay, otherwise certain functions stop working.
Last updated: 2026-03-23

Post by thomasrek31 on Textfield display problem ^{CODESYS Forge talk (Post)}
Hello, have you found a solution? It seems I have the same problem as you. I can't remove the overlay, otherwise certain functions stop working
Last updated: 2026-03-23

Post by ulvis on CAA 3.5.16 TLS configuration - certificate ^{CODESYS Forge talk (Post)}
Hi, did yo have any luck with this? I am facing the same challenge. Using a WinCTRLx64 but I get AccessViolation error in my CmpTlsCreateContext() call.
Last updated: 2026-03-23

Post by struland on Sysfile Konfiguration ^{CODESYS Forge talk (Post)}
Bei mir half: [SysFile] IecFilePath=/mnt/sdcard Allerdings ist es kein Raspi. Den Ordner, der gelesen werden soll mal auf korrekte Zugriffsrechte prüfen. Im Falle das SELinux aktiv ist mit ls -lZ, ansonsten ls -al
Last updated: 2026-04-13

Post by struland on Sysfile Konfiguration ^{CODESYS Forge talk (Post)}
Bei mir half: [SysFile] IecFilePath=/mnt/sdcard Allerdings ist es kein Raspi. Den Ordner, der gelesen werden soll mal auf korrekte Zugriffsrechte prüfen. Im Falle das SELinux aktiv ist mit ls -lZ, ansonsten ls -al
Last updated: 2026-04-13

Post by nulltrace on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Hey, I also waiting for feedback from Mr. Schwellinger @eschwellinger, please send me an answer, i would appreciate it. The clue is, i know the solution, but have to check if it's allowed to share.
Last updated: 2026-04-14

Post by reinier-geers on Resize and position Numpad/Keypad ^{CODESYS Forge talk (Post)}
HI, I download the scale dialog. But cant find were i can Set the size of the dialogs. only the position. I want the diolog bigger
Last updated: 2026-04-15

Post by husarz17 on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Good to know there's a solution to this problem. I hope you'll be able to share it with me. I can't wait to hear about it.
Last updated: 2026-04-20

Post by skiper on Best practice to reduce CPU load ^{CODESYS Forge talk (Post)}
Hi ! I can't say exactly the best practice you can use to reduce your cpu load but you can use the codesys exemple. https://www.codesys.com/products/visualization/#c3876 Go to the midle of the page and you have a link to download an exemple.
Last updated: 2026-04-21

Post by charleskirkland on Connect to Azure IoT Hub ^{CODESYS Forge talk (Post)}
It sounds like your TLS setup is basically correct, since the handshake works via OpenSSL, so the issue is likely on the CODESYS side rather than the certificates themselves. From what I’ve seen with the Azure IoT Hub Client SL library, you should double-check that the SAS token is actually being generated and passed correctly to the function blocks (especially wsDeviceSaS) and that the MQTT/HTTPS FB is really triggered cyclically-otherwise the controller won’t initiate the connection at all. Also, make sure DNS, time (NTP), and full certificate chain trust are properly configured on the controller, since IoT Hub authentication depends on them even when using SAS tokens. Another thing worth checking is the library/runtime version-there are reports that certain versions changed behavior and caused connection issues. I’d recommend starting with the official demo project (AzureMQTTDemo) and comparing it step by step with your setup to see what’s missing or not triggered. Speed Stars
Last updated: 2026-04-27

Post by alex-n on Problem with keeping up the distance between two axes ^{CODESYS Forge talk (Post)}
We use Inovance AC802 as PLC, IS810N Drive, library 4.10, connection via Ethercat and no any suprise at work.
Last updated: 2026-06-02

Post by totorovic on Ladder editor bug with 3.5.21.20 ^{CODESYS Forge talk (Post)}
The update via CODESYS Installer fails (admin mode). Anyway I am switching all my POUs from Ladder to ST because Ladder cannot be used like this.
Last updated: 2026-06-02

Post by eschwellinger on Linux ARM64 Deploy Fail - Index out of range ^{CODESYS Forge talk (Post)}
Which Deploy Tool version is installed? the ssh login does work? If yes could we get a screenshot of the device information see my example:
Last updated: 2026-07-01

Post by eschwellinger on Linux ARM64 Deploy Fail - Index out of range ^{CODESYS Forge talk (Post)}
I would check the version of the deloy tool using the CODESYS installer. Sure manually installing works too, but woukd nice to know if there is a problem. Currebt version is 4.21.0.0 of the deploytool.
Last updated: 2026-07-01

Post by arj3090 on Linux ARM64 Deploy Fail - Index out of range ^{CODESYS Forge talk (Post)}
I used Tools->Deploy Control SL in the IDE that I downloaded yesterday. So I assume it is the latest version. I did a manual install using SSH and it works.
Last updated: 2026-07-01

Post by tristan on Codesys v3.5.22.10 - Internal error:System.AggregateException...Value cannot be null...Parameter name: expLValue ^{CODESYS Forge talk (Post)}
Hi, I have exactly the same issue when I try to update from 3.5.21.50 to 3.5.22.20. Currently I didn't find where is the problem. Hope somebody can find a way. Tristan
Last updated: 2026-07-17

Post by tvm on Generic Variables and FDB ^{CODESYS Forge talk (Post)}
I also ran into this, try using Coil<1> as the type in the FBD box. From what I understand, with VAR_GENERIC CONSTANT, the compiler creates separate data types for each different function block declaration.
Last updated: 2026-07-22

Post by somlioy on Beckhoff ESI import german text ^{CODESYS Forge talk (Post)}
Solved. Had to explicitly select English inside CODESYS as language instead of system default, which for my case is norwegian... Open Tools → Options → International Settings Set the development-system language to English Restart codesys
Last updated: 2026-07-28

Sort by relevance or date