Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by tk096 on Soft Motion - PosControl External Encoder ^{CODESYS Forge talk (Post)}
Hi, there is an example for PosControl: https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_example_poscontrol.html
Last updated: 2025-06-12

Velocity is too low even though correct value is reported ^{CODESYS Forge talk (Thread)}
Velocity is too low even though correct value is reported
Last updated: 2025-06-12

Soft Motion - PosControl External Encoder ^{CODESYS Forge talk (Thread)}
Soft Motion - PosControl External Encoder
Last updated: 2025-06-12

Post by tk096 on Velocity is too low even though correct value is reported ^{CODESYS Forge talk (Post)}
Hi, are you sure that you set up the scaling in the Scaling/Mapping tab correctly?
Last updated: 2025-06-12

Post by erick-n on Disable User Management ^{CODESYS Forge talk (Post)}
Hi Gima, did you find a solution for this issue?
Last updated: 2025-06-12

Post by viksym on How to get the motor scaling value from code ^{CODESYS Forge talk (Post)}
Is there a way to see what value is set as the "Work travel distance per motor rotation" that is set in the Scaling menu of the axis ? I am working on my own homing function block for sensorless (hardstop) homing and I want to make it be universal between different axes with different motor's scaling for distance per rev so I need to know this value from the axis itself. I know I could do it by just creating an input variable for the function block but I'm leaving that option as a last resort.
Last updated: 2025-06-12

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
check if the second onwire master is accessible in the configfile path setting. /etc/codesyscontrol/
Last updated: 2025-06-12

Post by eschwellinger on Disable User Management ^{CODESYS Forge talk (Post)}
..which plc in which version?
Last updated: 2025-06-12

Disable User Management ^{CODESYS Forge talk (Thread)}
Disable User Management
Last updated: 2025-06-12

(no subject) ^{CODESYS Forge talk (Thread)}
(no subject)
Last updated: 2025-06-12

Post by latassan on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
Hello, I'm trying to use a raspberryPi 5 as a PLC. I fixed its IP address, I can ping it. I've also installed the CODESYS Control for Raspberry Pi 64 SL runtime on it. So I've created a gateway (IP address of the Raspberry, TCP port 1217). I see the green dot next to this gateway. When I do a network scan, I can see my raspberry (see photo). When I try to connect to it, I have to define an administrator profile, which I do. On validation, I see a message: No device is responding to the scan request. I've checked that port 1217 is listening on the raspberry, I've uninstalled the runtime then installed it again, but I can't connect. Also, when I try to configure the user groups before connecting, I see that Offline mode is not supported by the device, even though I'm connected to it in the Deploy Control SL tab. When I try to refresh, I see: Gateway not configured properly. How can I connect to my Raspberry? Have I defined my gateway incorrectly?
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
After updating my Codesys to later versions, it seems my device repository no longer lists the proper runtime devices, nor ethernet adapters, or other previously installed device descriptions. What needs to be done here? Do I need to uninstall and do a clean install? I am now updating to SP21.1 to see if that fixes it. Any tips what I am doing wrong here are much appreciated. I don't see codesys control win, or have the ability to add an ethernet adapter in my project.
Last updated: 2025-06-12

Post by eschwellinger on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
Do you use the same type Raspberry PI64 SL in the device tree? Which version of the Pi package / Runtime do you use? 4.16.0.0?
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
For reference this is fixed by installing the new codesys install with a separate repository folder. Completely resolved. If anyone else sees this. I would like to know why the persistent devices repository folder does not properly retain between installs though.
Last updated: 2025-06-12

Missing Device Descriptions in Repository ^{CODESYS Forge talk (Thread)}
Missing Device Descriptions in Repository
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
For reference this is fixed by installing the new codesys install with a separate repository folder. Completely resolved. If anyone else sees this. I would like to know why the persistent devices repository folder does not properly retain between installs though.
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
For reference this is fixed by installing the new codesys install with a separate repository folder. Completely resolved. If anyone else sees this. I would like to know why the persistent devices repository folder does not properly retain between installs though.
Last updated: 2025-06-12

Post by tk096 on How to get the motor scaling value from code ^{CODESYS Forge talk (Post)}
Hi, unfortunately, in Softmotion you have only access to the combined fraction - the scaling factor from user units to motor increments. It can be accessed using MC_ReadParameter with parameter number 1054. increments = user_unit_position * fScaleFactor
Last updated: 2025-06-13

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
CODESYScontrol.cfg will be overwritten, CODESYSControl_Usr.cfg not.
Last updated: 2025-06-13

Post by s1mon on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
Thx for the hint. It works if I add following line to the .cfg file. PlaceholderFilePath.2=/sys/devices/w1_bus_master2, $OneWire2$ Is there a documentation how to modify this config file? Will this be overwritten if I do an update of the CodesysControl Runtime?
Last updated: 2025-06-13

Post by sbhaskarla on WebVisu File Transfer Error ^{CODESYS Forge talk (Post)}
I’m encountering an issue when downloading CSV files via the WebVisu button input config -> file-transfer option: • Custom directory: /plcdata/csv_logs/filename.csv o Error: Error 4 – Error during file transfer • Sandbox directory: /var/opt/codesys/PlcLogic/plcdata/csv_logs/filename.csv o Result: Download succeeds without error. Actions taken so far: 1. Added /plcdata/csv_logs to codesyscontrol.cfg (see attached). 2. Enabled file-transfer services in codesyscontrol_user.cfg (see attached). 3. Confirmed that the PLC writes CSV files correctly to /plcdata/csv_logs/. Despite these settings, WebVisu still returns Error when accessing the custom path 1. Using the placeholder file path '$$CSVLOGS$$/filename.csv' and it returns Error 6. 2. Using the literal path /plcdata/csv_logs/filename.csv and it returns Error 4 Could someone please help me determine what additional configuration or troubleshooting steps are required to serve files from /plcdata/csv_logs/? Please find screenshots attached for better understanding and I have also attached the config files
Last updated: 2025-06-13

WebVisu File Transfer Error ^{CODESYS Forge talk (Thread)}
WebVisu File Transfer Error
Last updated: 2025-06-13

Post by pauloricardoss on Codesys Control Raspberry PI 4.10.0 - missing 'Update Raspberry PI' option ^{CODESYS Forge talk (Post)}
I am having the same problem. 'Update Raspberry PI' disappeared from the 'Tools' menu. Using RaspberryPI 3B+, Codesys V3.5 Sp21 + RaspberryPI Package 4.16. I installed the package as Administrator, executed Codesys as Administrator I also tried to connect using the deploy (even with ssh and everything enabled on the RaspberryPi I received password denied). I used in the past the same equipment with Codesys V3.5 Sp18 and RaspberryPI Package 4.08, it was really easy. (I also did a brand new RaspbianOs installation to make sure that nothing affect the connection). Anyone, knows how to fix it? Thanks,
Last updated: 2025-06-13

Codesys Control Raspberry PI 4.10.0 - missing 'Update Raspberry PI' option ^{CODESYS Forge talk (Thread)}
Codesys Control Raspberry PI 4.10.0 - missing 'Update Raspberry PI' option
Last updated: 2025-06-14

Sort by relevance or date