CODESYS Forge - CODESYS Forge / Talk / Search

<< < 1 .. 182 183 184 185 186 > >> (Page 184 of 186)

Post by kporter on Codesys EtherCAT Driver (CmpEt1000MPD) can't set MAC address ^{CODESYS Forge} ^talk ^(Post)
EtherCAT is a point-to-point protocol so it doesn't need a unique MAC address. It would be very useful to set the MAC address to 020000000000, the standard address for this kind of application. (The important bit is the 02 at the start of the address, which means locally-administered MAC.) The stock Windows driver can do this for my i210 card. But the CODESYS CmpEt1000MPD driver cannot. The image shows the setting with the Windows driver. If I set all my customers' cards to this address, then I don't need to deal with this when deploying my application. A simple PowerShell script can be used to set the MAC address once when the NIC is installed and the driver is changed.
Last updated: 2026-02-09

Post by yannickasselin on Question about Demo License limitations for Modbus TCP communication and Fieldbus Instances ^{CODESYS Forge} ^talk ^(Post)
As far as I know, there is no other limitations than the 2 hours limit. The demo mode should be plenty enough for testing purposes. Regarding instances. In the device tree, 1 master = 1 instance, no matter how many slaves the master is communicating with. But it is also possible that your Codesys runtime act as a slave. In this case, each slave in the device tree is one instance. You can also use the license metric tool in the IDE. This will tell you exactly how many instances you have in your project. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_edt_device_licensed_software_metrics.html
Last updated: 2026-02-28

Post by gordonkeller360 on Escape character behavior for hex values in string -- what gives? ^{CODESYS Forge} ^talk ^(Post)
I have a program which sequentially places byte representations of characters from a string into an array. FUNCTION_BLOCK MoveBytesFromString VAR_IN_OUT abRxBuf: ARRAY [0..79] OF BYTE; END_VAR VAR testString : STRING := '$0A$R$L$TTesting,123...$94$86$0A'; iCount: DINT; END_VAR ---------------------------------------------------------------------------------------- // clear the buffer MEM.MemFill(ADR(abRxBuf), 80, 0); FOR iCount := 0 TO LEN(testString) - 1 DO // account for undesired null terminator of string abRxBuf[iCount] := testString[iCount]; END_FOR Escaped characters, like $T, $N, etc. work just fine, and so do their hex representation counterparts ($09, $0A, etc). However, when I put something like $94, I get a set of nonsense values... see image attached after one spin of the program. Could someone explain to me what is happening here? I'll continue to investigate...
Last updated: 2026-03-09

Post by thierry-b on CODESYS device discovery performance in large networks (/16) ^{CODESYS Forge} ^talk ^(Post)
Hello, We are using CODESYS 3.5 SP19.70 in an educational environment with several WAGO PFC200 controllers (CODESYS Runtime). Our campus network is currently configured as a /16, which creates a very large broadcast domain. We observe slow device discovery and long scan times when opening the network view. Before restructuring our architecture, we would like to know the recommended network practices for CODESYS: Recommended broadcast domain size for device discovery Possible impact of large networks (/16) on scan performance Usual recommendations (VLANs, /24 segmentation, etc.) Known limitations or points of attention in extended networks Any guidance or official recommendations would be very helpful. Thank you.
Last updated: 2026-03-29

Post by vstrom on Codesys v3.5.22.10 - Fail to create a project Archive ^{CODESYS Forge} ^talk ^(Post)
Hi to all, I've created a project using the File->New Project-> Standard Project command. Then I've add the object "Visualization Manager" and then tried to create a project archive (File->Project Archive->Save Archive), but it fails with the error "Access to the path 'C:\Program Files\CODESYS 3.5.22.10\CODESYS\Common\3hxi4iod.put' is denied". The idicated file don't exist. First time of use of the new Codesys versionù, I've reinstalled the developement software but nothing change. If I don't add the Visualization part, the archive is created, it's seems to be a problem with the HMI part. Any ideas? Thanks
Last updated: 17 hours ago

Post by alexgooi on Network variable stops sending ^{CODESYS Forge} ^talk ^(Post)
Hi Reinier, What usually works for me is settings it up in the following way: In the sender block make sure that the list identifier is unique for the whole installation (this is only relevant when you have multiple senders in 1 network). When you are linking the NVL to a file make sure that the path to this file doesn't change. In my experience the NVL stops working when you change the working directory and afterwards open the NVL in de Codesys IDE. If this doesn’t apply to you application, you could also try to change the port number, maybe there is an other process making use of port 1202. Kind regards Alex
Last updated: 18 hours ago

Post by timvh on Get Alarm status in Codesys ^{CODESYS Forge} ^talk ^(Post)
You are right, that you can use the GetState method, but it is not that simple. You first have to get a list of (filtered) alarms from the AlarmManager. You can find an example in Forge how to do this. See https://forge.codesys.com/prj/codesys-example/alarm-manager/home/Home/ Then you can go through this list to get the state of all the (filtered) alarms. See below the code which you could use. This is all based on the example from forge. Create a program: // This example shows how to access alarms via structured text. PROGRAM PLC_PRG VAR xInit : BOOL := TRUE; udiResult : UDINT; fbAlarmFilterCriteriaAll : FB_AlarmFilterCriteriaAll; fbAlarmManagerClient : FB_AlarmManagerClient; itfAlarmManagerClient : IAlarmManagerClient := fbAlarmManagerClient; xAlarm1 : BOOL; xAlarm2 : BOOL; xWarning : BOOL; iNrOfAlarmsInAlarmList : INT; iNrOfActiveAlarmsInAlarmList : INT; paitfAlarm: POINTER TO ARRAY [0..0] OF AlarmManager.IAlarm; iAlarmIndex : INT; eAlarmState: AlarmManager.AlarmState; END_VAR IF xInit THEN xInit := FALSE; fbAlarmManagerClient.itfAlarmFilterCriteria := fbAlarmFilterCriteriaAll; // register alarm client to get updated about alarm status / changes udiResult := AlarmManager.g_AlarmHandler.RegisterClient(itfAlarmManagerClient, 0, 0); END_IF // Polling the number of alarms udiResult := AlarmManager.g_AlarmHandler.GetActiveAlarms(itfAlarmManagerClient, parritfActiveAlarms => paitfAlarm, iCountActiveAlarms => iNrOfAlarmsInAlarmList); iAlarmIndex := 0; iNrOfActiveAlarmsInAlarmList := 0; WHILE iAlarmIndex < iNrOfAlarmsInAlarmList DO eAlarmState := paitfAlarm^[iAlarmIndex].GetState(); IF eAlarmState = AlarmManager.AlarmState.Active OR eAlarmState = AlarmManager.AlarmState.ActiveAcknowledged THEN iNrOfActiveAlarmsInAlarmList := iNrOfActiveAlarmsInAlarmList + 1; END_IF iAlarmIndex := iAlarmIndex + 1; END_WHILE See below some details about the function blocks: One function block should implement the IAlarmFilterCriteria interface. This can be empty except a few methods. FUNCTION_BLOCK FB_AlarmFilterCriteriaAll IMPLEMENTS AlarmManager.IAlarmFilterCriteria Method implementation (others related to interface are empty) METHOD AreAllAlarmClassesSelected : BOOL AreAllAlarmClassesSelected := TRUE; METHOD AreAllAlarmGroupsSelected : BOOL AreAllAlarmGroupsSelected := TRUE; METHOD GetPriorityFrom : USINT GetPriorityFrom := 0; METHOD GetPriorityTo : USINT GetPriorityTo := 255; The other function block should implement IAlarmManagerClient and get a reference to the FB which implements the IAlarmFilterCriteria FUNCTION_BLOCK FB_AlarmManagerClient IMPLEMENTS AlarmManager.IAlarmManagerClient VAR_INPUT itfAlarmFilterCriteria: AlarmManager.IAlarmFilterCriteria; END_VAR Method implementation (others related to the interface are empty) METHOD GetFilterCriteria : AlarmManager.IAlarmFilterCriteria // see VAR_INPUT for filter GetFilterCriteria := itfAlarmFilterCriteria; Off course you have to add the AlarmManager to your application and add some alarms to it.
Last updated: 2025-09-02

