Post by timvh on Current Visu name without Current Visu Variable ^{CODESYS Forge talk (Post)}
To change the current visualization for (all) webclients: Add the library “Visu Utils” and use the following example code: VAR xChangeVisu: BOOL; fbChangeVisu : VU.FbChangeVisu; END_VAR // Change to Visu2 when setting xChangeVisu to TRUE fbChangeVisu( xExecute:= xChangeVisu, xDone=> , xBusy=> , xError=> , itfClientFilter:= VU.Globals.OnlyWebVisu, //itfFilter, eError=> , sVisuName:= 'Visu2'); IF fbChangeVisu.xDone OR fbChangeVisu.xError THEN xChangeVisu := FALSE; END_IF
Last updated: 2025-08-13

Post by nz-dave on Bool turning on in case stament in wrong state? ^{CODESYS Forge talk (Post)}
pretty sure its not. ive done a cross reference and only have one write that sets it to true. Only way i can stop it is to remove the function block call from the main pou that is running said case. its got me stumped:/
Last updated: 2023-12-16

Post by timvh on Device diagnosis ( EtherCAT IO card ) ^{CODESYS Forge talk (Post)}
You can get the state by just using the name of your node (same name as in device tree): VAR etcState: IoDrvEthercatDriverLib.ETC_SLAVE_STATE; END_VAR etcState := EJ1100.wState; Alternatively, you can iterate through the device tree to get the status of all (Ethercat) nodes. See here an example (no guarantee it works, just give as suggestion): PROGRAM P_IO_State VAR CONSTANT uiMAX_NR_OF_TERMINALS : UINT := 100; END_VAR VAR // general device diagnosis // can only be used when the Device - PLC Settings - Advanced settings - enable diagnosis for devices is enabled // this will add the DED library coupler: DED.INode; terminal: DED.INode; aDeviceState: ARRAY[0..uiMAX_NR_OF_TERMINALS - 1] OF DED.DEVICE_STATE; uiTerminalCount : UINT; uiIndex : UINT; // for each terminal check if it implements device diagnostics xQueryResult: BOOL; itfDevice : DED.IDevice2; xDiagAvailable: BOOL; eError: DED.ERROR; xEverythingOK: BOOL; END_VAR uiTerminalCount := 0; // start at the top of the device tree with the first EtherCAT coupler coupler := EtherCAT_Master.FirstChildNode; WHILE coupler <> 0 DO // for each coupler that is found start at the first terminal terminal := coupler.FirstChildNode; WHILE terminal <> 0 AND uiTerminalCount < uiMAX_NR_OF_TERMINALS - 1 DO // for each terminal that is found get the status through the device diagnosis interface xQueryResult := __QUERYINTERFACE(terminal, itfDevice); IF xQueryResult THEN aDeviceState[uiTerminalCount] := itfDevice.GetDeviceState(xDiagnosisInfoAvailable => xDiagAvailable, eError => eError); uiTerminalCount := uiTerminalCount + 1; END_IF terminal := terminal.NextSiblingNode; END_WHILE coupler := coupler.NextSiblingNode; END_WHILE uiIndex := 0; xEverythingOK := TRUE; WHILE uiIndex < uiTerminalCount DO IF aDeviceState[uiIndex] <> DED.DEVICE_STATE.RUNNING THEN xEverythingOK := FALSE; EXIT; END_IF uiIndex := uiIndex + 1; END_WHILE
Last updated: 2025-02-06

