Post by rmaas on Direct Pointers in IOMapping for EtherCAT with IoDrvEthercatLib.ETCSlave_Dia ^{CODESYS Forge talk (Post)}
Wow, this is next level for me, very impressive! glad you found a solution, thanks for sharing!
Last updated: 2024-02-13

Post by esave on Stepper Drive with Ethercat ^{CODESYS Forge talk (Post)}
The stepper supports CiA402 maybe I can use a CiA402 library to controll the stepper motor. Has anybody experience with that?
Last updated: 2024-03-21

Post by albzen on EtherCat Slaves diagnosis ^{CODESYS Forge talk (Post)}
Hello everybody, I'm working on a RunTime Plc (Codesys 3.5.16/18.20) connected to an EtherCat bus with many devices. The bus has some communication fault but I don't know how understand which is the device or the cable that has the trouble. To understand the cause of the problem I would like to read the WKC (Working counter) of the devices (0x0300...0x030C), how is explained in EtherCat documents, but it seems that the read of the counter is disabled. Attached there is an extract of the Ethercat document. Can anyone give me some advice about how and with function can I read it. Thank you in advance!
Last updated: 2024-03-29

Post by albzen on EtherCat Slaves diagnosis ^{CODESYS Forge talk (Post)}
Hello everybody, I'm working on a RunTime Plc (Codesys 3.5.16/18.20) connected to an EtherCat bus with many devices. The bus has some communication fault but I don't know how understand which is the device or the cable that has the trouble. To understand the cause of the problem I would like to read the WKC (Working counter) of the devices (0x0300...0x030C), how is explained in EtherCat documents, but it seems that the read of the counter is disabled. Attached there is an extract of the Ethercat document. Can anyone give me some advice about how and with function can I read it. Thank you in advance!
Last updated: 2024-03-29

Post by dkugler on EtherCAT fieldbus ^{CODESYS Forge talk (Post)}
There is an example for activating/deaktivating an optional Slave in the FAQ's: https://faq.codesys.com/pages/viewpage.action?pageId=49283084
Last updated: 2024-04-12

Post by xiaonyan on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Thanks for the reply. so where can i get this help from...the new post or link....where can i find it
Last updated: 2024-05-17

Post by fugtwad on Automation Builder V2.5 EtherCAT CM579 Master Scan for devices - >No gateway selected ^{CODESYS Forge talk (Post)}
ABB Automation Builder v2.5.0.22 Premium CodeSys 2.3.9.62 Running on Win 10 VM x64 Goal: I have an EtherCAT topology issue which normally a "Scan for devices.." on the EtherCAT master would shed some light on. Issue: Upon trying such I get a "No gateway selected" error. Question: How might I point the the "scanner" at a gateway? What is working: Gateway is running in system tray. I can go online to PLC. A scan from the "Diagnostics live" tab of the EtherCAT master gives slave status. What I have tried: Restarting gateway in system tray. Exiting system tray gateway and reloading it. Turning off firewall. Contacting ABB support multiple times. Any help appreciated.
Last updated: 2024-05-20

Post by bruno-roth on Codesys access to DICTIONARY OBJECTS of ethercat (CoE ) Servo Drive ^{CODESYS Forge talk (Post)}
You could use the FBs ETC_CO_SdoWrite and ETC_CO_SdoRead
Last updated: 2024-06-19

Post by justthefacts77 on How to generate an "ENI" file ^{CODESYS Forge talk (Post)}
I think this is really now "Generate EtherCAT XML" command which gives the ENI topology info.
Last updated: 2024-08-08

Post by dkugler on Step motor ECT60 Ethercat in codesys 3.5 ^{CODESYS Forge talk (Post)}
double click the master and the ECT60 and have a look what's shown in the tap online, state and log?
Last updated: 2024-08-14

Post by eschwellinger on Step motor ECT60 Ethercat in codesys 3.5 ^{CODESYS Forge talk (Post)}
for Control Win you need to have installed Npcap https://www.winpcap.org then it will work
Last updated: 2024-08-16

Post by andreiot40 on Step motor ECT60 Ethercat in codesys 3.5 ^{CODESYS Forge talk (Post)}
Thank you so much ! It works, I have communication.
Last updated: 2024-08-17

Post by eschwellinger on EThercat Dynamic configuration ^{CODESYS Forge talk (Post)}
start point for doing this is for sure this example here: https://content.helpme-codesys.com/en/libs/EtherCATStack/Current/EtherCATStack/pou-ETCMasterStack/DynamicConfig/fld-DynamicConfig.html
Last updated: 2024-10-16