Post by gunstr on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge} ^talk ^(Post)
I now tried to install 4.17.0.0 on a fully clean installations: A brand new RPi 4B Install latest Raspberry Pi OS Lite, Release date 13 May 2025, 64bit run sudo apt update && sudo apt full-upgrade When asked - Select to install the updated version of '/etc/initramfs-tools/initramfs.conf' Install CODESYS Control for Raspberry Pi SL. version 4.17.0.0 Log output: [INFORMATION] Connected successfully! [INFORMATION] Successfully connected to target (192.168.0.197) [WARNING] No supported container engine found on device. You have to install a supported container engine to use Virtual Control. Please contact the Administrator of the device. [WARNING] Error detecting container architecture [INFORMATION] Finished reading device information [ERROR] Error output: /var/lib/dpkg/info/codesyscontrol.postinst: 88: check_legacy_extensionapi_folder: not found [INFORMATION] Standard output: Selecting previously unselected package codesyscontrol. [INFORMATION] Standard output: (Reading database ... 76772 files and directories currently installed.) [INFORMATION] Standard output: Preparing to unpack .../codesyscontrol_raspberry_4.17.0.0_all.deb ... [INFORMATION] Standard output: Unpacking codesyscontrol (4.17.0.0) ... [INFORMATION] Standard output: Setting up codesyscontrol (4.17.0.0) ... [INFORMATION] Standard output: make config rw [INFORMATION] Standard output: set folder permissions [INFORMATION] Standard output: prepare permissions [INFORMATION] Standard output: check legacy extension api folder [INFORMATION] Standard output: create and install daemon [INFORMATION] Standard output: codesyscontrol started [WARNING] Unable to detect Raspberry Pi Architecture. Setting armv6l as default, you can change this through the settings panel. [INFORMATION] Standard output: codesyscontrol stopped [ERROR] Expected exit value of command failed: expected 0, received 1 [WARNING] Error setting the Raspberry Pi Architecture [ERROR] Error installing codesyscontrol If I read the log correctly the control is actually installed but cannot start. I'm running out of ideas how to proceeed now, any suggestions are welcome.
Last updated: 2025-09-03

Post by e13740e on Сalling the context menu from the keyboard ^{CODESYS Forge} ^talk ^(Post)
Hello. I have a question for you, perhaps you have an answer to it. Regarding calling the Context menu from the keyboard in Devices, specifically calling the context menu window from the keyboard via an assigned combination. Goal: to have the ability to navigationally add internal Objects (Methods, Properties) to Function Blocks from the keyboard without using the mouse. The Codesys environment interface does not allow Windows access to this via Shift+F10. Externally (outside the Codesys environment), the hotkey call for the context menu (Shift+F10) from the keyboard works in various environments, but at the same time, in Codesys it does not (it doesn't work). I have already tried various options on my own to achieve this (but unsuccessfully): Tools\Customize\Keyboard\Objects (the set combination does not give the desired result) Tools\Customize\Keyboard\Objects... (the set combination is extremely useful as it provides access to adding objects directly to Devices but does not provide the ability to add an internal object (Method/Property) to a Function Block). Thank you in advance for your help!!! P.S. I have already started trying to implement a script-based solution to call the context menu via AutoHotkey - by relocating the mouse cursor to the area of the navigational selection with a subsequent call of the context menu on it and relocating the mouse cursor back to its initial position. And in order not to "reinvent the wheel," I am writing this request to you!!!
Last updated: 2025-10-05

Post by umdee on Error when monitoring LAD programs ^{CODESYS Forge} ^talk ^(Post)
I get the following error when monitoring my program (see attached screenshots): "Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately. Value cannot be null. Parameter name: source. And the details say: See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ** Exception Text ** System.ArgumentNullException: Value cannot be null. Parameter name: source at System.Linq.Enumerable.Any[TSource] (IEnumerable1 source, Func2 predicate) at _3S.CoDeSys.NWLEditor.NWLTextCell.OnPaintCellLayer(PaintEventArgs e) at _3S.CoDeSys.Controls.Controls.GfxEdControl.PaintCellCellLayer(PaintEventArgs e, GfxCell cell) at _3S.CoDeSys.Controls.Controls.GfxEdControl.PaintCellCellLayer(PaintEventArgs e, GfxCell cell) at _3S.CoDeSys.Controls.Controls.GfxEdControl.PaintCellCellLayer(PaintEventArgs e, GfxCell cell) at _3S.CoDeSys.Controls.Controls.GfxEdControl.OnPaint(PaintEventArgs e) at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer) at System.Windows.Forms.Control.WmPaint(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.UserControl.WndProc(Message& m) at _3S.CoDeSys.Controls.Controls.GfxEdControl.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ** Loaded Assemblies ** (3000 lines of assemblies) ** JIT Debugging ** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitdebugging="true"> </system.windows.forms></configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box The windows show red X's where the networks should be. Any advice on how to fix this? Additional Information PLC used: Wago 750-8212, Firmware FW26 Startup profile: CODESYS V3.5 SP19 Patch 5 OS version: Microsoft Windows NT 10.0.22631.0 .NET version: 4.0.30319.42000 Full Version info attached as .txt
Last updated: 2024-03-17

Post by wildcard on Modbus Client Request Not Processed ^{CODESYS Forge} ^talk ^(Post)
Hi, does anyone has a solution for this issue. I've the same problem. I've implemented a very simple client based on the Modbus Examples and connected the soft PLC to a Modbus Simulator. PROGRAM ModbusClient VAR initDone : BOOL := FALSE; errorID : ModbusFB.Error; client : ModbusFB.ClientTCP; timeout : UDINT := 500000; replyTimeout : UDINT := 200000; aUINT : ARRAY [0..8] OF UINT; clientRequestReadHoldingRegisters : ModbusFB.ClientRequestReadHoldingRegisters; clientRequestsCnt : UINT := 0; clientRequestsProcessCnt : UINT := 0; ipAddress : ARRAY[0..3] OF BYTE := [10,54,0,72]; END_VAR IF NOT initDone THEN initDone := TRUE; client(aIPaddr:=ipAddress, udiLogOptions:=ModbusFB.LoggingOptions.All); client(xConnect:=TRUE, ); clientRequestReadHoldingRegisters(rClient:=client, udiTimeOut:=timeout, uiUnitId:=1, uiStartItem:=0, uiQuantity:=4, pData:=ADR(aUINT[0]), udiReplyTimeout:=replyTimeout); clientRequestReadHoldingRegisters.xExecute := TRUE; clientRequestsCnt := 0; END_IF clientRequestReadHoldingRegisters(rClient:=client, udiTimeOut:=timeout, uiUnitId:=1, uiStartItem:=0, uiQuantity:=4, pData:=ADR(aUINT[0]), udiReplyTimeout:=replyTimeout, xExecute := TRUE); IF clientRequestReadHoldingRegisters.xError THEN clientRequestsCnt := clientRequestsCnt +1 ; errorID := clientRequestReadHoldingRegisters.eErrorID; END_IF clientRequestReadHoldingRegisters(rClient:=client, udiTimeOut:=timeout, uiUnitId:=1, uiStartItem:=0, uiQuantity:=4, pData:=ADR(aUINT[0]), udiReplyTimeout:=replyTimeout, xExecute := NOT clientRequestReadHoldingRegisters.xExecute); When the system is running I do get the following on the logs: 2024-05-13T10:18:07.443Z: Cmp=MODBUS lib, Class=1, Error=0, Info=0, pszInfo= Client.RequestProcessed ClientRequest,16#0164ADC561A0 unitId=1 fc=ReadHoldingRegisters id=2070 state=Error 2024-05-13T10:18:07.443Z: Cmp=MODBUS lib, Class=1, Error=0, Info=0, pszInfo= ClientRequest,16#0164ADC561A0 unitId=1 fc=ReadHoldingRegisters id=2070 change state Error -> None timestamp=63843421226 2024-05-13T10:18:08.444Z: Cmp=MODBUS lib, Class=1, Error=0, Info=0, pszInfo= ClientRequest,16#0164ADC561A0 unitId=1 fc=ReadHoldingRegisters id=2071 change state None -> Init timestamp=63844421420 2024-05-13T10:18:09.444Z: Cmp=MODBUS lib, Class=1, Error=0, Info=0, pszInfo= ClientRequest,16#0164ADC561A0 unitId=1 fc=ReadHoldingRegisters id=2071 change state Init -> Error timestamp=63845421675 But the errorID is jumping between OK and RequestNotProcessed. Any help is very appreciated which gives me a hint what I'm doing wrong. Thanks
Last updated: 2024-05-13

