Post by umair on Code for reading 4 address to get 1 value of sensor (Ethernet IP) ^{CODESYS Forge talk (Post)}
Hi all, I want to ask, how do I write code to read multiple address for Ethernet IP communication protocol? Because this multiple address will produce one reading of a sensor that I am currently using. I want to read the value of the sensor. https://global.discourse-cdn.com/business6/uploads/wago/original/1X/7a79f4ad7ce474b9383b8550356d984defd9f3a0.png The addresses are in Byte. The 4 addresses are 89,90,91,92. Thanks in advance. Best regards, Umair
Last updated: 2024-05-06

Post by paulorb on STRUCT AT %MW1000 ^{CODESYS Forge talk (Post)}
Hi I am trying to use STRUCT to parse commands from Modbus/TCP, Modbus client will fill the bytes related to a specific command (type, parameters), then PLC (Codesys) will access the command parameters. A STRUCT will simplify a lot the process of parsing the data, so I don't need to parse byte per byte, address will be mapped to a struct and I can use it for parsing the data. From what I understood, the compiler does not allow me to specify the location of the struct for a %MW register. VAR_COMMAND AT %MW1002: structGenericModbusCommand; This will throw: Bad declaration, use '%ML' for 'structGenericModbusCommand' variable But If I change it to %ML, when you go online you see that it is actually allocating the struct in another memory address. When we go online, on GVL we can see: VAR_COMMAND. structGenericModbusCommand %ML1002 commandType COMMANDTYPE %MB8016 ... %MB8020 I am not specifying a pointer or a reference it is a struct type, why is it mapping to a %MW location (random one). How can I control where it is mapping to? I need a consistent way to map STRUCT to specific modbus address. Is it possible? Thanks, Paulo Note I am using a Codesys OEM: Schneider Machine Expert Logic Builder (M241)
Last updated: 2024-08-13

Post by naks on Change IP address from IEC code ^{CODESYS Forge talk (Post)}
Hi, I'm working with wago 750-8212 controller. I want to change the IP address of the Ethernet adapter from webvisu. I have read some other threads in this forum and I have tried the following: Added the following text to the config file CODESYSControl.cfg: [SysSocket] Adapter.0.Name="br1" Adapter.0.EnableSetIpAndMask=1 Used the below code : IF xUpdateEthernet THEN Ethernet.Enable := FALSE; Reconfig ( xExecute := TRUE, itfNode := Ethernet, eError => ErrorReconfig, xBusy => xBusy, xDone => xDone, xError => xErrorReconfigure); IF Reconfig.xDone THEN ErrorCode := Ethernet.UpdateConfiguredIPSettings(IpAddress := NewIp, gateway := newGateway, subnetmask := newSubnetmask); END_IF IF Reconfig.xDone OR Reconfig.xError THEN reconfig(xExecute := FALSE); END_IF Ethernet.Enable := TRUE; Reconfig(xExecute := TRUE, itfNode := Ethernet ); END_IF I could change the IP address but when i restart my Controller then the IP address resets to the original, Is there anything I have missed, what else can i try ? Thank you in advance.
Last updated: 2024-07-08

Post by eschwellinger on More information on Device address [0058.A0DE] ^{CODESYS Forge talk (Post)}
no nowadays I would recommend connect by name. Which is the default I guess since some versions.
Last updated: 2024-11-22

Post by felipemsgarcia on Axis EtherCAT address ^{CODESYS Forge talk (Post)}
Hello, Thank you for your answer. I'm afraid I was not clear on what I was trying to achieve. I'm trying to change parameters and command axes from inside a function block and the first thing that came to my mind was pass both the EtherCAT slave and axis to the function block (as image attached). But, I believe it's worse than just pass directly the EtherCAT slave address to the function block (is it???). However I was wondering if there was a way to get the EtherCAT address directly from the axis, so I don't need to pass the EtherCAT slave nor the EtherCAT address to the function block. Thank you again!
Last updated: 2025-03-07

Post by eschwellinger on Error while using UpdateConfiguredIPSettings to change IP address ^{CODESYS Forge talk (Post)}
check the plclog for the error on doing this
Last updated: 2023-12-12

Post by dkugler on How to address visualization change with button press... ^{CODESYS Forge talk (Post)}
you can get the help by yourself in the helpme site: https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_operator_move.html
Last updated: 2024-02-13

Post by jinlee on IP address of connected webvisu = 127.0.0.1 ^{CODESYS Forge talk (Post)}
Hi, Did you manage to solve the problem ? I have the same issue of reading 127.0.0.1 only.
Last updated: 2024-03-11

Post by dhumphries on How to address visualization change with button press... ^{CODESYS Forge talk (Post)}
you can configure the button actions in the hotkey tab in the visualization.
Last updated: 2024-03-15

Post by paro on Which Lib to use, connect to a socket with URL instead of IP address ^{CODESYS Forge talk (Post)}
hi, maybe Net Base Services https://forge.codesys.com/prj/codesys-example/nbs/home/Home/
Last updated: 2024-06-17

Post by davidbo on How to stop dhcpcd and use SysSockSetIpAddressAndNetMask to set address? ^{CODESYS Forge talk (Post)}
The reason for why CODESYS halts was a CODESYS watchdog exception. 'sudo ip' takes a long time.
Last updated: 2025-11-04

Post by adam on Get/Set I/O Address Mapping of DeviceObjects in python Script ^{CODESYS Forge talk (Post)}
Found out.Its script engine bug . Update to script engine version 4.2.0.0. and problem solved
Last updated: 2025-11-17