Post by trycyclepower on How to transfer data from DINT to Union(16 Bools) which I need to use in Few FBs ^{CODESYS Forge talk (Post)}
I have DINT data from drive input and would like to use this data in Bools in bunch of the FBs. I have tried using Union but it is not working. Please suggest
Last updated: 2023-12-14

Post by transmin01 on EtherCat Master cannot open network adaptor on Win10x64 target ^{CODESYS Forge talk (Post)}
Hi, If I utilise an EtherCat master with a Beckhoff EK1100 coupler on a Win10x64 target I get a "Network Adaptor could not be opened" error. I have tried this on both a VM and a physical PC. Has anyone experienced this issue? Regards Trevor
Last updated: 2023-09-14

Post by transmin01 on SafetyApp - Exchange 8 bits from EtherCAT Safety Module to PLC mapping issue ^{CODESYS Forge talk (Post)}
Hi, I am using an "Exchange 8 bits from EtherCAT Safety Module to PLC" module which allows me to create tags in the safety environment, but how does this map to the standard PLC program? There is no entry in the IoConfig_Globals variables list. Regards Trevor
Last updated: 2023-09-27

Post by strannik on Estun servo with codesys ^{CODESYS Forge talk (Post)}
Hello dear colleagues. I have an ESTUN PRONET servo. I'm trying to control via softmotion over the CANopen bus. There is no Ethercat bus in this servo model. In another project,using Ethercat , I controlled four axes. I have problems with ESTUN PRONET servos. A DSP-402 driver mismatch is likely. I would be very grateful for your help in solving this problem.
Last updated: 2024-03-10

Post by felipemsgarcia on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Hello Edwin, Thank you foryour answer but, I believe I was not very clear in my question, sorry. What I wanted to know is if there is a generic EtherCAT slave object already in CODESYS that I can use for anything, remote IO, Drives, VFD's and so on, as long as I match PDO's. Is there such an object? Thank you again!
Last updated: 2024-05-16

Post by felipemsgarcia on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Hello, Without much info, I would assume that this is an optional object on the EtherCAT network and it's either disconnected or the address doesn't match. I would look into the devices manual or contact the manufacturer for further assistance. And, I would have posted a new topic instead of using a non related one... Cheers!
Last updated: 2024-05-16

Post by xiaoyan on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Hello Well i need some basic advice. My protegoD drive is shown deactivated in the device tree. i can see its variables and other i/o in online mode but the device itself is deactivated. how can i address this issue. is there any configuration error.using ethercat link to connect to protegoD by Primo MC plc
Last updated: 2024-05-16

Post by installwhat on C0077 on one machine but not another ^{CODESYS Forge talk (Post)}
It doesn't load differently codesys seems to be behaving differently. Original version of ethercat master in project archive is 3.5.15.50, compiler is 16.4 as is codesys I'm using. It builds fine in vm and not on local machine. The reason is not obvious. It builds on local machine with ethercat master at 3.5.16.0. I'd really appreciate advice
Last updated: 2024-06-11

Post by thieulam on Codesys access to DICTIONARY OBJECTS of ethercat (CoE ) Servo Drive ^{CODESYS Forge talk (Post)}
Hello to all! How can I read or write, via my main code (ST), to the registers present in the DO of my ethercat CoE servo drive? These objects appear in the list of the INITIALIZATION page, and from here I can only access them at startup. How do I access it in run time from my main PLC_PROGRAM?
Last updated: 2024-06-19

Post by felipemsgarcia on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Hello all, I still couldn't find the answer. I wanted to know is if there is a generic EtherCAT slave object already in CODESYS that I can use for anything, remote IO, Drives, VFD's and so on, as long as I match PDO's. Is there such an object? Thank you!
Last updated: 2024-06-20

Post by soped on How to generate EtherCat xml from command line ^{CODESYS Forge talk (Post)}
Hi Under tools->customize I have added the command "Generate ethercat xml" to my project so that I can export the configuration as an xml file. I can't find a way how to run that command from CLI, is that even possible and if a script is needed I would appreciate an example ?
Last updated: 2024-06-27

Post by soped on How to generate EtherCat xml from command line ^{CODESYS Forge talk (Post)}
Hi I'm using codesys 3.5 SP4 Under tools->customize I have added the command "Generate ethercat xml" to my project so that I can export the configuration as an xml file. I can't find a way how to run that command from CLI, is that even possible and if a script is needed I would appreciate an example ?
Last updated: 2024-06-27

Sort by relevance or date