Post by kareem-pt on Velocity is too low even though correct value is reported ^{CODESYS Forge talk (Post)}
Hello, I'm playing around with a single axis. I've setup scaling and set the drive to move 360 degrees in the commissioning tab. The axis does move 360 degrees, but it moves much slower than the 360 degrees per second that I set for the velocity. It seems to be about 3 times slower (taking about 3 seconds instead of 1). This is despite the set and actual velocity both being displayed as 360. The acceleration, deceleration and jerk are all set to very high values. I'm just running this on my PC, using demo mode (no license purchased yet). I've attached a video showing the problem. Does anyone know what the problem could be? Thanks
Last updated: 2025-06-06

Post by peterned on CNC - system goes to X=0 Y=0 before CNC file execution starts, how to avoid that? ^{CODESYS Forge talk (Post)}
Hi, I have a XY system and use a CNC file to move it. Everything works OK, except for the following: when CNC execution starts, the system rushes at high speed to (X=0, Y=0) point, and only then goes to the first line of the CNC file. If one of the axes is near 0, the system jumps and immediately stops with an error. In the CNC file settings (screenshot attached) I specified low default values for speed/acceleration and a start position different from 0,0 - but all that is ignored. Any idea how to avoid that move to 0,0 ? Thanks.
Last updated: 2024-04-26

Post by bbm1995 on Security Screen - Custom Certificates for OPC UA Server? ^{CODESYS Forge talk (Post)}
Hi everyone, is it possible to use selfsigned/created certificates (eg. with X - Certificate and Key Management) as a OPC UA Server certificate in the Security Screen? As far as I know I can only upload client certificates to the PLC and move it to "Trusted", "Untrusted" and "Quarantined". Same question is on sps-forum.de
Last updated: 2023-08-23

Post by tk096 on Motion FB Error ^{CODESYS Forge talk (Post)}
Hi, Softmotion Robotics does not support tracking in/out to dynamic coordinate systems with relative movements. Is MC_MoveLinearAbsolute an option? See SMC_RELATIVE_MOVEMENT_TRACKING_CS in https://content.helpme-codesys.com/en/libs/SM3_Error/Current/SM3_Error/SMC_ERROR.html Concerning the other error: Do you use any motion function blocks of SM3_Basic to move a single axis of the robot in your application?
Last updated: 2023-10-20

Post by gepert on parker servo and position ^{CODESYS Forge talk (Post)}
Hello, I using codesys motion with Parker servo (without brake). In my application i use mc_moverelative. When i send new position motor moves. But when it arrives to the point it stops and does not hold the position. It means that i can easily move shaft by hand Should i somewere turn it on so motor keep position by torque (current)? Best regards Lukasz
Last updated: 2024-08-04

Post by gepert on parker servo and position ^{CODESYS Forge talk (Post)}
Gentleman OMG, I made a huge mistake when i tried and moved shaft by hand i hold cover(as on photo) in my fingers. I was convinced that shaft has key but it there is not key. So when i turn cover it slide on shaft. When i take off cover and drive is in standstill, shaft does not move. So everything works perfectly
Last updated: 2024-08-07

Post by tk096 on gear over gear (2 masters,1 slave) - how to do it? ^{CODESYS Forge talk (Post)}
Hi, you could calculate the position/dynamics of the slave axis yourself and use one of the function blocks SMC_FollowPosition/SMC_FollowSetValues to move the slave axis. https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Movement/Direct/SMC_FollowPosition.html https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Movement/Direct/SMC_FollowSetValues.html
Last updated: 2024-08-19

Post by xabier on Kinematics Robot Delta 2 Axis ^{CODESYS Forge talk (Post)}
Hi, I have a customer and this customer design this robot...The customer need move ...I would like if Codesys has this Kinemtaics I attached photo of the robot.(this robot has 2 Axis) I have checked all kinematics has Codesys but not has the same....Someone help me Please?? Thanks XABI
Last updated: 2024-12-11

Post by jba-eltech on Moving Frames ^{CODESYS Forge talk (Post)}
Hello everyone. I am using Codesys and saw in a YouTube video on the Codesys channel (https://www.youtube.com/watch?v=y_l2siXY7dA) that you can create frames and move them with the mouse. However, the video does not show how to do this. Can someone please explain it to me? Thank you very much.
Last updated: 2025-04-01

Post by xabier on What wrong with FB SMC_Interpolator? ^{CODESYS Forge talk (Post)}
hi Getdone I have the same problem with you...Could resolved this problem?? Can you move with more speed??... I have cicle time 1 ms and the moment increase speed >5mm/s the FB SMC_Interpolator not fine work....Tell me plese if you resolved this problem Thanks Regards XABI
Last updated: 2024-04-30

