Post by yuan on Seeking a Code-Based Solution for EtherCAT Slave Dropout or Master Errors in Production (Beyond Software Hot Reset) ^{CODESYS Forge talk (Post)}
I need official assistance with the following issue: During EtherCAT communication, if a slave station drops off the network or the master station encounters an error, the problem can currently only be resolved by performing a software-based hot reset. In actual production environments, this approach is unacceptable. Is there a method to resolve these issues programmatically, through code?
Last updated: 2025-07-18

Post by imdatatas on The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Post)}
Dear @gseidel, @tk096, I noticed that with SoftMotion V4.18.0.0, if a new axis is added to the project, the ramp type selection defaults to "Quadratic". In all previous versions, the velocity ramp type selection was "Trapezoidal". This causes some unexpected issues in projects with SoftMotion version V4.18.0.0 for newly created or newly added axes to existing projects. Is it possible to reconsider this situation in the next update and set the velocity ramp type to "Trapezoid" by default again? Best Regards, Imdat
Last updated: 2025-07-22

Post by fschuler on Keine Verbindung zum Raspberry bei Runtime Installation ^{CODESYS Forge talk (Post)}
Hallo, Hi, Ich versuche die Codesys Runtime auf einer Raspberry PI 3B+ zu installieren. Immer wenn ich auf den Schalter installieren drücke kommt eine Fehlermeldung: Keine Verbindung zum Zielgerät: An established connection was aborted by the server. Raspberry 3B+ mit neustem raspberry PI OS. Codesys 3.5.15 Patch 1 Codesys Runtime Package 3.5.16.20 SSH ist aktiviert. I ich kann mich mit Putty einloggen Ping ist möglich IP Adresse suchen ist möglich Nur die Installation startet nicht
Last updated: 2025-07-23

Post by imdatatas on MC_MoveAbsolute: C0138: No matching 'FB_Init' method found for instantiation of SMC_MoveAbsRelPerformerImpl [ERROR] ^{CODESYS Forge talk (Post)}
Hello everyone, Updating and converting an existing working Codesys Softmotion axis control project to the latest Codesys IDE and Softmotion version always gives the following error message during compilation. " [ERROR] sm3_basic, 4.18.0.0 (codesys): MC_MoveAbsolute: C0138: No matching 'FB_Init' method found for instantiation of SMC_MoveAbsRelPerformerImpl " -- Previously working version: Codesys IDE SP18.50, Softmotion 4.10.0.0 -- Later updated version with the error: Codesys IDE SP21.10, Softmotion 4.18.0.0 Has anyone encountered a similar issue? How can this be resolved? Regards, Imdat
Last updated: 2025-07-24

Post by jampid on Codeys Ladder LD2 ^{CODESYS Forge talk (Post)}
Hi, Has anyone managed to use the last four buttons in a POU toolbar in LD2? You can close and open by clicking from one small rectangle to another (same for deleting a closure //). Linking K to D causes a series connection with all the branches // above. Amazing! I don't really see the advantages of this supposedly modern and efficient language over the old LD/FBD. Can anyone explain?
Last updated: 2025-07-24

Post by ivan-g on MODBUS ^{CODESYS Forge talk (Post)}
Hi There, I took over a project from a colleague (in GTB) who left the company. When I took over his project, it wouldn't compile because some libraries were missing. I managed to recover quite a few libraries, but I can't find the library that contains the block functions shown in the image. Here are a few examples: Fb_RegMel_ISO Fb_DefModbus FbDecalConsSalSO Fb_Autor_FreeCool_CTA_C I'm a little stuck at the moment, so if you see a Facebook post that speaks to you, don't hesitate to get in touch! Thank you in advance for your help.
Last updated: 2025-08-05

Post by ivan-g on MODBUS ^{CODESYS Forge talk (Post)}
Hi There, I took over a project from a colleague (in GTB) who left the company. When I took over his project, it wouldn't compile because some libraries were missing. I managed to recover quite a few libraries, but I can't find the library that contains the block functions shown in the image. Here are a few examples: Fb_RegMel_ISO Fb_DefModbus FbDecalConsSalSO Fb_Autor_FreeCool_CTA_C I'm a little stuck at the moment, so if you see a FB that speaks to you, don't hesitate to get in touch! Thank you in advance for your help.
Last updated: 2025-08-05

Post by eschwellinger on Changed Device of Rapberry Pi to MC SL instead of standard SL and cannot connect anymore ^{CODESYS Forge talk (Post)}
1) https://store.codesys.com/en/codesys-control-for-raspberry-pi-sl.html -> SL: Restrictions The combination of Raspberry Pi and a CODESYS Runtime is for private use, test and teaching purposes. Commercial use is not permitted. 2) you could switch between them by /etc/codesyscontrol/CODESYSControl_User.cfg [CmpRasPi] Architecture=armv7l for MC: armv7l for SC: armv6l for 64Bit: aarch64 or in the Deploytool:
Last updated: 2025-08-06

