Post by mubeta on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
Hi gseidel, before moving to HW implementation, I had created the same program in simulation mode with virtual drives and, as far as I remember, everything worked fine simulating process and the few useful inputs. So it does not seem to be a SoftMotion library problem, but rather a problem with dynamics or physical axis adjustments. What escapes me, however, is the fact that this function is supposed to perform a position shift virtually, in fact without interfering with the axis itself, thus independent of its adjustments. MC_SetPosition() is not a homing function, in fact it is clearly intended to be executed on the fly with the axis moving. Now I'll see if I can reduce the program, although I don't like it very much. In my life I have learned that problem searches should be done on the part, and not in a more or less similar way.
Last updated: 2025-01-10

Post by reinier-geers on Monitor a Can J1939 ^{CODESYS Forge talk (Post)}
Hi , Can i monitor a other Canbus and use the data ? Ive got a mobile crane. So i want to add a device with an unused adres. Then Read the Joystick and use some buttons for an optional device
Last updated: 2025-01-15

Post by timvh on Wago PFC200 Ethernet / IoDrvEthernet Issue? ^{CODESYS Forge talk (Post)}
Could you send a screenshot of the Ethernet "General" settings? In that screen you can also search for the Ethernet interface you would like to use for your communication. Did you do that? Did you change any settings manually in the CODESYSControl_user.cfg?
Last updated: 2025-01-22

Post by smartcoco on OPC server in "Communication manager" ^{CODESYS Forge talk (Post)}
I don't recommend using 'Communication Manager'. Under 'Communication Manager', the 'NodeId' type of OPC UA can only be of type 'OPAQUE'. This will bring compatibility issues to the development of the upper computer.
Last updated: 2025-01-24

Post by chrisdeloglos on Network Variables not updating ^{CODESYS Forge talk (Post)}
Thanks for the comment. I'm using Weidmueller UC20-WL2000-AC's and changing the broadcast address to match the current subnet this worked for me as well!
Last updated: 2025-01-27

Post by trusty-squire on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
I don't fully understand the issue, but if the encoding is a problem you can try testing with WSTRING datatype instead of STRING. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_datatype_wstring.html
Last updated: 2025-01-30

Post by runtimevictor on virtual plc vPLC configure nics ^{CODESYS Forge talk (Post)}
Hello, When I add 2 nics in vPLC this happens to me..., why is it? If I just put one of the two NICs, the vPLC runtime instance starts running correctly...
Last updated: 2025-02-02

Post by dogulas on Removing a symbol from the IEC Symbols Editor grid ^{CODESYS Forge talk (Post)}
here is a screenshot. I dragged Device.Application > GVL_Sched > Requests to the grid on the right, but I cannot remove it from the grid.
Last updated: 2025-02-12

Post by nano on Overview codesyscontrol.cfg commands ^{CODESYS Forge talk (Post)}
a overall-information doesn't exist public. i made a long time ago a library by catching all punluc settings and/or configfiles. if u have a special question, i'll try to find it out
Last updated: 2025-02-20

Post by george32 on TCP Server ^{CODESYS Forge talk (Post)}
Thank you for your advice Rinie, I have tried to follow this example but found one problem.When I disconnect with Hercules the system does not acknowledge the lost of its connection this could result in critical errors. Because of this error I am trying to implement the Syssocket library. With this library I am having a problem which I could not solve. I have the following code: ip_adres : STRING :='0.0.0.0'; port : WORD := 5000; iStep : INT := 1; // Socket information Socket_handler : SysSocket_Interfaces.RTS_IEC_HANDLE; Socket_handler_result : SysSocket_Interfaces.RTS_IEC_RESULT; Socket_adress : SysSocket_Interfaces.SOCKADDRESS; Addres_Convert : SysSocket_Implementation.RTS_IEC_RESULT; // Bind information Bind_handler : SysSocket_Interfaces.RTS_IEC_RESULT; // Listener Information Listener_handler : SysSocket_Interfaces.RTS_IEC_RESULT; Addres_Convert := SysSocket_Implementation.SysSockInetAddr(szIPAddress:= ip_adres,pInAddr:= ADR(Socket_adress.sin_addr)); Socket_adress.sin_family:= SysSocket_Interfaces.SOCKET_AF_INET; Socket_adress.sin_port := SysSocket_Implementation.SysSockHtons(usHost:= port); CASE iStep OF 1: // Create Socket Socket_handler :=SysSockCreate( iAddressFamily :=SysSocket_Interfaces.SOCKET_AF_INET, diType:=SysSocket_Interfaces.SOCKET_STREAM, diProtocol:=SysSocket_Interfaces.SOCKET_IPPROTO_TCP, pResult:=ADR(Socket_handler_result)); IF Socket_handler = SysSocket_Interfaces.RTS_INVALID_HANDLE THEN iStep := 1; ELSE iStep := 2; END_IF 2: Bind_handler := SysSocket_Implementation.SysSockBind( hSocket:=Socket_handler, pSockAddr :=ADR(Socket_adress), diSockAddrSize:=SIZEOF(Socket_adress) ); 3: Listener_handler := SysSocket_Implementation.SysSockListen( hSocket :=Socket_handler, diMaxConnections :=1); END_CASE When I am trying to get this working, the SysSockBind function gives a value of 16#207 which means adress already in use. I find this weird because of the IP-adress of 0.0.0.0. I think I am converting the Ip-adress in the wrong way, but the code does not give a error arround this. So therefore I cannot find the solution to this problem. I hope someone could help me with this problem. Thanks in advance George
Last updated: 2025-02-20

