Post by spiritcore on Server not adding PLC ^{CODESYS Forge talk (Post)}
I added new Gateway and I can see it connected. When I scan the server for PLC, it finds the PLC but when I click the Add To Server button, it shows "PLC was added." in the status. But I can't find the PLC in the list. I tried removing the gateway and re-configure everything again but it didn't solve. Any ideas?
Last updated: 2025-02-17

Post by clarenced on Multiple applications on one device sharing variables. ^{CODESYS Forge talk (Post)}
Sounds feasible, but how would I create this object so that both applications would use the same instance of it. If this did work, it's still not really the solution I am looking for as it would mean mapping every variable I want to use on the hmi through this object vs I was hopping all the GVL variables would be available.
Last updated: 2025-02-20

Post by smic on put the Port number 80808 in Instance Setting of Deploy Control SL ^{CODESYS Forge talk (Post)}
I am using CODESYS V3.5 SP20 Patch 5. I am trying to use the Webvisu function on a PLC running on Docker. When I enter the port value 8080:8080 in the Instance Setting in Deploy Control SL, it is not saved. Can you please help me?
Last updated: 2025-02-21

Post by somlioy on CODESYS Control for PFC100 SL Firmware upgrade ^{CODESYS Forge talk (Post)}
Hi We delivered a system with a PFC100 using the CODESYS Control for PFC100 SL runtime a few years back. The system has once been decommissioned and are now to be commissioned again. Back then, there were only single licenses for the runtime. Can I now upgrade the firmware and runtime without purchasing a new license?
Last updated: 2025-02-27

Post by smic on Virtual Control SL Profinet connection ^{CODESYS Forge talk (Post)}
Hi. I'm trying to connect Profinet device with Virtual Control for Linux SL. After adding devices, I couldn't find actual device by Scan Device? Do I missed something? VPLC container on Docker IP: 172.17.0.4 Subnet: 255.255.0.0 Gateway: 172.17.0.1 Profinet device: AL1100 io-link master (default setting) IP: 0.0.0.0 Subnet:0.0.0.0 Gateway:0.0.0.0
Last updated: 2025-02-28

Post by fabiodasilveira on PLC Shell commands via ST Code ^{CODESYS Forge talk (Post)}
Thank you, Bingo. I have added the instructions below to the CODESYSControl.cfg file, but they haven't changed anything. [SysSocket] Adapter.0.Name="ETH0" Adapter.0.EnableSetIpAndMask=1 Adapter.1.Name="ETH1" Adapter.1.EnableSetIpAndMask=1 Regarding your second suggestion, could you please expand a bit on that?
Last updated: 2025-03-03

Post by tvm on VisuFbFrameBase.SetInputPositionData: The element id for the input position cannot be determined ^{CODESYS Forge talk (Post)}
This came up again today, so I'll post the fix for future reference. Happens with Schneider Machine Expert 2.2 and M262 controllers. Add this bit of code to a program called from the visu task //disable "VisuFbFrameBase.SetInputPositionData" log messages, which fill up the logs IF VisuElems.Private_Visu_Globals.g_ValueChangedListenerManager.GetListenerCount() > 0 THEN VisuElems.Private_Visu_Globals.g_ValueChangedListenerManager.RemoveValueChangedListener(VisuElems.Private_Visu_Globals.g_ValueChangedListenerManager.listenerForOnValueChanged); END_IF
Last updated: 2025-03-06

Post by suyash on Version Control ^{CODESYS Forge talk (Post)}
Hello, I face issues opening old Codesys 3 program when I am having a newer version installed. Unfortunately since I was forced to format my laptop after an unexpected crash. I lost all the setup files of the older versions. Is there ant where I can download it from? BR, Suyash
Last updated: 2025-03-07

Post by timvh on Assignment Efficiency - Repetitive Assignment vs IF statement ^{CODESYS Forge talk (Post)}
You can consider using OR_ELSE: Coils[0] := Coils[0] OR_ELSE (Buttons[0] AND Sensors[0] > 6); https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_operator_or_else.html IF Coils[0] is TRUE, then the rest is not relevant anymore and doesn't have to be evaluated anymore. PS, there is also an AND_THEN https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_operator_and_then.html
Last updated: 2025-03-08

Post by yannickasselin on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
I have been running Codesys IDE in VirtualBox on a Linux Mint host for many many years without issues. I use it every day and it works great. I wouldn't mess around with wine. Would probably just be a waste of time. Codesys Go might be the future of PLC programming on Linux! Can't wait to test it.
Last updated: 2025-03-17

Post by timvh on library is not available ^{CODESYS Forge talk (Post)}
1) In the library manager of your project select "Download missing libraries". 2) In the library manager open the "Placeholders" dialog. In here find the Placeholder which is not referenced to a specific library yet. Click in this line on the Library column and select the latest version of this library.
Last updated: 2025-03-24

Post by mucleus on How do I fix ";Internal Error (x86-64): Invalid type size" error? ^{CODESYS Forge talk (Post)}
I opened the project file of version 3.5.19.7 in 3.5.21.0. I updated all the environment of the project to the latest and compiled it. When I compile it, I get an error ";Internal Error (x86-64): Invalid type size". How can I fix this error? I will wait for your help.
Last updated: 2025-04-15

Post by andrej on Creating, using an external Function. ^{CODESYS Forge talk (Post)}
Hello, many thanks for your reply. I checked the logs. It seems that dll is not loaded. However other dll such as the Webserver are loaded. Could you tell me what I need to do such that my dll is loaded. (Furthermore I changed the C-Function a bit. I used the M4.exe from the SDK.) Many thanks.
Last updated: 2025-04-23