Post by ahuckphin on Issues with Modbus Slave with Raspberry Pi ^{CODESYS Forge talk (Post)}
codesyscontrol_user.cfg [SysCom] Linux.Devicefile.1 = /dev/ttyUSB0 portnum:=COM.SysCom.SYS_COMPORT1; **parameters are used in the python-script ** method: "rtu" port: "COM8" baudrate: 9600 stopbits: 1 bytesize: 8 parity: 'N' timeout: 1 register address for humidity: 0x000 register address for temperature: 0x001 unit ID: 1 **parameteized in the modbus-master-comport ** see attached files
Last updated: 2024-07-11

Post by dhumphries on WAGO PLC 200 750-8216 Ethernet connection to Codesys 3.5 ^{CODESYS Forge talk (Post)}
make sure the PLC and the programming PC have IP addresses that are on the same subnet, you'll have to know the default address of the PLC or you may need to connect to it with a special cable and use a software tool to set the IP address.
Last updated: 2024-02-06

Post by matt-purcell on Which Lib to use, connect to a socket with URL instead of IP address ^{CODESYS Forge talk (Post)}
I've been searching through these libraries, syssocket and net base services and they all seem to use the same structure for IP address for the connect function, SOCKADDRESS. At a glance, it doesn't look like that'll work, maybe it's just missing in the documentation somewhere?? I'm wondering if anyone has done it.
Last updated: 2024-06-17

Post by simotion on Pointer to Softmotion axis ^{CODESYS Forge talk (Post)}
In my projet I use Softmotion. There are several Softmotion axis (type SM_Drive_Virtual). In the Global Variable List I have an array of pointers to the adress of the Axis. Axis : ARRAY[1..iMaxCntAxes] OF POINTER TO AXIS_REF_SM3 := ADR(AX01_Axis), // [1 ADR(AX02_Axis), // [2] This works, but when compiling I get the message : . [WARNING] E3D: GVL Device: PLC Logic: Application: C0564: A reference to uninitialized variable AX01_Axis is used for initialization of Axis. Accessing the uninitialized variable may result in unexpected behavior. [WARNING] E3D: GVL Device: PLC Logic: Application: C0564: A reference to uninitialized variable AX02_Axis is used for initialization of Axis. Accessing the uninitialized variable may result in unexpected behavior. Is there a way when initializing to force the hardware (softmotion axis) to first initialize and then the Global Variable List?
Last updated: 2023-10-25

Post by rshabsh on Using Latch Variable in Alarm as input from text list ^{CODESYS Forge talk (Post)}
I am currently utilizing Alarm Manager’s Latch Variable 1 to display additional information related to alarms. However, instead of mapping this latch variable to a fixed PLC variable, I would like to dynamically update its text content based on the selected language in the system. To achieve this, I am considering using a text list that corresponds to different languages rather than directly linking Latch Variable 1 to a PLC variable. This approach would allow the displayed alarm information to be automatically translated according to the active language setting. Could you please confirm if this method is feasible within the Alarm Manager configuration? Additionally, if there are specific steps or best practices to follow when implementing this functionality, I would appreciate any guidance you can provide. Looking forward to your insights.
Last updated: 2025-02-26

Post by hemuv on Open Numpad with VU.FbOpenDialogExtended ^{CODESYS Forge talk (Post)}
Hello Barton, I try to log the changes in Numpad (upon Ok button pressed) that an Element name/Element text variable is changed from so to so. How to get the Element name (or text fields Text Variable) from where the Numpad is called? Numpad is Invoked from Inputconfiguration->onMouseDown->Write a variable. Thanks
Last updated: 2024-11-07

Post by bjarne-pagaard on Multiple WebVisu ^{CODESYS Forge talk (Post)}
You can use the switch frame variable, but there should be a variable for each active visu user. You can put the switch frame variable in an array, and use CURRENTCLIENTID as index into the array to get what you want. The CURRENTCLIENTID is assigned to new users automagically by the Visu Management.
Last updated: 2024-03-14

Post by kumareasu on Persistent variable storage ^{CODESYS Forge talk (Post)}
Is there any function function block which can store the persistent variable in HDD/SSD immediatley. My observation is that the persistent variable is getting stored when we shut down or restart the system (Windows+ CoDeSys RTE SL ). the persistent variables are not stored in HDD/SSD, if I power off the system without proper shutdown. Seeking your feedback.
Last updated: 2024-06-12

Post by mawaloc on IMAGE DISPLAY ACCORDING TO INPUT VARIABLE ^{CODESYS Forge talk (Post)}
Hello thank you to all, it's work regards
Last updated: 2023-08-17

Post by totorovic on Pointer to Softmotion axis ^{CODESYS Forge talk (Post)}
I get the same warning message with initialized variable. Codesys 3.5.19.20
Last updated: 2023-11-09

Post by timvh on I want to show the current recipe name in the visualization screen ^{CODESYS Forge talk (Post)}
Maybe the easiest solution for you is to add one STRING variable to your recipe and enter the name of the recipe in variable value. This is little bit double the work (naming the recipe and entering the value of the STRING variable), but in that case you always have the current value of the variable which you can read from the application and show in the visualization.
Last updated: 2025-09-04

Post by andreag0 on How to access to variable value through symbolic string name ^{CODESYS Forge talk (Post)}
No
Last updated: 2024-06-13

Post by timvh on OSCAT Scale_r function not working in LD 4.60 works in LAD2 on 3.5.21sp3 ^{CODESYS Forge talk (Post)}
It seems like a bug in FBD. Work-around: If you click on the small line between the box and the output variable and delete this, the variable is removed. When you then assign a variable again (Ctrl-A), then you will see that the line will be a bit longer. If you then select the previous variable, you will see that it works.
Last updated: 2025-10-26

Sort by relevance or date