Post by faceplant on Energie price ^{CODESYS Forge talk (Post)}
Given the response to your API request, I don't think this is a CODESYS issue. The response says ... Please provide a valid API token ... so you must get a valid API key from enever.nl
Last updated: 2024-12-18

Post by imdatatas on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Dear @gseidel, Thank you for your response. I will be looking forward to the release of new version. Best Regards, Imdat
Last updated: 2024-12-20

Post by jeroenaero on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
For what it is worth taking into account on version 4.18: Softmotion 4.17 doesn't work with the SMC_TRAFO_Scara2. Very small numbers come out of dA and dB. Going back to version 4.16 solves the issues.
Last updated: 2025-01-07

Post by eschwellinger on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
should work, could you please check on the target: top if the the gateway is running -> you should see codesysedge.bin and cat /var/opt/codesysedge/codesysedge.log
Last updated: 2025-01-07

Post by yannickasselin on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Not sure this will help you but I had the same issue and was able to activate the license on a Windows PC using the Web Depot in a web browser. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_installing_license.html
Last updated: 2025-01-08

Post by winki on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
Thx for your help, I just Uninstall and install again codesys. I did it as admnistrator and now it is working... I did not change anything into the target configuration. Only my codesys on my computer. Loic,
Last updated: 2025-01-10

Post by winki on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
Thx for your help, I just Uninstall and install again codesys. I did it as admnistrator and now it is working... I did not change anything into the target configuration. Only my codesys on my computer. Loic,
Last updated: 2025-01-10

Post by reinier-geers on Monitor a Can J1939 ^{CODESYS Forge talk (Post)}
Hi , Can i monitor a other Canbus and use the data ? Ive got a mobile crane. So i want to add a device with an unused adres. Then Read the Joystick and use some buttons for an optional device
Last updated: 2025-01-15

Post by eschwellinger on FAILURE TO OPEN PROJECT ON ANOTHER COMPUTER ^{CODESYS Forge talk (Post)}
I would just use projectachives instead of using projects if you work with different pc's then all project related libs and devices are included.
Last updated: 2025-01-20

Post by timvh on Wago PFC200 Ethernet / IoDrvEthernet Issue? ^{CODESYS Forge talk (Post)}
Could you send a screenshot of the Ethernet "General" settings? In that screen you can also search for the Ethernet interface you would like to use for your communication. Did you do that? Did you change any settings manually in the CODESYSControl_user.cfg?
Last updated: 2025-01-22

Post by timvh on FAILURE TO OPEN PROJECT ON ANOTHER COMPUTER ^{CODESYS Forge talk (Post)}
Is it really the same CODESYS version with the same add-ons? Maybe open the CODESYS installer on your home laptop, and export the configuration. On your work PC open the CODESYS installer and import the configuration.
Last updated: 2025-01-22

Post by smartcoco on OPC server in "Communication manager" ^{CODESYS Forge talk (Post)}
I don't recommend using 'Communication Manager'. Under 'Communication Manager', the 'NodeId' type of OPC UA can only be of type 'OPAQUE'. This will bring compatibility issues to the development of the upper computer.
Last updated: 2025-01-24

Post by chrisdeloglos on Network Variables not updating ^{CODESYS Forge talk (Post)}
Thanks for the comment. I'm using Weidmueller UC20-WL2000-AC's and changing the broadcast address to match the current subnet this worked for me as well!
Last updated: 2025-01-27

Post by trusty-squire on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
I don't fully understand the issue, but if the encoding is a problem you can try testing with WSTRING datatype instead of STRING. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_datatype_wstring.html
Last updated: 2025-01-30

Post by runtimevictor on virtual plc vPLC configure nics ^{CODESYS Forge talk (Post)}
Hello, When I add 2 nics in vPLC this happens to me..., why is it? If I just put one of the two NICs, the vPLC runtime instance starts running correctly...
Last updated: 2025-02-02

Post by dogulas on Removing a symbol from the IEC Symbols Editor grid ^{CODESYS Forge talk (Post)}
here is a screenshot. I dragged Device.Application > GVL_Sched > Requests to the grid on the right, but I cannot remove it from the grid.
Last updated: 2025-02-12

Post by ojz0r on Multiple applications on one device sharing variables. ^{CODESYS Forge talk (Post)}
One thing you could do is create an object with the variable as field with a function and procedure to get the variable (read) and set the variable (write). These are then called from your program and the vizualization.
Last updated: 2025-02-20

Post by ramesh on DELTA PLC AS228T ^{CODESYS Forge talk (Post)}
I have Delta AS228T PLC. Is it possible to create a program in Structured Text using Codesys ? In other words, is DELTA AS228T PLC compatible with CODESYS ?
Last updated: 2025-03-01

Post by bingo on PLC Shell commands via ST Code ^{CODESYS Forge talk (Post)}
For a permanent change, you may need to update the PLC configuration file or set the IP at startup using retained variables.
Last updated: 2025-03-02

Post by codesysbeginner on Enable and Disable Project IO programmatically ^{CODESYS Forge talk (Post)}
@eschwellinger Somehow this code doens't work for me in Codesys V3.5.19. Is this code supposed to work in simulation mode as well?
Last updated: 2025-03-03

Post by fabiodasilveira on PLC Shell commands via ST Code ^{CODESYS Forge talk (Post)}
Thank you, Bingo. Your idea of adding the change to the start up process works. However, I am still intrigued with the fact that SysSockSetIPAddress(strEthernetPort:= '0', strIPAddress:= '192.168.2.12') is different from PLC Shell (setipaddr 0 192.168.2.12).:-(
Last updated: 2025-03-04

Post by pernockham on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
Started playing with the idea of ditching windows for linux, one of the obstacles would be Codesys development. Alternatives: - linux with wine? - Run windows/codesys through virtual machine I guess a vm is the way to go? Anyone out there that could share their experience?
Last updated: 2025-03-05

Post by felipemsgarcia on DELTA PLC AS228T ^{CODESYS Forge talk (Post)}
Hello, You can create a program in ST for AS228T using either DELTA ISPSoft or DELTA DIADesigner. The only DELTA PLCs/Controllers I know of compatible with CODESYS are AX-3 and AX-8 series. You will need to install the proper packages, though. Cheers!
Last updated: 2025-03-07

Post by trusty-squire on Help for a newbie ^{CODESYS Forge talk (Post)}
Try watching this video in it's entirety, looks like it should have what you need to get running. https://www.youtube.com/watch?v=kyj36oRpA04
Last updated: 2025-03-11

Post by pistola on Making a Visu Element normally invisible and visible if variable is true ^{CODESYS Forge talk (Post)}
You can use Not(Variable) in that Invisible spot. Example if you want it to be invisible when the bool is false then: Not(True) = False Not(False) = True
Last updated: 2025-03-14

Sort by relevance or date