Post by mxj262 on FB having single input but initialized with Array ^{CODESYS Forge talk (Post)}
I am adding elements of an ARRAY using pointer to access each element inside a FOR loop and the FOR loop does not stop! What is the right way to use pointers in such case?? I have another loop that is not using pointer and it stops but the loop using pointer keep on adding. METHOD FB_Init: BOOL VAR_INPUT bInitRetains: BOOL; // TRUE: the retain variables are initialized (reset warm / reset cold) bInCopyCode: BOOL; // TRUE: the instance will be copied to the copy code afterward (online change) END_VAR VAR_IN_OUT // basically REFERENCE TO window_buffer: ARRAY [*] OF INT; // array of any size END_VAR THIS^.windowPtr := ADR(window_buffer[0]); THIS^.windowSize := UPPER_BOUND(window_buffer, 1) - LOWER_BOUND(window_buffer, 1) + 1; FUNCTION_BLOCK FB500 VAR_INPUT END_VAR VAR_OUTPUT END_VAR VAR windowPtr: POINTER TO INT; windowSize: DINT; currentIndex: UINT; element1:INT; element2:INT; i:INT; j:INT; sum:DINT:=0; END_VAR element1:=windowPtr[0]; // read the first element of the Array dynamic memorry element2:=windowPtr[1]; FOR i:=0 TO (TO_INT(windowSize-1)) BY 1 DO // this loop does not stop Sum:=sum + windowPtr[i]; END_FOR FOR j:=0 TO 5 BY 1 DO // this loop stops j:=j+1; END_FOR https://ibb.co/k3DhkZT
Last updated: 2024-05-06

Post by blitz on Can't get SMC_SmoothPath to work ^{CODESYS Forge talk (Post)}
This code works well: PROGRAM PLC_PRG VAR execute : BOOL; abort : BOOL; doMDI : BOOL; manualDataInput : STRING(1024) := 'N5 G01 X0.00 Y200.00 N6 G01 X200.00 Y200.00 N7 G01 X200.00 Y0.00 N8 G01 X0.00 Y0.00'; stringStreamArray: ARRAY[0..NUMBER_OF_CHAINS-1] OF SMC_StringStream2 ; i : UDINT; readNCFromStream : SMC_ReadNCFromStream; sentencesFromStringSteam : SMC_GSentenceQueue ; interpreter : SMC_NCInterpreter; interpreterGeoInfoBuffer: ARRAY[1..GEO_INFO_BUFFERS_SIZE] OF SMC_GeoInfo; roundPath : SMC_RoundPath; roundPathGeoInfoBuffer: ARRAY[1..GEO_INFO_BUFFERS_SIZE] OF SMC_GeoInfo; END_VAR VAR CONSTANT MDI_FILE_NAME : STRING := 'MDI.nc'; NUMBER_OF_CHAINS : UDINT := 15; GEO_INFO_BUFFERS_SIZE : DINT := 500; END_VAR readNCFromStream.bExecute := interpreter.bExecute := roundPath.bExecute := execute; readNCFromStream.bAbort := interpreter.bAbort := roundPath.bAbort := abort; IF doMDI THEN stringStreamArray[0].Init(MDI_FILE_NAME); stringStreamArray[0].AppendData(manualDataInput); stringStreamArray[0].SetEndOfData(); i := 0 ; WHILE i < NUMBER_OF_CHAINS DO readNCFromStream.aStream[i] := stringStreamArray[i]; i := i + 1 ; END_WHILE readNCFromStream.bExecute := TRUE; IF readNCFromStream.bBusy THEN ; END_IF END_IF readNCFromStream( fDefaultVel := 10, fDefaultAccel := 10, fDefaultDecel := 10, fDefaultVelFF := 10, fDefaultAccelFF := 10, fDefaultDecelFF := 10, sentences := sentencesFromStringSteam ); interpreter( sentences:= sentencesFromStringSteam, nSizeOutQueue:= SIZEOF(interpreterGeoInfoBuffer), pbyBufferOutQueue:= ADR(interpreterGeoInfoBuffer)); roundPath( poqDataIn := interpreter.poqDataOut, dRadius := , dAngleTol := , nSizeOutQueue := SIZEOF(roundPathGeoInfoBuffer), pbyBufferOutQueue := ADR(roundPathGeoInfoBuffer));
Last updated: 2026-01-09

Post by lepewe4ka on Sysmac Studio to Codesys ^{CODESYS Forge talk (Post)}
Could you send me an example? I would like to generate a data structure using XML files.
Last updated: 2023-09-20

Post by lepewe4ka on Sysmac Studio to Codesys ^{CODESYS Forge talk (Post)}
Could you send me an example? I would like to generate a data structure using XML files.
Last updated: 2023-09-20