Post by anonymous on Hi, I try to send and receive data using a UDP connection via SysSocket 3.5.17.0. While sending data works fine, I have problems with the receiving part. I am able to capture the received data of client side in wireshark But unable to capture it on the codesys ^{CODESYS Forge} ^talk ^(Post)
Hi, I try to send and receive data using a UDP connection via SysSocket 3.5.17.0. While sending data works fine, I have problems with the receiving part.I am able to capture the data of client side in wireshark but i am unable to capture it in the codesys. Heres the below part of code of client side. PROGRAM POU_udpclient_program VAR istep : INT := 1;//step variable for state machine xStart: BOOL;// Flag to start the UDP protocol iecSocketId: syssocket_interfaces.RTS_IEC_HANDLE;//socket handle for receiving iecCreateResult: syssocket_interfaces.RTS_IEC_RESULT; ipAddr: syssocket.SOCKADDRESS;//Socket address structure for receiving sIpAddress : STRING := '192.168.0.2'; wPort: WORD:= 12346; iecConnectResult : syssocket_interfaces.RTS_IEC_RESULT;//connect paramters sDataRec : STRING[255];//Buffer for received data xiRecBytes : __XINT;//number of bytes received iecRecResult : syssocket_interfaces.RTS_IEC_RESULT;//receive data parameters iecCloseResult : syssocket_interfaces.RTS_IEC_RESULT; END_VAR syssocket.SysSockInetAddr(sIpAddress,ADR(ipAddr.sin_addr)); ipAddr.sin_family := syssocket.SOCKET_AF_INET; ipAddr.sin_port := syssocket.SysSockHtons(wPort); CASE istep OF 1: //create socket IF xStart THEN iecSocketId:= syssocket.SysSockCreate(syssocket.SOCKET_AF_INET,syssocket.SOCKET_DGRAM,syssocket.SOCKET_IPPROTO_IP,ADR(iecCreateResult)); IF iecSocketId = syssocket_interfaces.RTS_INVALID_HANDLE THEN xStart := FALSE; istep := 1; ELSE istep := 2; END_IF END_IF 2: //connect to socket server using setoption iecConnectResult := syssocket.SysSockSetOption(iecSocketId,syssocket.SOCKET_SOL,syssocket.SOCKET_SO_REUSEADDR,ADR(ipAddr),SIZEOF(ipAddr)); istep := 3; 3: //receive data xiRecBytes := syssocket.SysSockRecvFrom(iecSocketId,ADR(sDataRec),SIZEOF(sDataRec),0,ADR(ipAddr),SIZEOF(ipAddr),ADR(iecRecResult)); istep := 4; 4: //close socket iecCloseResult:= syssocket.SysSockClose(iecSocketId); xStart := FALSE; istep := 1; END_CASE
Last updated: 2024-06-03

Post by raghusingh77 on $100 OFF + 10% FLAT DISCOUNT ON TEMU USE ACU934948 THIS COUPON CODE FOR EVERY SHOPPING ^{CODESYS Forge} ^talk ^(Post)
Temu is your go-to online shopping destination. With the $100 off coupon code [ACU934948], you can enjoy incredible savings on your purchases. This article will explore everything you need to know about the latest offers, including discounts for new users, existing customers, and seasonal promotions throughout 2024. Get $100 Off with Temu Coupon Code [ACU934948] The highlight of shopping at Temu right now is the $100 off coupon code [ACU934948]. This code provides a flat discount on your order value, making it easier than ever to save money while shopping for your favorite items. Whether you’re interested in fashion, electronics, or home goods, this coupon is a fantastic way to maximize your savings. Exclusive Discounts for First-Time Users New to Temu? You’re in luck! By redeeming the free Temu coupon code [ACU934948], first-time users can enjoy an additional 30% discount on their first order. This is a perfect opportunity to explore Temu’s extensive catalog while enjoying significant savings. Additionally, the Temu new user coupon [ACU934948] offers up to 75% off your first purchase, ensuring that you get the best possible deal as you start your shopping journey. 30% Off Temu Coupons, Promo Codes + 25% Cash Back [ACU934948] Redeem Temu Coupon Code [ACU934948]. TEMU COUPON $100 OFF [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS [ACU934948] TEMU COUPON $100 OFF FIRST ORDER [ACU934948] TEMU COUPON $100 OFF REDDIT [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS REDDIT [ACU934948] TEMU COUPON $100 OFF NEW USER [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS 2024 [ACU934948] TEMU COUPON $100 OFF CODE [ACU934948] TEMU COUPON $100 OFF FIRST ORDER FREE SHIPPING [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING USA [ACU934948] TEMU COUPON $100 OFF HOW DOES IT WORK [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS CANADA [ACU934948] TEMU COUPON $100 OFF 2024 [ACU934948] TEMU COUPON $100 OFF FOR NEW CUSTOMERS [ACU934948] TEMU COUPON $100 OFF CANADA [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FIRST ORDER [ACU934948] TEMU 100 OFF COUPON BUNDLE [ACU934948] Massive October Promotions: Up to 90% Off October 2024 is an exciting month for shoppers at Temu. With the Temu coupon code [ACU934948], customers can access discounts of up to 90% off select items during this promotional period. From seasonal items to everyday essentials, there’s something for everyone at unbeatable prices. Temu Rewards Program for Existing Customers Temu values its loyal customers through its comprehensive Rewards Program. Existing customers can also take advantage of the $100 off coupon code [ACU934948] to enjoy significant discounts on their orders. This program not only provides exclusive deals but also allows customers to earn points that can be redeemed for future purchases. Plus, eligible purchases may yield up to 25% cash back, making it even more rewarding to shop at Temu. Bundle Offers: Flat Discounts and More In addition to the flat $100 discount, Temu offers bundle promotions that combine various discounts for even greater savings. With the Temu coupon bundle [ACU934948], customers can receive a flat $100 off along with potential savings of up to 70% on select items. This makes it easier than ever to stock up on your favorite products without breaking the bank. 100 COUPON CODES [ACU934948] 1 BUCKS TO PHP [ACU934948] IS THERE A COUPON IN THE PHILIPPINES [ACU934948] 100 BUCKS TO PHP [ACU934948] TEMU $100 OFF COUPON [ACU934948] TEMU $100 OFF CODE [ACU934948] TEMU 100 VALUE COUPON BUNDLE [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING [ACU934948] TEMU 100 OFF COUPON CODE LEGIT [ACU934948] TEMU 100 OFF COUPON CODE REDDIT [ACU934948] TEMU 100 OFF COUPON CODE FOR EXISTING USERS [ACU934948] TEMU 100 OFF COUPON CODE UK [ACU934948] TEMU COUPON CODE $100 OFF FREE SHIPPING [ACU934948] TEMU COUPON CODES 100 PERCENT OFF [ACU934948] WHAT IS A HIGH COUPON RATE [ACU934948] HOW TO CALCULATE COUPON RATE WITHOUT COUPON PAYMENT [ACU934948] WHAT IS THE COUPON RATE [ACU934948] HOW TO CALCULATE COUPON VALUE [ACU934948] USING COUPONS AND REBATES TO LOWER THE PRICE OF AN ITEM IS AN EXAMPLE OF [ACU934948] TEMU 100 DOLLAR OFF COUPON [ACU934948] DOMINOS COUPON CODE 100 OFF [ACU934948] DOMINO'S 100 RS OFF COUPON CODE [ACU934948] TEMU COUPON $100 OFF EXISTING CUSTOMERS [ACU934948] WHAT IS 10 OFF 100 DOLLARS [ACU934948] 100 OFF PROMO CODE [ACU934948] 1 CASHBACK ON 100 DOLLARS [ACU934948] IS TEMU 100 OFF COUPON LEGIT [ACU934948] TEMU COUPON $100 OFF [ACU934948] TEMU COUPON $100 OFF LEGIT [ACU934948] Temu Coupon Code $100 OFF [ACU934948] How to Redeem Your Coupons Redeeming your coupons at Temu is simple: Browse Products: Start by exploring Temu’s wide range of items. Add Items to Cart: Once you find what you want, add it to your shopping cart. Enter Coupon Code: At checkout, enter the coupon code [ACU934948] in the designated field and click "Apply." Complete Your Purchase: Review your discounted total before finalizing your order. Tips for Maximizing Your Savings Stacking Discounts: While you cannot apply multiple codes in one transaction, ensure you're using the most beneficial promo available. Lightning Deals: Keep an eye out for limited-time "Lightning Deals" that can offer discounts of up to 80%. Free Shipping Offers: Enjoy free standard shipping on all orders, enhancing the value of your purchases. Conclusion With competitive pricing and generous promotional offers like the $100 off coupon code [ACU934948], Temu stands out as a premier choice for savvy shoppers seeking great deals. Whether you're a new user eager to explore or an existing customer ready to reap rewards, Temu provides ample opportunities for significant savings on your purchases. Don’t miss out—redeem your coupons today and enjoy an exceptional shopping experience filled with incredible value!
Last updated: 2024-10-26

