Post by thysonfury on OPTO22 Groov Epic PR2 Modbus Comms Dropping out every 2 hours and 4 Mins ^{CODESYS Forge talk (Post)}
Hi after some assistance with an error on a Groov PR2 PLC. We have a few different communications set up as shown below: One Modbus TCP Slave Connection - ( Sending / Receiving Data from a PC ) Two Modbus TCP Master Connection - ( Reading Data from a UPS Panel and Reading Data Gas Chromatograph) One Modbus RTU Slave Connection 485 - (Reading Data from a fire and gas panel) One Modbus RTU Master Connection 485 - (Sending Data to a Telemetry Unit) All Licenses have been installed as per OPTO22 suggestions of the order below: Modbus TCP Master Modbus TCP Slave Modbus RTU Master Modbus RTU Slave When I check on License manager the RTU Master license seems to disappear on installing the RTU. (What ever reason I’ve been told this is “normal”). If I use Device License Read It will successfully read all the licenses correctly. Now the issue is every 2 hours and between 4. For what ever reason the communications seems to end and lock up for about 20 seconds. During this time even if I was logged into the PLC it would kick me off and I’d have to re type the password to enter. Most of the devices can handle this however the RTU flags up a communications failure at the SCADA and is raising alarms every 2 hours and 4 mins. We’ve had multiple people go through the code to check for anything obvious. Does anyone have any ideas?
Last updated: 2024-04-15

Post by danwoodlock on Rpi zero w lost license after 4.11 update ^{CODESYS Forge talk (Post)}
Just adding some info: Today I found this post: https://forge.codesys.com/forge/talk/Runtime/thread/264bd530d4/ followed the steps suggested started with a fresh install of raspbian lite, installed 4.11, and then attempted to import my license update file. I get this when I do: Any help is appreciated.
Last updated: 2024-04-15

Post by koehler on Codesys 3.5.12 Module not Found ^{CODESYS Forge talk (Post)}
Hi there, I am getting troubles with a project. In the Hardware configuration I got some Lenze drives 9400. One of them got as status " Module not Found". Connection are good. ID Node of the Canopen network is also good. I don't find any reason for this status, nor any options to check.
Last updated: 2024-04-17

Post by tomas111 on Black background when loading webvisu ^{CODESYS Forge talk (Post)}
Tell me, are there ways to remove the white background from the page loading? I want to change it to a black background. I think there are options with changing /home/codesys_root/PlcLogic/visu/webvisu.htm Perhaps you have already encountered a similar situation. I hope to find the answer to my question.
Last updated: 2024-04-17

Post by jw97ke on Example_PackML.project benötigt ^{CODESYS Forge talk (Post)}
Hallo gabrielmorte, bei der Installation von dem CODESYS OMAC PackML State Machine Package aus dem CODESYS Store, wird eine Projektdatei in ein benutzerdefiniertes lokales Verzeichnis gelegt. Außerdem werden 2 zusätzliche PDF Dateien abgelegt, welche das Projekt beschreiben, so wie das Projekt auch in der Online Hilfe beschrieben wird. https://content.helpme-codesys.com/en/CODESYS%20Examples/_ex_cds_omac_state_machine.html Viele Grüße
Last updated: 2024-04-23

Post by dhumphries on Rounding error in simple addition ^{CODESYS Forge talk (Post)}
I have discovered a rounding error, either in Codesys or in my understanding of numbers. The attached ladder shows that when the up button is pressed the number increases by 0.1, when the down button is pressed number decreases by 0.1, after several button presses the number isn't equally divisible by 0.1. Have I discovered a bug or am I doing something wrong?
Last updated: 2024-04-27

Post by k2saki on CNC / G01 Speed is very slow (or go-stop motion) in Continuous short segment . ^{CODESYS Forge talk (Post)}
Hi, gseidel. Thank you so much for your advice. I have created a program to preprocess G-code as follows 1.SMC_ReadNCFile2 2.SMC_Interpreter 3.SMC_CheckVelocities Then I put SMC_OUT_QUEUE in SMC_Interpolator. Where should I insert SMC_SmoothMerge and SMC_SmoothPath? Or are there any example link for it ?
Last updated: 2024-04-30