Post by vladimirsmall on Send data to USB ^{CODESYS Forge talk (Post)}
Hello/ Need send some file ( for example Array of string) to USB. Which library need used for this. Thank you
Last updated: 2024-07-20

Post by damian177 on Problem with downloading OPC UA tags by Data Source Manager ^{CODESYS Forge talk (Post)}
After 3 hours is some progress - please find in attachment - progress1.jpg
Last updated: 2024-09-04

Post by lsislsis on RPI Serial port connects with no errors but not data being transmitted or received ^{CODESYS Forge talk (Post)}
Is there any solution because we have the same problem with other hardware?
Last updated: 2024-09-30

Post by tonyadrem on update data/tim ^{CODESYS Forge talk (Post)}
Hello How to update the dates from timestamp to the actual time? THX!
Last updated: 2025-08-25

Post by tonyadrem on update data/tim ^{CODESYS Forge talk (Post)}
Hello How to update the dates from timestamp to the actual time? THX!
Last updated: 2025-08-25

Post by trycyclepower on How to transfer data from DINT to Union(16 Bools) which I need to use in Few FBs ^{CODESYS Forge talk (Post)}
Thanks a lot, it worked.
Last updated: 2023-12-14

Post by eschwellinger on Data Transferring between 2 PLCs in a same PC ^{CODESYS Forge talk (Post)}
.. this will not work on the same pc
Last updated: 2024-02-06

Post by hasangenc on DI4 USB - Transfer Data ^{CODESYS Forge talk (Post)}
Hi! Did you find any solution to your problem. I'm having the same right now. Best Regards.
Last updated: 2024-02-19

Post by hasangenc on DI4 USB - Transfer Data ^{CODESYS Forge talk (Post)}
Well, Hi again. I solve the problem, if anyone having the same problem, I might help. You can reach me through this platform.
Last updated: 2024-02-22

Post by egau on Git - User identification data is lost when codesys is closed ^{CODESYS Forge talk (Post)}
It bothers me for sure.
Last updated: 2024-04-04

Post by nano on Persistent variable storage ^{CODESYS Forge talk (Post)}
use the persistence manager. with the persistence-manager, you're aböe to define how, when and where you store your data
Last updated: 2024-06-16

Post by mos89p on Data source and safety PLC ^{CODESYS Forge talk (Post)}
it works only for me when i specify an IP adress in communication tab
Last updated: 2024-06-17

Post by albertovalente on How extract JSONElement containing Array data ^{CODESYS Forge talk (Post)}
Hi Creator: hazarath, Have you fix the problem? because I have the same issue Thanks a lot
Last updated: 2025-11-12

Post by albertovalente on How extract JSONElement containing Array data ^{CODESYS Forge talk (Post)}
Hi Creator: hazarath, Have you fix the problem? because I have the same issue Thanks a lot
Last updated: 2025-11-12

Post by jbcregen on Accessing parameters from a structure or function block with the web interface ^{CODESYS Forge talk (Post)}
Confirmed. The Data Analyzer tool can indeed access all OPC-UA symbols. Thanks !
Last updated: 2025-12-02

Post by ranadheer on Publish Multiple Topics via MQTT ^{CODESYS Forge talk (Post)}
could you suggest the process you followed to make publish the data through the broker application (Mosquitto)
Last updated: 2025-12-10

Post by ranadheer on Publish Multiple Topics via MQTT ^{CODESYS Forge talk (Post)}
could you suggest the process you followed to make publish the data through the broker application (Mosquitto)
Last updated: 2025-12-10

Post by martinlithlith on CODESYS Control for Raspberry Pi SL on Raspberry Pi 4b ^{CODESYS Forge talk (Post)}
hi! a quick question - is it possible to run CODESYS Control for Raspberry Pi SL license on a raspberry pi 4b? i know it says all models in the data sheet, but im not sure it the data sheet has been updated seince the MC-processors for pi. best, Martin
Last updated: 2023-09-04

Sort by relevance or date