Post by raghusingh77 on Get $100 Off Temu Coupon Code [ACU934948] | + 30% Discount ^{CODESYS Forge} ^talk ^(Post)
If you're looking for unbeatable deals on a wide range of products, Temu is the place to shop. With the $100 off coupon code [ACU934948], you can enjoy significant savings on your purchases. This article will dive into the various promotions available, including discounts for new users, existing customers, and special offers throughout October 2024. Get $100 Off with Temu Coupon Code [ACU934948] One of the standout offers from Temu is the $100 off coupon code [ACU934948]. This code allows you to receive a flat discount on your order value, making it easier than ever to save money while shopping. Whether you're buying clothing, electronics, or home goods, this coupon is a fantastic way to maximize your savings. Exclusive Discounts for First-Time Users For those new to Temu, there's even more good news! By redeeming the free Temu coupon code [ACU934948], first-time users can enjoy an additional 30% discount on their initial purchase. This is a great opportunity to explore Temu's extensive catalog while enjoying substantial savings. Additionally, new users can take advantage of the Temu new user coupon [ACU934948], which offers up to 75% off on their first order. Massive October Promotions: Up to 90% Off October 2024 is shaping up to be an incredible month for deals at Temu. With the Temu coupon code [ACU934948], shoppers can access discounts of up to 90% off select items during this promotional period. Whether you're looking for seasonal items or everyday essentials, now is the perfect time to shop. Temu Rewards Program for Existing Customers Temu values its loyal customers through its comprehensive Rewards Program. Existing customers can also use the $100 off coupon code [ACU934948] to enjoy significant discounts on their orders. This program not only provides exclusive deals but also allows customers to earn points that can be redeemed for future purchases. Plus, eligible purchases may yield up to 25% cash back, making it even more rewarding to shop at Temu. Bundle Offers: Flat Discounts and More In addition to the flat $100 discount, Temu offers bundle promotions that combine various discounts for even greater savings. With the Temu coupon bundle [ACU934948], customers can receive a flat $100 off along with potential savings of up to 70% on select items. This makes it easier than ever to stock up on your favorite products without breaking the bank. 30% Off Temu Coupons, Promo Codes + 25% Cash Back [ACU934948] Redeem Temu Coupon Code [ACU934948]. TEMU COUPON $100 OFF [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS [ACU934948] TEMU COUPON $100 OFF FIRST ORDER [ACU934948] TEMU COUPON $100 OFF REDDIT [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS REDDIT [ACU934948] TEMU COUPON $100 OFF NEW USER [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS 2024 [ACU934948] TEMU COUPON $100 OFF CODE [ACU934948] TEMU COUPON $100 OFF FIRST ORDER FREE SHIPPING [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING USA [ACU934948] TEMU COUPON $100 OFF HOW DOES IT WORK [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS CANADA [ACU934948] TEMU COUPON $100 OFF 2024 [ACU934948] TEMU COUPON $100 OFF FOR NEW CUSTOMERS [ACU934948] TEMU COUPON $100 OFF CANADA [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FIRST ORDER [ACU934948] TEMU 100 OFF COUPON BUNDLE [ACU934948] 100 COUPON CODES [ACU934948] 1 BUCKS TO PHP [ACU934948] IS THERE A COUPON IN THE PHILIPPINES [ACU934948] 100 BUCKS TO PHP [ACU934948] TEMU $100 OFF COUPON [ACU934948] TEMU $100 OFF CODE [ACU934948] TEMU 100 VALUE COUPON BUNDLE [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING [ACU934948] TEMU 100 OFF COUPON CODE LEGIT [ACU934948] TEMU 100 OFF COUPON CODE REDDIT [ACU934948] TEMU 100 OFF COUPON CODE FOR EXISTING USERS [ACU934948] TEMU 100 OFF COUPON CODE UK [ACU934948] TEMU COUPON CODE $100 OFF FREE SHIPPING [ACU934948] TEMU COUPON CODES 100 PERCENT OFF [ACU934948] WHAT IS A HIGH COUPON RATE [ACU934948] HOW TO CALCULATE COUPON RATE WITHOUT COUPON PAYMENT [ACU934948] WHAT IS THE COUPON RATE [ACU934948] HOW TO CALCULATE COUPON VALUE [ACU934948] USING COUPONS AND REBATES TO LOWER THE PRICE OF AN ITEM IS AN EXAMPLE OF [ACU934948] TEMU 100 DOLLAR OFF COUPON [ACU934948] DOMINOS COUPON CODE 100 OFF [ACU934948] DOMINO'S 100 RS OFF COUPON CODE [ACU934948] TEMU COUPON $100 OFF EXISTING CUSTOMERS [ACU934948] WHAT IS 10 OFF 100 DOLLARS [ACU934948] 100 OFF PROMO CODE [ACU934948] 1 CASHBACK ON 100 DOLLARS [ACU934948] IS TEMU 100 OFF COUPON LEGIT [ACU934948] TEMU COUPON $100 OFF [ACU934948] TEMU COUPON $100 OFF LEGIT [ACU934948] Temu Coupon Code $100 OFF [ACU934948] How to Redeem Your Coupons Redeeming your coupons at Temu is simple: Browse Products: Start by exploring Temu’s wide range of items. Add Items to Cart: Once you find what you want, add it to your shopping cart. Enter Coupon Code: At checkout, enter the coupon code [ACU934948] in the designated field and click "Apply." Complete Your Purchase: Review your discounted total before finalizing your order. Tips for Maximizing Your Savings Stacking Discounts: While you cannot apply multiple codes in one transaction, ensure you're using the most beneficial promo available. Lightning Deals: Keep an eye out for limited-time "Lightning Deals" that can offer discounts of up to 80%. Free Shipping Offers: Enjoy free standard shipping on all orders, adding even more value to your shopping experience. Conclusion With its competitive pricing and generous promotional offers like the $100 off coupon code [ACU934948], Temu stands out as a premier choice for savvy shoppers seeking great deals. Whether you're a new user eager to explore or an existing customer ready to reap rewards, Temu provides ample opportunities for significant savings on your purchases. Don’t miss out—redeem your coupons today and enjoy an exceptional shopping experience filled with incredible value!
Last updated: 2024-10-26

Post by mogam on Internal error:System.NullReferenceException: The object reference was not set to an object instance. ^{CODESYS Forge} ^talk ^(Post)
Hi everyone, I have a my App that reads values from a shared memory than 2 variables x,y were calculated. here as you can see in my code: PROGRAM PLC_PRG VAR szName : STRING := '/SM'; ( Name of the shared memory.) uxiSize : __UXINT := 646 * 2 * SIZEOF(REAL); ( Size of the shared memory. ) hShm : RTS_IEC_HANDLE; ( Handle to the shared memory ) pStart : POINTER TO REAL; ( Pointer to the first element in the memory ) pData : POINTER TO REAL; ( Pointer, which is incremented until the last sign in the memory is reached. ) shared_data :ARRAY[0..645, 0..1] OF REAL; velocity : ARRAY[0..2] OF REAL; ( Velocity array ) position : ARRAY[0..2] OF REAL; ( Position array ) angleDepth : ARRAY[0..645, 0..1] OF REAL; ( Angle and depth array ) xEndOfMemory : BOOL; x : ARRAY[0..645] OF REAL := 1.0; y : ARRAY[0..645] OF REAL := 1.0; (* Result of actions at the memory. *) OpenResult : RTS_IEC_RESULT; ReadResult : RTS_IEC_RESULT; PointerResult : RTS_IEC_RESULT; DeleteResult : RTS_IEC_RESULT; CloseResult : RTS_IEC_RESULT; i : INT; END_VAR ( Open the shared memory ) hShm := SysSharedMemoryOpen2(szName, 0, ADR(uxiSize), ADR(OpenResult)); IF hShm <> RTS_INVALID_HANDLE THEN (* Read the entire shared memory table *) SysSharedMemoryRead(hShm:= hShm, ulOffset:= 0, pbyData:= ADR(shared_data), ulSize:= uxiSize, pResult:= ADR(ReadResult)); (* Fetch the pointer from the shared memory. The pointer is pointing to the first element address *) //pStart := SysSharedMemoryGetPointer(hShm, ADR(PointerResult)); (* Close the shared memory *) //CloseResult := SysSharedMemoryClose(hShm := hShm); (* Read velocity and position data from the shared memory *) FOR i := 0 TO 2 DO velocity[i] := shared_data[i, 0]; position[i] := shared_data[i, 1]; END_FOR; (* Read angle and depth data from the shared memory *) FOR i := 0 TO 645 DO angleDepth[i, 0] := shared_data[(i + 6), 0]; angleDepth[i, 1] := shared_data[(i + 6), 1]; END_FOR; FOR i := 0 TO 645 DO x[i] := angleDepth[i, 1]*COS(angleDepth[i, 0]); y[i] := angleDepth[i, 1]*SIN(angleDepth[i, 0]); END_FOR; END_IF For these values an XY-CHART needs to be done and when i create a visualisation and set the x data and y data when i try to compile, i recieve this error: ------ Übersetzungslauf gestartet: Applikation: Device.Read_App ------- Code typisieren ... [FEHLER] Internal error:System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt. bei _3S.CoDeSys.LanguageModelManager.LDateType.Accept(ITypeVisitor typvis) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IArrayType ) bei ..(_IPointerType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IPointerType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IPointerType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei ..(_ISignature , _IPreCompileContext ) bei ..( ) bei ..(String ) bei ..(String , IVariable[]& , ISignature[]& ) bei ..(String , IVariable[]& , ISignature[]& , IScope& ) bei ..visit(_IVariableExpression , AccessFlag ) bei ..(_IUserdefType ) bei ..(_IVariable , IScope5 , _ICompileContext , _ISignature ) bei ..(_ISignature , IScope5 , _ICompileContext ) bei _3S.CoDeSys.Compiler35140.Compiler.(_ICompileContext , _IPreCompileContext , _ICompileContext , IProgressCallback ) bei _3S.CoDeSys.Compiler35140.Compiler.(_ICompileContext , Boolean , Boolean , _IPreCompileContext , _IPreCompileContext , _ICompileContext , Boolean , Boolean& , IProgressCallback ) bei _3S.CoDeSys.Compiler35140.Compiler.(Guid , Boolean , Boolean , Boolean , Boolean& , _ICompileContext& , _ICompileContext& , IProgressCallback , Boolean , Boolean ) Kompilierung abgeschlossen -- 1 Fehler, 0 Warnungen Übersetzung abgeschlossen -- 1 Fehler, 0 Warnungen : Kein Download möglich!
Last updated: 2024-05-24