Post by simotion on Inheritance of axis ^{CODESYS Forge talk (Post)}
I have developped a function block 'Axis' the inherits from 'AXIS_REF_SM3' -> FUNCTION_BLOCK Axis EXTENDS AXIS_REF_SM3 In my global variable list I define a variable MasterDrive of type Axis and assign Axis1. Axis1 is a virtual drive (AXIS_REF_VIRTUAL_SM3). This type should inherit from AXIS_REF_VIRTUAL. VAR_GLOBAL MasterDrive : Axis := Axis1; However I get the error 'Cannot convert type'. What is the way to obtain what I want : function block inheriting AXIS_REF_SM3 and initialising this function block with a Softmotion virtual or real axis?
Last updated: 2023-12-07

Post by andrebrandt on FB string and naming ^{CODESYS Forge talk (Post)}
Hi all. I have a FB written in ST. FUNCTION_BLOCK NTC10k VAR_INPUT Syst:STRING; In:REAL; END_VAR VAR_OUTPUT Out:REAL; OTag:STRING; Out_St:Struct_NTC10K; END_VAR VAR Tag:STRING; InstanceName: STRING; Structure:Struct_NTC10K; END_VAR What i'm trying to do, is to pass data to structure. In structure i want to add a tag with systemnumber and sensorname. '320.001-RT401' In pou i use this RT401: NTC10k;, and tried this RT401: NTC10k(Tag:='RT401'); Anyone done this?
Last updated: 2024-09-26

Post by andrebrandt on BACnet dynamic create bacnet object ^{CODESYS Forge talk (Post)}
Hi. I want to create a FB with bacnet objects. FUNCTION_BLOCK PT1000 VAR_INPUT System: STRING; In: REAL; Name:STRING; END_VAR VAR_OUTPUT Out: REAL; Out_St: Struct_PT1000; END_VAR VAR {attribute 'instance-path'} {attribute 'noinit'} Tag: STRING; Instance:DINT; //AnalogInn : WagoSysBACnet.FbAnalogInput_large(1); This works. Objectname is AnalogInn. identifier is 1 END_VAR I want to name object based on FB PT1000. In FB P1000, I want to write eUnits, Name and so on. How can i do this???
Last updated: 2025-01-15

Post by kishan on OSCAT Scale_r function not working in LD 4.60 works in LAD2 on 3.5.21sp3 ^{CODESYS Forge talk (Post)}
here is formula for scale function you can impliment your own scale function Output=OutMin+(Input−InMin)×(InMax−InMin)(OutMax−OutMin) FUNCTION_BLOCK FB_Scale VAR_INPUT xIn : REAL; // Input value (e.g., raw sensor) xInMin : REAL; // Input range minimum xInMax : REAL; // Input range maximum xOutMin : REAL; // Output range minimum xOutMax : REAL; // Output range maximum END_VAR VAR_OUTPUT xOut : REAL; // Scaled output END_VAR VAR xGain : REAL; xOffset : REAL; END_VAR // Implementation xGain := (xOutMax - xOutMin) / (xInMax - xInMin); xOffset := xOutMin - xGain * xInMin; xOut := xGain * xIn + xOffset;
Last updated: 2025-10-26

Post by davidbo on How to allow a user to handle certificates without access to sourcecode? ^{CODESYS Forge talk (Post)}
With CODESYS V3.5 it is possible for a user to do the following things among many others. 1) Handling certificates especially move a certificate to the trusted folder. 2) Change password and create new users for OPC UA access However it requires access to the whole projects and its source code. Something you might not want to hand over to an end user for a stand alone product. Is there a way out of this problem?
Last updated: 2023-11-06

Post by gepert on parker servo and position ^{CODESYS Forge talk (Post)}
Hello, Thank you for your response. In my application i use ethercat and while work i do not turn off power. After relative move motor is in standstill. As you suggest I suppose that problem is in drive setting but i do not see any option about increase standstill torque. Below i posted some photos from drive setting manager - PSD Servomanager Do you see any settings responsible for standstill torque? thank you
Last updated: 2024-08-05

Post by trusty-squire on implementing continuous movement in Codesys ^{CODESYS Forge talk (Post)}
What do you mean by continuous movement? You want to continuously follow a dynamic target position? SMC_ControlAxisByPos, which is typically used with CNC Interpolators, could work for that. Instead of feeding the target position in from the Interpolator, feed in the target position from your server instead. Once you enable the FB, it will continuously move the axis to track the fSetPosition input. https://content.helpme-codesys.com/en/libs/SM3_CNC/Current/SM_CNC_POUs/SoftMotion-CNC/Direct-Axis-Control/SMC_ControlAxisByPos.html
Last updated: 2024-09-12

Post by pmanuele on Beckhoff AS1060 and EL7041 configuration ^{CODESYS Forge talk (Post)}
Hello everyone, i'm having some problems commanding AS1060 step motor with EL7041 (rev22) drive. With motor i've also the incremental encoder (05.2420.1230.0200.5009). I can correctly move the motor in "Position controller" operating mode with the internal counter. The problems start when i set the Encoder in feedback type or i change the operating mode. Does anyone have experience with these two terminals and can give me some advice of main parameters to check or change? Thanks everyone
Last updated: 2024-12-11