Post by xabier on What wrong with FB SMC_Interpolator? ^{CODESYS Forge talk (Post)}
hi Getdone I have the same problem with you...Could resolved this problem?? Can you move with more speed??... I have cicle time 1 ms and the moment increase speed >5mm/s the FB SMC_Interpolator not fine work....Tell me plese if you resolved this problem Thanks Regards XABI
Last updated: 2024-04-30

Post by paho on Linux runtime mit init-functions ^{CODESYS Forge talk (Post)}
Hallo, ich habe eine Frage zu den init-functions: kann man irgendwie verhindern, dass bei einer Installation der Runtime (normal Update per CODESYS Linux Dialog) die init-functions unter /opt/codesys/scripts/init-functions immer überschrieben werden? Dort habe ich einige CPU/IRQ Anweisungen die ausgeführt werden müssen, aber nach jedem Runtime Update ist die Datei wieder auf Werkseinstellung. Danke!
Last updated: 2024-04-30

Post by timvh on Codesys SVN ^{CODESYS Forge talk (Post)}
Minimum version is 3.5 SP19 Patch 3. See https://store.codesys.com/en/codesys-git.html But you could ask your PLC vendor if it is possible to program their PLC's which have Runtime version SP16 with development version 3.5 SP19 or higher (should normally be possible, but with Safety PLC's there could be some regulation limitations).
Last updated: 2024-05-01

Post by arslan on G Code Position Shifting ^{CODESYS Forge talk (Post)}
Dear friends, I have a issue that. I would like to give a zero offset of any axis in G-Code by G54 from PLC code as below demonstration. N000 G00 X0 Y0 Z0 N010 G54 (offset from PLC) N020 G01 X0 Y0 Z0 . . How to fix it! BR
Last updated: 2024-05-02

Post by andrej on Channel timeout CmpChannelMgr ^{CODESYS Forge talk (Post)}
Hello, I use Codesys RTE 3.5.16.5. If I connect to the PLC I often get the following message: (see printscreen) 1. Channel timeout CMpChannelMgr. 2. Closing connection CmpChannelMgr. Can you tell me, what the meaning of this is? What does the number 1250030,1220020 resp. c400:0a0a:015a:0301 refer to? I could find any information in the online help. Thanks a lot.
Last updated: 2024-05-08

Post by yannickasselin on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
A bit of work but maybe possible to make your own driver using "CODESYS Control SL Extension Package". Look at the "ExternalIoDrv" example. It is installed in "C:\Program Files\CODESYS 3.5.20.0\CODESYS\CODESYS Control SL Extension Package" when you install the "CODESYS Control for Linux SL".
Last updated: 2024-05-08

Post by timvh on Change the Opening Position of the Dialog using VU.FbOpenDialog ^{CODESYS Forge talk (Post)}
Probably best to call the FB continuously. So something like this could solve it: IF xOpenLatchSettingDialog THEN xOpenLatchSettingDialog := FALSE; fbOpenLatchSettingsDialog.xExecute := TRUE; END_IF IF fbOpenLatchSettingsDialog.xDone OR fbOpenLatchSettingsDialog.xError THEN fbOpenLatchSettingsDialog.xExecute := FALSE; END_IF TopLeftDialog.iX := 100; TopLeftDialog.iY := 23; fbOpenLatchSettingsDialog( itfClientFilter:= VU.Globals.OnlyTargetVisu, sDialogName:= 'visu_AlarmLatchSettings', xModal:= TRUE, pTopLeftPosition:= ADR(TopLeftDialog) );
Last updated: 2024-05-09

Post by stiller on OPC-UA ApplicationUri / ProductUri ^{CODESYS Forge talk (Post)}
Thank you for your answer! I'm not sure, but it seems this is not what I am looking for. I attached three pictures. The first one is from the Codesys IDE. I use an Information Model to generate an OPC-UA server. I connected via UA-Expert, and there I see the URIs I would like to change.
Last updated: 2024-05-10