Post by francesco86 on Script python for write in a file Project information ^{CODESYS Forge} ^talk ^(Post)
Dear all, My python script can read a Codesys project and save in file the different POU, but the problem is that I don't able to read the project info from the obj list. Following of this message there is my python script. Can you help my? Best regards Francesco # encoding:utf-8 # We enable the new python 3 print syntax from __future__ import print_function import os import shutil import time import sys from datetime import datetime print("--- Saving files in the project: ---") print("sys.argv: ", len(sys.argv), " elements:") for arg in sys.argv: print(" - ", arg) if (len(sys.argv)>1): folderExportName = sys.argv[1] print(" folderExportName: ", folderExportName) exportPath = sys.argv[2]+ sys.argv[3]+ "\\"+ sys.argv[1] print(" File path: ", exportPath) # git has_repo=False #save_folder=r'E:\Tmp\ControlPlugins\ControlPlugins\Export' save_folder = exportPath if not os.path.exists(save_folder): os.makedirs(save_folder) else: a=os.listdir(save_folder) for f in a: if not f.startswith("."): sub_path= os.path.join(save_folder,f) if os.path.isdir(sub_path): shutil.rmtree(sub_path) else: os.remove(sub_path) elif f==".git": has_repo=True info={} type_dist={ '792f2eb6-721e-4e64-ba20-bc98351056db':'pm', #property method '2db5746d-d284-4425-9f7f-2663a34b0ebc':'dut', #dut 'adb5cb65-8e1d-4a00-b70a-375ea27582f3':'lib', #lib manager 'f89f7675-27f1-46b3-8abb-b7da8e774ffd':'m', #method no ret '8ac092e5-3128-4e26-9e7e-11016c6684f2':'act', #action '6f9dac99-8de1-4efc-8465-68ac443b7d08':'pou', #pou '6654496c-404d-479a-aad2-8551054e5f1e':'itf', #interface '738bea1e-99bb-4f04-90bb-a7a567e74e3a':'', #folder 'ffbfa93a-b94d-45fc-a329-229860183b1d':'gvl', #global var '5a3b8626-d3e9-4f37-98b5-66420063d91e':'prop', #property '2bef0454-1bd3-412a-ac2c-af0f31dbc40f':'tl', #textlist '63784cbb-9ba0-45e6-9d69-babf3f040511':'gtl', #global textlist '225bfe47-7336-4dbc-9419-4105a7c831fa':'dev', #device 'ae1de277-a207-4a28-9efb-456c06bd52f3':'tc', #task configuration 'f8a58466-d7f6-439f-bbb8-d4600e41d099':'m', #method with ret '261bd6e6-249c-4232-bb6f-84c2fbeef430':'gvl', #gvl_Persistent '98a2708a-9b18-4f31-82ed-a1465b24fa2d':'task', #task '085afe48-c5d8-4ea5-ab0d-b35701fa6009':'progInfo'#project information }; def save(text,path,name,tp): if not tp: tp='' else: tp='.'+tp+'.txt' with open(os.path.join(path,name+tp),'w') as f: f.write(text.encode('utf-8')) def print_tree(treeobj, depth, path): global info #record current Path curpath=path isfolder=False t='' #text tp='' #type # get object name name = treeobj.get_name(False) id = treeobj.type.ToString() if id in type_dist: tp = type_dist[treeobj.type.ToString()] #Print all type of objects #print("--Name: ", tp) else: info[id]=name if treeobj.is_device: deviceid = treeobj.get_device_identification() t = 'type='+str(deviceid.type) +'\nid=' +str(deviceid.id) + '\nver='+ str(deviceid.version) if tp == "progInfo": print("-- There is prog info, ", tp) print("-- It has textual declaration: , ", treeobj.has_textual_declaration) print("-- It has textual implementation: , ", treeobj.has_textual_implementation) print("-- It is folder: , ", treeobj.is_folder) print("-- It is children: , ", treeobj.get_children(False)) print("-- It is children len: , ", len(treeobj.get_children(False))) print("-- It is progInfo type: , ", type(treeobj.ScriptProject)) #for child in treeobj.get_children(False): # print_tree(child, depth+1,curpath) try: if treeobj.is_folder : #system.ui.prompt('folder:'+u, PromptChoice.YesNo, PromptResult.Yes) isfolder=true pass except: pass if treeobj.has_textual_declaration : t=t+'(*#-#-#-#-#-#-#-#-#-#---Declaration---#-#-#-#-#-#-#-#-#-#-#-#-#*)\r\n' a=treeobj.textual_declaration t=t+a.text if treeobj.has_textual_implementation: t=t+'(*#-#-#-#-#-#-#-#-#-#---Implementation---#-#-#-#-#-#-#-#-#-#-#-#-#*)\r\n' a=treeobj.textual_implementation t=t+a.text if treeobj.has_textual_declaration and not treeobj.has_textual_implementation: t=t+'(*#-#-#-#-#-#-#-#-#-#---NOT Implementation visible---#-#-#-#-#-#-#-#-#-#-#-#-#*)\r\n' if treeobj.is_task : exports=[treeobj] projects.primary.export_native(exports,os.path.join(curpath,name+'.task')) if treeobj.is_libman: exports=[treeobj] projects.primary.export_native(exports,os.path.join(curpath,name+'.lib')) if treeobj.is_textlist: treeobj.export(os.path.join(curpath,name+'.tl')) children = treeobj.get_children(False) if children or isfolder: if tp: curpath=os.path.join(curpath,name+'.'+tp) else: curpath=os.path.join(curpath,name) if not os.path.exists(curpath): os.makedirs(curpath) if t: save(t,curpath,name,tp) for child in treeobj.get_children(False): print_tree(child, depth+1,curpath) for obj in projects.primary.get_children(): print_tree(obj,0,save_folder) with open(os.path.join(save_folder,'ExportInfo.txt'),'w') as f: now = datetime.now() infTimeExecution = now.strftime("%Y-%m-%d %H:%M:%S") f.write("Export date and time: "+infTimeExecution + "\r\n" + str(info)) print("--- Script finished. ---") #system.ui.info('save ok') projects.primary.close()
Last updated: 2024-04-30