Post by wayne-riesterer on Assignment Efficiency - Repetitive Assignment vs IF statement ^{CODESYS Forge talk (Post)}
Hello Can anyone see any problems with constant assignment as in the following statement: Coils[0] := Coils[0] OR (Buttons[0] AND Sensors[0] > 6); Rather than using the more verbose and vertically-larger: IF NOT Coils[0] AND Buttons[0] AND (Sensors[0] > 6) THEN Coils[0] := TRUE; END_IF Also, is the test expression short-circuited in the latter case? In other words, will the runtime move on after it sees Coils[0] = FALSE AND? Thanks
Last updated: 2025-03-07

Post by nz-dave on ethercat softmotion axis error ^{CODESYS Forge talk (Post)}
Hi all I'm having a little trouble get my axis to work. i can turn them off and on. i can run each servo manually inputting directly to the mapping address. as soon as i try to use any FB's like jog etc my servos wont move and error out. so far I've had error "SMC_ERROR.SMC_DI-POSITIONLAGERROR" and another one about not calling a fb. cheers. in the attachment I have just jogged X_Axis with the MC_JOG FB
Last updated: 2025-03-10

Post by aniket-b on Multiple function blocks are not executing at the same time in ladder logic ^{CODESYS Forge talk (Post)}
I have two ethernet Ip drives and created Function Blocks for different motions tasks. I am using same FB for both the drives. When I try to execute the relative move start command on FB for both the drives it is not working. However, if I add 1ms second delay between the execution of each drive it is working. Also when I change the rung order it is working for the first drive in the rung. what could be the wrong here?
Last updated: 2024-03-12

Post by food on Beaglebone Black OPC-UA Server ^{CODESYS Forge talk (Post)}
Man, this was a long time ago. I think the problem probably stemmed from not loading the certificates from the client and the server on the server and client respectively in the correct manner. I believe I ended up getting around it just by removing all security on the server. In the end we did not move forward with that architecture so I never had to actually fix it.
Last updated: 2024-04-10

Post by mizi on SM_Drive_Virtual ^{CODESYS Forge talk (Post)}
Hi I recently started learning Codesys SoftMotion. At first, I mainly used YouTube videos. I stopped at two videos where the same problem keeps recurring. fbReadPos( Axis := X_Axis, Enable := TRUE, Position => gAxes.lrActualPos); <- axis cannot move I checked the entire code line by line. Zero errors. GPT spits out nonsense, throwing up increasingly worse errors. And when I copy its code, it says the code is wrong and gets stuck in a loop of its own stupidity. Can anyone explain why it doesn't work? Link to the video below: https://www.youtube.com/watch?v=CYa2HvYZgbM&list=PLsEhEcYjG7na0OveU7cqFXBx7ATyGGn0A&index=3
Last updated: 2025-10-21

Post by ducng on SMC_FB_WASNT_CALLED_DURING_MOTION when enable MC_MoveRelative ^{CODESYS Forge talk (Post)}
Hello, I am using an Inovance PLC to control a servo via EtherCAT. When I enable MC_POWER, the drive switches to Run mode successfully. After that I call MC_MoveRelative, but I get the error SMC_FB_WASNT_CALLED_DURING_MOTION. The servo vibrates but the motor shaft does not move. I am new to EtherCAT/servo motion control, so I would appreciate any guidance or suggestions for troubleshooting this issue. Thank you in advance for your help.
Last updated: 2025-11-02

Post by k2saki on CNC / G01 Speed is very slow (or go-stop motion) in Continuous short segment . ^{CODESYS Forge talk (Post)}
I'm using CAD/CAM that outputs GCode with G01 many short segments from NURBS Curve, only X-Y axis. But CODESYS CNC motion seems much slower ( or stop-go motion ) in simulation mode than F-Value (I checked value from SMC_Interpolator - dVel ). In GCode G01, F value is F500, but movement is very slow, actual speed (dVel) is between 0 to 30 back and forth. I think very old CNC can move like that, but nowadays, a lot of CNC can move smoothly to process free curve ( somethimes option switch ) I tried to use G51 Dxx but I got the same result. My questions are 1) How do I improve CODESYS CNC motion in this case ? 2) How can I graph the sampling from dVel of SMC_Interpolate in CODESYS? From my GCode N2006 G01 X1.4364 Y-14.6847 F500 N2007 G01 X1.6759 Y-14.6768 N2008 G01 X1.9152 Y-14.6486 N2009 G01 X2.1547 Y-14.6400 N2010 G01 X2.3943 Y-14.6090 N2011 G01 X2.6336 Y-14.6002 N2012 G01 X2.8732 Y-14.5716 N2013 G01 X3.1127 Y-14.5634 N2014 G01 X3.3520 Y-14.5410 N2015 G01 X3.5915 Y-14.5336 N2016 G01 X3.8308 Y-14.5307 ... Thansk.
Last updated: 2024-04-29

Sort by relevance or date