Post by atone on Change IO-Link Device Interface connected to a Profinet-Slave at Runtime ^{CODESYS Forge talk (Post)}
OK, I figured out that I can simply define all the sensors as 16 bytes IN/OUT, even if they are not all used. EDIT: The negative effect is that each bit is taken into account as an I/O for the license, even if not used.
Last updated: 2025-04-28

Post by andrej on Creating, using an external Function. ^{CODESYS Forge talk (Post)}
One step closer Hello finally the SoftPlc starts to load the dll on start up, however it is not successfull. I create a new minimal example Lib_XMATH.dll. Could please give me a hint, why the dll is not succesully loaded yet. Inputs would be highly appreciated. Many thanks.
Last updated: 2025-04-30

Post by nano on Creating, using an external Function. ^{CODESYS Forge talk (Post)}
the Answer is easy, you don't reapecting the codesys-behaviour and pre-request on a dll/so like you like to create. codesys won't load it about the fact that the dll isn't registered in codesys. check this page for more informations: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_extension_extension_sdk.html
Last updated: 2025-05-14

Post by pafarrell on EtherCAT quick start for advanced programmers ^{CODESYS Forge talk (Post)}
It would be great if there was a thread that had some quick-start links for basic how-to. But one that advanced programmers can jump into. I found this video playlist by SoftMotion-Black, which was very, very helpful: https://www.youtube.com/playlist?list=PLkc8m2OD0r9xJyfTiCBb1vuU_d2yBhjZ_ This person has some other great vids like creating your own custom library, which is awesome for OEMS.
Last updated: 2025-05-14

Post by fionexyan on Codesys Installation Always Freeze when the installing is almost done ^{CODESYS Forge talk (Post)}
Hello Everyone , I have try in repeatedly with uninstall and reinstall the Codesys software and even turn-off the antivirus application before implement to reinstall the codesys ,but at the consequence the problem still same although go with such method, therefore is there any solution for this issue . Thank You .
Last updated: 2025-05-16

Post by chanmina on What is the CFC editor (page oriented) "Add page" keyboard shortcut? ^{CODESYS Forge talk (Post)}
Mouse dragging is not something I want to do. I'd like a shortcut on my keyboard. escape road Alright, I might be a little odd, but any chart editor needs a drawing tool, such as a mouse, trackball, pad, or anything similar.
Last updated: 2025-05-27

Post by soundboardw on Active vs Unacknowledged Alarm ^{CODESYS Forge talk (Post)}
Great goal! A single BOOL to detect any active alarm and another for unacknowledged ones is perfect. When unacknowledged, your buzzer and red light flash classic alert. Once acknowledged, keep the light solid. This mirrors soundboard logic: triggers activate sound buttons unblocked, meme soundboard effects, and free soundboard tools. Check trending sounds download at SoundBoardW.com!
Last updated: 2025-06-21

Post by arwie on Use MC_Home without enabling the drive for homing method 35 ^{CODESYS Forge talk (Post)}
This is a homing routine which is controlled by setting mode of operation and started by setting a bit in the control word. If MC_Home is not usable for this homing method then I need to implement the same functionality. But how?
Last updated: 2025-06-25

Post by davidbo on How do I stop/start logging in my code using AC_Datalog with composer ^{CODESYS Forge talk (Post)}
I have on my Pi successfully deployed an application to which with composer AC_Datalog is added. It starts logging automatically. I want a Visualization with a start/stop button controlling the logging. That must be easy. How do I do that?
Last updated: 7 days ago

Post by davidking on Error, visualisation property handling, VISU_USEPROPERTYINFO ^{CODESYS Forge talk (Post)}
Solution: Disable VISU_USEPROPERTYINFO define Go to Project → Options (or Project → Properties, depending on your CODESYS version). Find the section called Compiler Defines. Look for the define: nginx Copy Edit VISU_USEPROPERTYINFO Delete it from the list, or uncheck it if it’s a checkbox. Save your changes and try compiling the project again. → This is the right approach if you don’t need property handling for visualization elements.
Last updated: 5 days ago

Post by paulpotat on Where can I find a list of all available runtime configuration parameters ? ^{CODESYS Forge talk (Post)}
Hello, I was wondering if there is a list somewhere of all the parameters that can be used inside the "/etc/codesyscontrol/CODESYSControl_User.cfg" configuration file ? I searched the documentation but didn't find anything. If it doesn't exist, that would be nice to have a little bit more documentation about this file :) Thank you for your help, BR
Last updated: 3 days ago

Post by ryandmg on Web Client (HMI) Disconnects from Webvisu (Weidmuller u-OS) ^{CODESYS Forge talk (Post)}
Thanks So Much for the reply! Were using the Weidmuller UV66-ADV-10-CAP-W The HMI is pointed to the URL which is assigned through u-OS. Basically when you log into the controller's webserver via browser you can view the installed apps. One of which is the Codesys runtime. When you click on that it takes you to the visualization. That corresponding url is what the HMI is looking for. I apologize I don't have that on hand as I'm in the office right now. I don't think I tried connecting using the port you mentioned and https in lieu of the u_OS URL. I can certainly try. Out of the box the u-OS is set for HTTP. Since we're isolated I havent changed that yet. When this has happened while logged on via chrome on my laptop, simply refreshing brings the visualization right back. In the case of the HMI in kiosk mode, we power cycle the HMI to force a reconnect, log back in u-OS and the visualization is back.
Last updated: 2023-09-06

Sort by relevance or date