Post by gepert on GearInPos ^{CODESYS Forge talk (Post)}
Hello, Please give any tips regarding stopping Mc_GearInPos block. Please look at attached drawings. When fb MC_GearInPos is started, output "busy" is true - it is ok. But when i want to stop this funkction blok i deactive execute input and i use Mc_stop. Unfortunelly Mc_gearInPos is still busy. It lasts till to synchronize phase. Then i can stop it by Mc_stop. So I cannot stop fb before synchrnization. Can you give any tips how solve this problem. Sometimes I must to switch off before synchro. Best regards Lukasz
Last updated: 2025-08-07

Post by phryniszak on RPI CANFD ^{CODESYS Forge talk (Post)}
Hi, I have rpi with CANFD MCP2518FD. Classic can communication is working OK but when I try open in CANFD hDriver := CL2.FdDriverOpenH(usiNetId := 0, uiNominalBaudrate := 500, uiDataBaudrate := 0, xSupport29Bits := FALSE, ctMessages := 100, peError := ADR(eError) error is returned with value 10226 which is not documented (https://content.helpme-codesys.com/en/libs/CAA%20Can%20Low%20Level%20Extern/Current/CAN-Low-Level/Enums/ERROR.html#error) CAA CanL2 is 3.5.21 version. Question is: 1. Is anyone get CANFD working? 2. What is meaning of this value (10226)? Regards, Pawel
Last updated: 2025-08-09

Post by phryniszak on RPI CANFD ^{CODESYS Forge talk (Post)}
Hi, I have rpi with CANFD MCP2518FD. Classic can communication is working OK but when I try open in CANFD hDriver := CL2.FdDriverOpenH(usiNetId := 0, uiNominalBaudrate := 500, uiDataBaudrate := 0, xSupport29Bits := FALSE, ctMessages := 100, peError := ADR(eError) error is returned with value 10226 which is not documented (https://content.helpme-codesys.com/en/libs/CAA%20Can%20Low%20Level%20Extern/Current/CAN-Low-Level/Enums/ERROR.html#error) CAA CanL2 is 3.5.21 version. Question is: 1. Is anyone get CANFD working? 2. What is meaning of this value (10226)? Regards, Pawel
Last updated: 2025-08-09

Post by yannickasselin on Dynamically enabling/disabling Modbus slave devices in runtime (performance issue with timeouts) ^{CODESYS Forge talk (Post)}
I would definitely try using the "Reconfigure" function block from "CAA Device Diagnosis@ library. https://content.helpme-codesys.com/en/libs/CAA%20Device%20Diagnosis/3.5.17.0/CAA-Device-Diagnosis/Function-Blocks/Reconfigure/Reconfigure.html#:~:text=This%20function%20block%20reads%20and,take%20effect. Although I have not tried it with Modbus, I had great success with EtherNet/IP, Profinet and EtherCAT. You can also have a look at the other functions in this library. There are useful functions to help iterate through all the nodes under a master node.
Last updated: 2025-08-12

Post by griinde on display values with frames ^{CODESYS Forge talk (Post)}
i want to make a frame for use multiple places for showing pressure and temperature. ive tried to decleare a variable in the frame config, if i put a fixed value in the value text field it show correct until i simulate. and if i point to a variable i gvl it show the name of the variable, and when i simulate it shows rValue. is there a way to do what i want?
Last updated: 2025-08-16

Post by camjam on BOOL variable in OPC UA and modbus simultaneously ^{CODESYS Forge talk (Post)}
I have come across this. The only way i could get it to work would be to define a word that is also the same address as the Bools. eg %MX600.0 through to %MX600.15 would be individually defined in the variables and them have another variable word defined at %MW300. You still need to break out the word in what ever program you are using to read/write the OPCUA tags.
Last updated: 2025-08-18

Post by micky on Mail_Service_SL Lib ^{CODESYS Forge talk (Post)}
Hallo zusammen, ich habe folgendes Problem. Ich möchte mit der Lib Mail_Service_SL ein Mail versenden. Manchmal funktioniert es auch aber nicht zuverlässig. Wenn ich den Funktionsblock sendmail mit den entsprechenden Daten aufrufe bekomme ich die Fehlermeldung CHECK_RESULT_FAILD. Laut Dokumentation sollte im sServerMessage der Grund stehen, dieser ist aber leer. Was kann der Grund hierfür sein? Gibt es eine ander Lib mit der ich Mails versenden kann? Viele Grüße Micky
Last updated: 2025-08-19

Post by pernockham on Persistence Manager: Config File not found? ^{CODESYS Forge talk (Post)}
I still cannot enable persistent manager for my project (and successfully login to a device). Project compiles with no errors but during download/login it fails with the fairly limited message "one or more errors occurred". The only clue I get from the system that this messages is displayed during "Generating code..: relocation pou". Any tips pointing me in a direction how to solve this very much appreciated!
Last updated: 2025-08-22