Post by alex-at-xana on EThercat Dynamic configuration ^{CODESYS Forge} ^talk ^(Post)
Hi Everyone, For a fast monitoring system I am using Ethercat oversampling and timestamping inputs. As the customers has a lot of different configurations out in the field, we went for a dynamic Ethercat configuration. Already got the whole detection chain working but now I am stuck since two days in debugging the configuration. Here are my quesitons: I extended the dynamic config example for the EL3632 16#0E303052: //EL3632 pSlave^.SetDCSettings(TRUE,TRUE,80,80,TRUE,4000,0,0); pSlave^.AddSyncManager(16#1000,128,16#26,TRUE,3); pSlave^.AddSyncManager(16#1080,128,16#22,TRUE,2); pSlave^.AddSyncManager(16#1100,0,16#4,TRUE,1); pSlave^.AddSyncManager(16#1110,214,16#20,TRUE,0); pSlave^.AddFMMU(0,214,0,7,16#1110,0,1,1); pSlave^.AddFMMU(0,1,0,0,16#80D,0,1,1); xKnown := TRUE; This leads to a PLL Error for these devices. I double and triple checked the configuraton, but cannot find the issue. There seems to be one difference: the config dialog creates a startup parameter: 16#10F3:16#05, Name: Command_0, Value:0. Bitlen: 16, Stop on fault: false, jumpt at fault: false: next line: 0 a) I do not find information on how to set this in my code. Can you help me there? b) Without trying to set the value, I get a PLL error for these devices in the master log. Is the config wrong? c) Do I need to set the Master to Autoconfigure or Manual? I used autoconfigure for my tests. The stack creates input data addresses for the slaves input data range (pSlaves[i].InputData) which are different from those created when I use the Engineering tools dialogs to configure Ethercat. Specifically, the addresses seem to be aligned at 16 byte boundaries when they are created using the engineering tool, but may appear at uneven addresses when I use the script in dynamic config. I did not try to access ULINT at uneven addresses yet, but I am suspecting this may be a problem. Do I need to manually align the addresses ? Any help is appreciated...
Last updated: 2024-09-10

Post by george32 on CSV file and string manipulation. ^{CODESYS Forge} ^talk ^(Post)
Dear folks, I think I have a rather simple question but I could not find the right answer to my question: I have made with Excel a CSV file where I would like to have some general data regarding my program variables. I have made an program what let me read the file. The string I am currently get is at follows: 'ï»¿IP_Adres;192.168.45.12$R$NPort_number;2000$R$NCycle_time;43$R$NStart_Standard_IO;20$R$N' Now I want to split the string in multiple part, which I later would connect to the right variable. By Google and experimenting I have reached to the following code for the first part of the splitting proces: // Splitting the BOM of the string: Received_string := FileReadString; IF LEFT(STR:=New_string,3)= 'ï»¿' THEN Received_string_without_BOM :=RIGHT(STR:= Received_string,SIZE:= (LEN(STR:= Received_string))-3); END_IF //Splitting the remaining string in part for later declaration. WHILE index = 0 DO index_split_part := FIND(STR1:= Received_string_without_BOM,STR2:= '$R$N'); Part_of_String[index]:=LEFT(STR:=Received_string_without_BOM, SIZE:= index_split_part); index := index + 1; END_WHILE However in the splitting proces I could not understand what is really happening. I understand that the Find() function returns the first value the $R$N in the Received_string_without_BOM. This would mean that the index_split_part := 23 I|P| _ |A |d|r|e|s|;|1_|9 |2 |. |1 |6 |8 |. |4 |5 |. |1 |2 |$ |R |$ |N |P | 1|2| 3 |4 |5|6|7|0|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24|25|26|27| So the next part is to read the first 23 characters of the Received_string_without_BOM with the LEFT() function. I expected that the outcome the following was: 'IP_Adres;192.168.45.12$'. However the outcome is: 'IP_Adres;192.168.45.12$R'. I do not understand where the R after the $ sign comes from, because its place is 24 so it would not be added to the part_of the_string[index]. If I hard coded value 24 for the size it gives me the following return: 'IP_Adres;192.168.45.12$R$N'. I would expect everything till the R but the code adds the $N also to the string. I hope someone could explain to my what I am seeing wrong in my point of view? With kind regards, George
Last updated: 2024-09-27

Post by davidbo on Clean old license into an image SD ^{CODESYS Forge} ^talk ^(Post)
That might not be enough using CODESYS V3.5 SP20 and CODESYS Control for Raspberry Pi MC SL version: 4.11 I deleted .cmact_license directory. I installed new license and the dialog box said it was done successfully, but in reality it was not. What more should be deleted 5:/var/opt/codesys$ ls -la total 1948 drwxr-xr-x 10 root root 4096 Nov 17 12:29 . drwxr-xr-x 5 root root 4096 Jul 30 2020 .. -rw-r--r-- 1 root root 100014 Nov 17 12:08 .Audit_0.log -rw-r--r-- 1 root root 100040 Nov 17 11:30 .Audit_1.log -rw-r--r-- 1 root root 100062 Nov 17 09:18 .Audit_2.log -rw-r--r-- 1 root root 66260 Nov 17 12:36 .Audit.log drwxr-xr-x 2 root root 4096 Mar 30 2020 backup -rw-r--r-- 1 root root 2640 Feb 22 2024 bacstac.ini drwxr-xr-x 4 root root 4096 Mar 30 2020 cert drwxr-xr-x 2 root root 4096 Nov 17 12:29 .cmact_licenses drwxr-xr-x 2 root root 4096 Mar 30 2020 _cnc -rw-r--r-- 1 root root 1000088 Nov 17 08:35 codesyscontrol_0.log -rw-r--r-- 1 root root 422521 Nov 17 12:30 codesyscontrol.log -rw-r--r-- 1 root root 355 Nov 17 12:29 .GroupDatabase.csv -rw-r--r-- 1 root root 355 Nov 17 12:19 .GroupDatabase.csv_ drwxr-xr-x 3 root root 4096 Nov 17 11:16 OPCUAServer drwxr-xr-x 6 root root 4096 Mar 30 2020 .pki drwxr-xr-x 9 root root 4096 Nov 17 11:16 PlcLogic -rwxr-xr-x 1 root root 156 Mar 30 2020 rts_set_baud.sh -rw-r--r-- 1 root root 20736 Feb 22 2024 .SoftContainer_CmEmbedded.wbb -rw-r--r-- 1 root root 12445 Nov 17 09:06 SysFileMap.cfg -rw-r--r-- 1 root root 1983 Feb 22 2024 .UFC_SoftContainer_CmEmbedded.WibuC mLif -rw-r--r-- 1 root root 646 Nov 17 09:51 .UserDatabase.csv -rw-r--r-- 1 root root 646 Nov 17 09:51 .UserDatabase.csv_ -rw-r--r-- 1 root root 17305 Nov 17 12:29 .UserMgmtRightsDB.csv drwxr-xr-x 2 root root 4096 Mar 30 2020 visu -rw-r--r-- 1 root root 32684 Feb 8 2023 WibuCtxt.ctx
Last updated: 2025-11-17