Post by corriibme on JSON Utilities and SetArray ^{CODESYS Forge talk (Post)}
Hello @florian, Could you please help with how to set an array value? I've been trying to use the with the setKeyWithArray method which creates the key with an empty array value. But I have been unable to set items in this array? objindex:= fb_JBuilder.SetKeyWithArray("Key6", diParentIndex := diRootIndex); objindex2:= fb_JBuilder.SetValue(value:= iValue2, diParentIndex:= objindexx); //iValue: array[0..n] of int; Best regards
Last updated: 2024-05-11

Post by k2saki on How to define CONDITIONAL PRAGMA that effects all ST-POU in project. ^{CODESYS Forge talk (Post)}
I'd like to use same code/project in different devices. (RPi, PLC) I change some lines in some POU before compiling. (array size, file path, etc ) My question is How to define pragma that effects all ST-POU in project. Is it possible ? I've read this. https://help.codesys.com/api-content/2/codesys/3.5.12.0/en/_cds_pragma_conditional/
Last updated: 2024-05-12

Post by rajesh008 on i can't declear the address in GVL - codesys SP19 Patch5 ^{CODESYS Forge talk (Post)}
The “_AB AT %IW0:word; ” if i called the value then im getting this error. like below "the declartion of the variable with an address assignment cannot be used in a PRG or GVL with the attribute 'subsequent'" This is happening when the GVL is selected in Redundancy Configuration. if i un-select the address declaration is working fine
Last updated: 2024-05-13

Post by matthew on New Ladder Diagram conversion does not work due to missing features ^{CODESYS Forge talk (Post)}
Hi @eschwellinger Just wondering if there is any update when the Expression or part of it has no effect will be fixed? Also have the ability to open an FB when online and offline. It would also be great to be able to view the ST code block when online.
Last updated: 2024-05-14

Post by matthew on Persistence Manager Backup ^{CODESYS Forge talk (Post)}
Hi @eschwellinger yes I have been using xDoubleStorage It happened again and I checked and the files were still there with there contents, restarting codesys or rebooting would not even reload them. Doing a download and then starting the PLC loaded them and began working again. Some sort of mismatch error or something?
Last updated: 2024-05-14

Post by siscu on Raspberry Pi: List of available example applications ^{CODESYS Forge talk (Post)}
Could this be turned into a library? I'd love for a way to have the main program call a function block method using the program's I2C_master device. I assume I should be passing the master as a variable for the function block, but I don't see how that could be achieved
Last updated: 2024-05-15

Post by micik on CAA File- FILE_OPERATION_DENIED error ^{CODESYS Forge talk (Post)}
Hello, I'm trying to use FILE.Open to open file that exists in the given location. sFileName is formed from "Copy as path" in Windows. So I'm sure file exists and it is in the given location. And still, I get thiss denied error. What could be the problem here? Attached is a screenshot with current implementation.
Last updated: 2024-05-16

Post by xiaoyan on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Hello Well i need some basic advice. My protegoD drive is shown deactivated in the device tree. i can see its variables and other i/o in online mode but the device itself is deactivated. how can i address this issue. is there any configuration error.using ethercat link to connect to protegoD by Primo MC plc
Last updated: 2024-05-16

Post by mgengler on Recipe Manager - Not Creating Recipe Files ^{CODESYS Forge talk (Post)}
Thanks for info... However, I changed the directory to: C:\ProgramData\CODESYS\CODESYSControlWinV3x64\58719825\PlcLogic\Recipes It still displays the content of this folder OK, however still will not write or read files. Is this the PLCLogic area you speak of? I also tried adding this path the the CodesysControl.cfg file. But still can't get it to work. Any additional direction would be appreciated!
Last updated: 2024-05-20

Post by eschwellinger on Recipe Manager - Not Creating Recipe Files ^{CODESYS Forge talk (Post)}
With Linux SL and Windows Control Win - with this example https://forge.codesys.com/prj/codesys-example/recipe-manageme/home/Home/ We see in the PLClogic directory the generated recipe files see my screenshot. c:\ProgramData\CODESYS\CODESYSControlWinV3x64\XXXXXXXX\PlcLogic\Hello.RecipeDef.txtrecipe c:\ProgramData\CODESYS\CODESYSControlWinV3x64XXXXXXX\PlcLogic\ABC123.OtherRecipes.txtrecipe
Last updated: 2024-05-21

Sort by relevance or date