Post by timvh on I want to show the current recipe name in the visualization screen ^{CODESYS Forge talk (Post)}
Maybe the easiest solution for you is to add one STRING variable to your recipe and enter the name of the recipe in variable value. This is little bit double the work (naming the recipe and entering the value of the STRING variable), but in that case you always have the current value of the variable which you can read from the application and show in the visualization.
Last updated: 2025-09-04

Post by sandro66 on Application-based license Modbus Channels ^{CODESYS Forge talk (Post)}
Hi Gatto, Using version 3.5.21.xx, it is no longer possible to use Modbus function blocks (I make extensive use of these FBs.)as shown in the example. https://content.helpme-codesys.com/en/CODESYS%20Examples/_ex_modbus_example.html The compiler detects one Modbus instance for each instance of the communication FB block. The example program above, although simple, reports 8 Modbus instances when compiled with the latest version. Codesys Support says that you must use fieldbus I/O mapping, but this will result in the loss of the ability to programmatically modify communication parameters. Sandro
Last updated: 2025-09-04

Post by davidbo on All the things needed for anonymous login to OPC UA ^{CODESYS Forge talk (Post)}
When you have a deep object structure where not all values are not exposed to OPC UA, the top object will not have a V check mark but be filled fully out. In that case CODESYS do not always registrate changes to inner object. Solution set a V in the checkbox of the top object, build, download. Now you can browse, but all values in the top object will be selected, then you can deselect the ones you don't want, build, download and it works
Last updated: 2025-09-10

Post by monw on Unable to Re-Import Native XML Exported Using CODESYS Script API ^{CODESYS Forge talk (Post)}
When exporting a Logical Device or Logical Exchange GVL using the native XML export functionality of the CODESYS Script API, I encounter the following error upon re-import: "Error in IEnumeratorOfTWrapper. Current. Could not cast: System.String in System.Char" I am using CODESYS V3.5 SP21 Patch 2. Is there a known solution or workaround for this issue? Notably, importing the same XML file through the CODESYS Engineering IDE's menu import works without error.
Last updated: 2025-09-12

Post by kurtk on SysProcess Execute Command unable to run commands with special characters ^{CODESYS Forge talk (Post)}
Thank you for this additional information. Could you please provide the references to the official documentation where you found this information ? I got as far as: Then insert this: [SysProcess] BasePriority=Realtime Command=AllowAll devoid of references of where the CodesysContol.cfg file was located or of the need to run codesys as root I incrementally located bits of information with perplexity searches but remained mired at error 25 ERR_NO_ACCESS I am curious whether root access is MANDATORY to run SysProcessExecuteCommand (- and/or any other SysProcess functions) or if a more access-constrained User=quasiroot could suffice without the security concerns ? Apparently codesys runs fine without User=root for almost everything... That raises the question: What IS the default codesys user ? I notice in the prototypes: VAR sCommand : STRING := '/usr/bin/whoami'; sOutput : STRING(255); refCommand : REFERENCE TO STRING; refOutput : REFERENCE TO STRING; resultCmd : UDINT; END_VAR whenever I attempt to build this Codesys v3.5 SP2 whines that "cannot convert type REFERENCE TO STRING to STRING" don't remember the exact message... Apparently this happens whenever a fixed-length string is involved. if I get rid of (255) and just set the string := ' '; that is sufficient to make the compiler happy. Is this a recently enforced constraint ? Why does this compile for you and not for me ? There are references to functions / utilities which are used/needed to massage the string references - but I see no specific details... I also notice you specify: Make sure the lib SysProcessImplementation, SysTypes, and CmpErrors is on the project. I don't comprehend why all of the dependent libraries are not automatically referenced, added ? I don't recall seeing anywhere but here that SysProcessImplementation must be included... It just seems odd that the default is to exclude essential libraries, or require alchemical conjuring to assemble all the ingredients for gnat soup ;-) Thanks a lot... I'm still a codesys newby getting my wheels on - or sometimes just partially on
Last updated: 2025-09-12

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

Post by pernockham on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
An update note. Still using linux/Qemu. Still happy, but sometimes some things are harder. I lost the "bridge" connection to my VM (meaning for instance I couldnt "scan network" and find local units. Have spent tons of hours to find out why. Finally it seems the traffic got blocked by the firewall/iptables so needed to set rules for that. So friendly note that rules must allow forward traffic to/from you configured host bridge device.
Last updated: 2025-09-22

Post by bmatlove on AXIS_REF_SM3 Error Codes? ^{CODESYS Forge talk (Post)}
I'm trying to firm up alarming of axis faults. Declutter the code and figure out what's what. Diving into it, I see the AXIS_REF_SM3 function block provides uiDriveInterfaceError and dwErrorId, but I can't find any significance of these further than Drive interface error number Parameter number: 1014 and Drive specific error identifier, parameter number: 1031, respectively. Is there some corresponding appendix I could use to decode these? Also, is there any relation to the Error ID (of type SMC_Error) of the MC POUs? MC_Jog, MC_Reset, MC_MoveRelative, etc? If so, are the above errors redundant? Thanks in advance.
Last updated: 2025-09-22

Sort by relevance or date