Post by couponsah on كود خصم لبيه 50 رمز : (MA250) تخفيض قوي ^{CODESYS Forge} ^talk ^(Post)
كود خصم لبيه 50 رمز : (MA250) تخفيض قوي ## كود خصم لبيه 50 رمز : (MA250) تخفيض 15% أكبر كود خصم لبيه 50 اليوم لعام 2024 هو “MA250” والذي يمنحك خصم يصل إلى 60% على جميع المنتجات عند تطبيق الكود قبل إتمام عملية الدفع في متجر لبيه. كود خصم لبيه 50 رمز (MA250) 👗 احصلي على خصم 20% من لبيه مع رمز MA250 👗 . لبيه هى الحل المتكامل لتقديم خدمات الرعاية النفسية أونلاين، عبر الجلسات والمحاضرات من المختصين بكل سهولة وسرية من خلال منصة لبيه. كوبونات لبيه توفر لبيه مجموعة من أكواد الخصم على خدماتها، والتي يمكن استخدامها للحصول على خصومات على الطلبات: كود خصم لبيه (MA250) يمنح خصمًا بنسبة 25% على جميع الطلبات. كود خصم لبيه 50 (MA250) يمنح خصمًا بقيمة 50 ريالًا سعوديًا على الطلبات التي تزيد عن 200 ريال سعودي. كود خصم تطبيق لبيه (MA250) يمنح خصمًا بنسبة 10% على الطلبات الأولى عند استخدام تطبيق لبيه. كود خصم لبيه تويتر (MA250) يمنح خصمًا بنسبة 15% على الطلبات التي تتم من خلال مشاركة تغريدة لبيه على تويتر. كود خصم لبيه ريما أم يوسف (MA250) يمنح خصمًا حصريًا للمتابعين ريما أم يوسف على Instagram. كود خصم لبيه اليوم الوطني (MA250) يمنح خصمًا خاصًا خلال اليوم الوطني للمملكة العربية السعودية. كود خصم لبيه 50 رمز : (MA250) تخفيض 15% هل تعاني من ضغوط الحياة اليومية؟ 😥 لبيه الحل الأمثل لك! لبيه هو المنصة الرائدة في تقديم خدمات الرعاية النفسية أونلاين في المملكة العربية السعودية. من خلال جلساتنا و محاضراتنا المباشرة مع مختصين معتمدين، نضمن لك السرية التامة في منصة سهلة الاستخدام. 👍 استمتع بخصم خاص بمناسبة انضمامك لنا! باستخدام كود خصم "MA250"، يمكنك الحصول على خصم 50% على جلسة الرعاية النفسية الأولى الخاصة بك. 🤑 ما تنتظر؟ انضم إلى لبيه اليوم واحصل على المساعدة التي تستحقها. دعنا نساعدك على العيش بصحة نفسية أفضل! 💪 جميع كوبونات متجر لبيه موقع كوبونات شهير يقدم عروض خصم متجر لبيه 🌐🛒 يُمكنك الآن الاستفادة من خصومات هائلة عند التسوّق من متجر لبيه عبر استخدام كوبونات الخصم المتوفرة على موقع كوبونات شهير. أهم كوبون خصم متوفر حاليًا: كوبون خصم (MA250) 🤑 يُوفر خصمًا بنسبة 10% من قيمة الطلبية الإجمالية. كيفية استخدام الكوبون: قم بزيارة متجر لبيه الإلكتروني واختر المنتجات التي ترغب في شرائها. انتقل إلى صفحة الخروج وأدخل رمز الكوبون (MA250) في حقل "كود الخصم". اضغط على "تطبيق" وستُطبق الخصم على طلبك تلقائيًا. شروط وأحكام استخدام الكوبون: الحد الأقصى للخصم هو 10% من قيمة الطلبية. لا يُمكن الجمع بين هذا الكوبون مع أي عروض أو خصومات أخرى. الكوبون صالح لفترة محدودة فقط. للحصول على أحدث كوبونات الخصم وعروض التخفيضات، يرجى زيارة موقع كوبونات الشهير بانتظام. 🛍️💰 معلومات عن متجر لبيه و كود خصم لبيه 50 لبيك: حلول رعاية نفسية شاملة عبر الإنترنت راحة وخصوصية: استمتع بمواعيد الرعاية النفسية الخاصة بك بسهولة وسرية تامة من خلال منصة لبيك المريحة. وداعًا للتنقلات المرهقة وأوقات الانتظار الطويلة! 🌐 جلسات الاستشارات: تواصل مع أفضل المتخصصين النفسيين المعتمدين لمناقشة مخاوفك، وإنشاء خطط العلاج المخصصة، والحصول على الدعم اللازم في أي وقت ومكان. 👷‍♀️👷‍♂️ المحاضرات التوعوية: حضر محاضرات تثقيفية مليئة بالمعلومات القيمة حول مواضيع الصحة العقلية، وشارك بصوتك في الجلسات الحوارية الجماعية. 📚💡 الوصول السريع للدعم: استفد من خدمة الخط الساخن التي تعمل على مدار الساعة طوال أيام الأسبوع للحصول على المساعدة الفورية والطوارئ. نحن هنا دائمًا للاصغاء إليك. 📞✨ لبيه: منصة الرعاية النفسية الشاملة 💆‍♀️💆‍♂️💻 نظرة عامة تُقدم منصة "لبيه" حلولاً متكاملة للرعاية النفسية عن بعد. توفر جلسات فردية ومحاضرات جماعية مع متخصصين مرخصين من خلال منصة افتراضية آمنة وسرية. العروض الجلسات الفردية: استشارات خاصة مع معالجين نفسيين وأخصائيين اجتماعيين مرخصين. المحاضرات الجماعية: ندوات عبر الإنترنت حول مجموعة واسعة من الموضوعات المتعلقة بالصحة النفسية، بما في ذلك: إدارة التوتر والقلق تحسين احترام الذات التعامل مع العلاقات التأقلم مع الحزن وفقدان الأحبة الموارد التعليمية: مقالات ومقاطع فيديو ودورات مصممة لدعم رحلة الصحة النفسية الخاصة بك. المميزات: الراحة: يمكنك الوصول إلى خدمات الرعاية النفسية من أي مكان في أي وقت. الخصوصية: تحافظ منصة "لبيه" على سرية معلوماتك الشخصية وجلساتك. الملاءمة: يمكنك حجز الجلسات وإدارتها عبر الإنترنت بسهولة. الأسعار المعقولة: تقدم "لبيه" خيارات تسعير مرنة لتناسب مختلف الميزانيات. ابدأ رحلة شفائك اليوم مع لبيه! لبيه: منصتك المتكاملة للرعاية النفسية عبر الإنترنت 👋 مرحبًا بك في لبيه، المنصة الرائدة للرعاية النفسية عبر الإنترنت التي تجعل الوصول إلى المساعدة أسهل من أي وقت مضى. خدماتنا نقدم في لبيه مجموعة شاملة من الخدمات لمساعدتك على تحسين صحتك العقلية، بما في ذلك: جلسات علاجية فردية عبر الفيديو مع معالجين مرخصين ومدربين جيدًا 👩‍⚕️👨‍⚕️ محاضرات تفاعلية عبر الإنترنت حول موضوعات الصحة العقلية الهامة 📚💻 مدونة غنية بالموارد والمقالات حول الرفاهية العقلية 📝 لماذا تختار لبيه؟ تتميز لبيه بمجموعة من المزايا تجعلها الخيار الأمثل لاحتياجاتك في مجال الرعاية النفسية: سهولة الوصول: يمكن الوصول إلى خدماتنا بسهولة من أي مكان وفي أي وقت 🌎 السرية: نضمن السرية التامة لجميع بياناتك الشخصية 🔒 الجودة: يعمل معنا فقط معالجين مرخصين وذوي خبرة في مختلف مجالات الصحة العقلية 🧠 الأسعار المعقولة: نقدم مجموعة متنوعة من الخطط لتناسب جميع الميزانيات 💸 كيف تبدأ رحلتك ابدأ رحلتك نحو الصحة العقلية المثلى مع لبيه اليوم: قم بزيارة موقعنا الإلكتروني: [رابط الموقع الإلكتروني] حدد الموعد الذي يناسبك استمتع بتجربة رعاية نفسية لا مثيل لها! لا تتردد في التواصل معنا إذا كانت لديك أي أسئلة أو احتياجات خاصة. فريقنا هنا لمساعدتك في كل خطوة على الطريق. لبيه #الرعاية_النفسية_عبر_الإنترنت #الصحة_العقلية #العلاج_نفسي #المحاضرات_التفاعلية طريقة استخدام كود خصم لبيه 50 طريقة استخدام كود خصم لبيه 🇱🇧 إليك طريقة سهلة خطوة بخطوة لاستخدام كود خصم في لبيه: 1️⃣ اختر كود الخصم الخاص بك: ازر موقع كوبونات (مثلاً كوبوناتو) لإيجاد أحدث أكواد خصم لبيه. نسخ الكود. 2️⃣ انتقل إلى موقع لبيه: انتقل إلى موقع لبيه (https://libyapp.com/). 3️⃣ حدد الخدمة التي تريدها: استعرض الخدمات على الموقع واختر الخدمة التي تناسب احتياجاتك (على سبيل المثال، جلسة استشارة أو محاضرة). 4️⃣ أدخل المعلومات الخاصة بك: املأ النموذج بالمعلومات الشخصية الخاصة بك واختر وقت الجلسة. 5️⃣ إدخال كود الخصم: في صفحة الدفع، ابحث عن حقل "كود الخصم". ألصق الكود الذي نسخته في الحقل. 6️⃣ تطبيق الخصم: انقر فوق "تطبيق" لرؤية الخصم يطبق على إجمالي طلبك. 7️⃣ إكمال الدفع: اكمل عملية الدفع باستخدام طريقة الدفع المفضلة لديك. ملاحظة: قد تخضع أكواد الخصم لشروط وأحكام معينة، مثل الحد الأدنى لقيمة الطلب أو تاريخ انتهاء الصلاحية. تحقق دائمًا من التفاصيل قبل استخدامها. اقسام متجر لبيه أقسام متجر "لبيه" يوفر متجر "لبيه" مجموعة شاملة من الخدمات لتلبية احتياجات الصحة النفسية للأفراد، وتشمل هذه الخدمات: جلسات رعاية نفسية اونلاين: جلسات فردية وجماعية مع معالجين نفسيين مرخصين. جلسات عبر مكالمات الفيديو أو الرسائل النصية أو الهاتف. 📞 مرونة في تحديد الجلسات بما يناسب جدولك الزمني. محاضرات عن الصحة النفسية: محاضرات مباشرة وعند الطلب من خبراء في مجال الصحة النفسية. مواضيع تغطي مجموعة واسعة من القضايا النفسية. فرصة لطرح الأسئلة والتفاعل مع الخبراء. 💡 خدمات أخرى: تقييمات الصحة النفسية عبر الإنترنت. موارد ودعم إضافي مثل مجموعات الدعم عبر الإنترنت. برامج توعوية ووقاية من الأمراض النفسية. فوائد استخدام خدمات "لبيه": الراحة والسرية: تقديم خدمات الرعاية النفسية من المنزل أو أي مكان مناسب. 🏠 مختصون مؤهلون: معالجون مرخصون وخ خبراء لديهم خبرة في مجموعة واسعة من القضايا النفسية. 👩‍⚕️ خدمات ميسورة التكلفة: مجموعة واسعة من الخدمات بأسعار في متناول الجميع. 💰 الوصول السريع: حجز الجلسات والوصول إلى الموارد بسهولة من خلال منصة "لبيه". 📱 أهم الاسئلة الشائعة حول كود خصم لبيه 50 أسئلة شائعة حول كود خصم لبيه 50 🧐 ما هو كود خصم لبيه 50؟ 💰 كود خصم يمكنك استخدامه للحصول على خصم 50% على خدمات لبيه عبر الإنترنت. كيف أحصل على كود خصم لبيه 50؟ 🤷‍♀️ يمكنك الحصول على الكود من خلال متابعة صفحات لبيه على مواقع التواصل الاجتماعي أو الاشتراك في القائمة البريدية الخاصة بهم. هل يمكنني استخدام كود خصم لبيه 50 أكثر من مرة؟ 🙅‍♀️ لا، يمكنك استخدام الكود مرة واحدة فقط. ما هي الخدمات التي يشملها كود خصم لبيه 50؟ 💻 يشمل الكود جميع خدمات لبيه عبر الإنترنت، بما في ذلك الجلسات والمحاضرات مع المختصين. كيف يمكنني استرداد كود خصم لبيه 50؟ Redeem عند تسجيل الدخول إلى حساب لبيه الخاص بك، أدخل الكود في حقل "كود الخصم" قبل إكمال عملية الدفع. متى ينتهي صلاحية كود خصم لبيه 50؟ 📅 تختلف مدة صلاحية الكود حسب الحملة الترويجية. يرجى التحقق من شروط وأحكام الحملة لمعرفة تاريخ انتهاء الصلاحية. لم يتم تطبيق كود خصم لبيه 50. ماذا أفعل؟ ⁉️ تأكد من إدخال الكود بشكل صحيح. تأكد من أن الكود لا يزال صالحًا. اتصل بخدمة عملاء لبيه للحصول على المساعدة. مميزات كود خصم لبيه 50 مميزات متجر لبيه 🤝 يوفر متجر لبيه مجموعة من الميزات الفريدة لعملائه، مما يجعله الخيار الأمثل لتلقي خدمات الرعاية النفسية عبر الإنترنت 😊: سهولة الوصول: 💻 يمكن للمستخدمين الوصول إلى الخدمات بسهولة من أي مكان وفي أي وقت، من خلال منصة لبيه المريحة. لا حاجة للسفر أو الانتظار لمواعيد شخصية. الخصوصية والسرية: 🔒 تُجرى جميع الجلسات والمحاضرات عبر الإنترنت، مما يضمن أعلى مستوى من الخصوصية والسرية للمستخدمين. بيانات المستخدمين محمية بموجب إجراءات أمنية صارمة. جودة عالية: 🎓 يقدم المتجر خدمات عالية الجودة من قبل متخصصين معتمدين ومختصين في مجال الصحة النفسية. تتضمن الخدمات جلسات فردية وجماعية، ومحاضرات وورش عمل تغطي مجموعة واسعة من الموضوعات المتعلقة بالصحة النفسية. مرونة: 📅 يوفر المتجر مرونة في مواعيد الجلسات، مع إمكانية اختيار وقت مناسب يناسب جدول المستخدمين. يمكن للمستخدمين أيضًا إلغاء الجلسات أو إعادة جدولتها بسهولة من خلال المنصة. تلبية الاحتياجات الفردية: 👤 يتم تخصيص خدمات المتجر لتلبية الاحتياجات الفردية لكل مستخدم. يقدم المتخصصون الدعم والإرشاد بناءً على أهداف ومخاوف المستخدمين الفريدة. توفير الوقت والتكلفة: ⏰💰 يوفر متجر لبيه على المستخدمين الوقت والتكلفة المرتبطة بالخدمات الشخصية التقليدية. يمكن للمستخدمين توفير الوقت والجهد من خلال الحصول على الدعم النفسي من راحة منازلهم. سياسة الإرجاع في متجر لبيه مرحبا بك في متجر لبيه، منصة الرعاية النفسية الشاملة التي توفر لك جلسات ومحاضرات من مختصين، بكل سهولة وسرية. نحن في لبيه ملتزمون بتقديم خدمات عالية الجودة تلبي احتياجاتك. ومع ذلك، فإننا نتفهم أن هناك ظروف قد تتطلب منك استرداد الأموال مقابل الخدمات التي اشتريتها. شروط الإرجاع يمكنك استرداد الأموال مقابل الجلسات والمحاضرات التي اشتريتها في غضون 14 يومًا من تاريخ الشراء. يجب أن تكون الخدمة التي ترغب في استرداد الأموال مقابلها غير مستخدمة ولم يتم الوصول إليها. يجب إرسال طلب الإرجاع عبر البريد الإلكتروني إلى support@liby.app. خطوات عملية الإرجاع اتبع الخطوات التالية لطلب الإرجاع: راسلنا عبر البريد الإلكتروني على support@liby.app. ارفق في الرسالة رقم الطلب واسم الدورة أو الجلسة التي ترغب في استرداد الأموال مقابلها. وضح سبب رغبتك في استرداد الأموال. معالجة طلب الإرجاع سنراجع طلب الإرجاع الخاص بك في غضون 48 ساعة. وإذا تمت الموافقة على طلبك، فسنقوم برد المبلغ إلى طريقة الدفع الأصلية الخاصة بك. ملاحظة: لا يمكن استرداد الأموال مقابل الاشتراكات المتكررة بمجرد معالجة الدفعة. لا يمكن استرداد الأموال مقابل الخدمات التي تم استخدامها أو الوصول إليها. نحن في لبيه ملتزمون بتوفير أفضل تجربة لك. إذا كانت لديك أي أسئلة بخصوص سياسة الإرجاع، فلا تتردد في الاتصال بنا على support@liby.app. كوبونات مشابهة لكود خصم لبيه 50 كود خصم ترينديول الكويت كود خصم ترينديول للطلبات اقل من ١٥٠ كود خصم نون فود السعودية اقوى كود خصم نون
Last updated: 2024-10-26