Post by ojz0r on Multiple applications on one device sharing variables. ^{CODESYS Forge talk (Post)}
One thing you could do is create an object with the variable as field with a function and procedure to get the variable (read) and set the variable (write). These are then called from your program and the vizualization.
Last updated: 2025-02-20

Post by ramesh on DELTA PLC AS228T ^{CODESYS Forge talk (Post)}
I have Delta AS228T PLC. Is it possible to create a program in Structured Text using Codesys ? In other words, is DELTA AS228T PLC compatible with CODESYS ?
Last updated: 2025-03-01

Post by bingo on PLC Shell commands via ST Code ^{CODESYS Forge talk (Post)}
For a permanent change, you may need to update the PLC configuration file or set the IP at startup using retained variables.
Last updated: 2025-03-02

Post by fabiodasilveira on PLC Shell commands via ST Code ^{CODESYS Forge talk (Post)}
Thank you, Bingo. Your idea of adding the change to the start up process works. However, I am still intrigued with the fact that SysSockSetIPAddress(strEthernetPort:= '0', strIPAddress:= '192.168.2.12') is different from PLC Shell (setipaddr 0 192.168.2.12).:-(
Last updated: 2025-03-04

Post by pernockham on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
Started playing with the idea of ditching windows for linux, one of the obstacles would be Codesys development. Alternatives: - linux with wine? - Run windows/codesys through virtual machine I guess a vm is the way to go? Anyone out there that could share their experience?
Last updated: 2025-03-05

Post by felipemsgarcia on DELTA PLC AS228T ^{CODESYS Forge talk (Post)}
Hello, You can create a program in ST for AS228T using either DELTA ISPSoft or DELTA DIADesigner. The only DELTA PLCs/Controllers I know of compatible with CODESYS are AX-3 and AX-8 series. You will need to install the proper packages, though. Cheers!
Last updated: 2025-03-07

Post by trusty-squire on Help for a newbie ^{CODESYS Forge talk (Post)}
Try watching this video in it's entirety, looks like it should have what you need to get running. https://www.youtube.com/watch?v=kyj36oRpA04
Last updated: 2025-03-11

Post by pistola on Making a Visu Element normally invisible and visible if variable is true ^{CODESYS Forge talk (Post)}
You can use Not(Variable) in that Invisible spot. Example if you want it to be invisible when the bool is false then: Not(True) = False Not(False) = True
Last updated: 2025-03-14

Post by timvh on SysProcessCreate2 on Linux runtime ^{CODESYS Forge talk (Post)}
Maybe it is better to use the functionality of the Extension Package: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_extension.html https://content.helpme-codesys.com/en/CODESYS%20Examples/_ex_extension_package.html
Last updated: 2025-03-17

Post by peterkcontrols on Codesys Network driver install for Codesys Control RTE x64 ^{CODESYS Forge talk (Post)}
Sorry to clarify the issues say as per the attached image. I copied and pasted the unresolved issues from someone else who had a similar problem.
Last updated: 2025-03-18

Post by peterkcontrols on Codesys Network driver install for Codesys Control RTE x64 ^{CODESYS Forge talk (Post)}
Sorry to clarify the issues say as per the attached image. I copied and pasted the unresolved issues from someone else who had a similar problem.
Last updated: 2025-03-18

Post by eschwellinger on Codesys Network driver install for Codesys Control RTE x64 ^{CODESYS Forge talk (Post)}
is this latest Control RTE Version? Strange is that the component does not occure in the list of component to add.
Last updated: 2025-03-18

Post by pernockham on Persistence Manager: Config File not found? ^{CODESYS Forge talk (Post)}
Back in november I paused this, but wanted to reattempt using the persistent manager, the behavior is still the same. Most "login attempts" s are stopped with the message "One or more errors occurred" but I have no idea what that error might be. The only clue is this message is presented while the lower left status box says "Generating code...: relocation pou". For clarification. Build/Generate code is successful, no errors. Error appears when I try to download/login (physical or simulation) to a device. I did manage to login (in simulation mode) at one point, but then the error message "PersistenceChannel: Config file not found!". And no persistence files were created. I have done device-tree/reset-orgin also clean/clean all etc. Removed/re-inserted persistance manager. Behaviour is just the same. Removing Persistence Manage and everything is working OK. Is there possibly more info somewhere about the "One or more errors occured"-message?
Last updated: 2025-03-20

Post by vnlgomez5 on Toolbox missing item ^{CODESYS Forge talk (Post)}
Wow, spent a lot of time trying to figure out what my problem was, I was seeing the same limited Toolbox. Thank you so much.
Last updated: 2025-03-25

Post by nonstop-cat on Problem of assigning physical addresses to variables of type ARRAY OF ARRAY as MW and QW ^{CODESYS Forge talk (Post)}
Array writing method error,,,<arrayname>: ARRAY [<ll1>..<ul1>, <ll2>..<ul2>, <ll3>..<ul3>]</ul3></ll3></ul2></ll2></ul1></ll1> OF <basedatatype></basedatatype></arrayname>
Last updated: 2025-03-31

Sort by relevance or date