Post by captaincookie on increase default string length in queue ^{CODESYS Forge} ^talk ^(Post)
Hello, I'm using Codesys V3.5 SP18 Patch 4. In the ElementCollectionExample Project from Codesys, I test the SimpleQueueExample in a Control Win V3 x64 environment. I try to add a string of 95 characters length to a queue. The default length of strings is defined as 80 characters. In the initialization of a string variable, it is possible to increase the length by the definition of e.g. STRING(1000). But when I write the string defined like this to the queue, only 80 characters are written to it and the rest is missing. I think the default length is still set in the queue definition, so it is necessary to change this, isn't it? Is there any option to increase the default length of strings in the queue? Attached you can find the used project. Thanks in advance. If any information are missing or my description unclear please let me know.
Last updated: 2023-10-05

Post by open on How to create a stopwatch? ^{CODESYS Forge} ^talk ^(Post)
Hi @ph0010421, I tried the program the TimeTaken is calculated when stop is triggered. I want the TimeTaken to be continuously calculated and counting when a BOOL variable is true. I tried to program this way: Declaration: PROGRAM PLC_PRG VAR bStartStop: BOOL := FALSE; // Start/Stop button bReset: BOOL := FALSE; // Reset button bRunning: BOOL := FALSE; // Flag indicating whether the stopwatch is running tStartTime: TIME; // Variable to store the start time tElapsedTime: TIME; // Variable to store the elapsed time END_VAR Implementation: // Main program logic IF bReset THEN // Reset button pressed, reset the stopwatch bRunning := FALSE; tElapsedTime := T#0s; ELSIF bStartStop THEN // Start/Stop button pressed, toggle the running state IF bRunning THEN // Stop the stopwatch bRunning := FALSE; ELSE // Start the stopwatch bRunning := TRUE; tStartTime := tElapsedTime; END_IF; END_IF // Update the elapsed time when the stopwatch is running IF bRunning THEN tElapsedTime := tElapsedTime + T#1s; // Adjust the time increment as needed END_IF However counting of the seconds is not accurate. I tried changing the main task cycle time interval to 1000ms. The counting of seconds become slower. (see attached) Please help
Last updated: 2023-12-08

<< < 1 .. 182 183 184 185 186 > >> (Page 184 of 186)

Sort by relevance or date

Forums

Help

Search talk: library documentation and support

Forums

Help

Search talk: library documentation and support

Searching