how to convert library from CodeSys 2.3 to CodeSys 3.x ? ^{CODESYS Forge talk (Thread)}
how to convert library from CodeSys 2.3 to CodeSys 3.x ?
Last updated: 2026-04-29

CodeSys OPC UA client Unable to Connect To OPC UA sever through Username and password ^{CODESYS Forge talk (Thread)}
CodeSys OPC UA client Unable to Connect To OPC UA sever through Username and password
Last updated: 2026-05-07

Two licenses have to be installed forgot to enable one license ^{CODESYS Forge talk (Thread)}
Two licenses have to be installed forgot to enable one license
Last updated: 2026-02-03

Post by alexgooi on Codesys KNX implementation ^{CODESYS Forge talk (Post)}
Dear forum, We are currently doing some research on the Codesys KNX implementation (https://store.codesys.com/en/codesys-knx-sl.html). We almost have it working but we are missing the last part. The setup: We have a Codesys virtual control container running on docker (4.17.0.0), the I/O is running over an Ethernet IP coupler (Weidmüller), and this is running fine. As far as I’m concerned this tells me that the ethernet device is working properly (the container has access to the outside world, including multicast). Underneath this ethernet adapter the KNX module is added (see picture). In the KNX device (Codesys) 2 input variables are added (see picture), and these are exported to ETS (ETS 5). In ETS A Codesys KNX device has been imported and the Codesys export was imported, afterwards the group addresses are attached to the variables (see picture). Afterwards this configuration is downloaded to the Codesys controller (Container) via ETS. ETS asks for the pressing of the programming button, when the virtual programming button is pressed the download starts and finishes without any errors. This tells me that ETS is communicating with the Codesys controller, and that the download process is ok (so far so good). Now the part where we are struggling with, somehow we need to convert the KNX TP to KNX IP. For this we have the following interface: Zenio KIPI SC (https://www.zennio.com/product/kipi-sc/) this is a KNX TP to IP interface. We have the following setup for this device (see picture) (an IP in the same subnet is used). We tried multiple combinations of IP addresses but the TP devices are simply not communicating to the Codesys container. Does anyone has any advice on what to try next. To make the question more explicit how can we link the TP bus to the Codesys device? Kind Regards Alex
Last updated: 2026-01-05

Import RsLogix 5000 project to Codesys ^{CODESYS Forge talk (Thread)}
Import RsLogix 5000 project to Codesys
Last updated: 2023-09-07

IMAGE DISPLAY ACCORDING TO INPUT VARIABLE ^{CODESYS Forge talk (Thread)}
IMAGE DISPLAY ACCORDING TO INPUT VARIABLE
Last updated: 2023-09-12

Retain memory change to ZERO ^{CODESYS Forge talk (Thread)}
Retain memory change to ZERO
Last updated: 2023-09-19

Fail to download missing libraries ^{CODESYS Forge talk (Thread)}
Fail to download missing libraries
Last updated: 2021-11-12

Moved To: Control double acting valve ^{CODESYS Forge talk (Thread)}
Moved To: Control double acting valve
Last updated: 2016-10-18

How to configure OPC-UA server ^{CODESYS Forge talk (Thread)}
How to configure OPC-UA server
Last updated: 2018-12-03

SoftMotion interface to analog axes ^{CODESYS Forge talk (Thread)}
SoftMotion interface to analog axes
Last updated: 2016-12-08

Lock usb port to a device ^{CODESYS Forge talk (Thread)}
Lock usb port to a device
Last updated: 2017-06-07

Device descriptor: how to create... ^{CODESYS Forge talk (Thread)}
Device descriptor: how to create...
Last updated: 2018-09-12

RFC2217 Serial to Ethernet devices ^{CODESYS Forge talk (Thread)}
RFC2217 Serial to Ethernet devices
Last updated: 2017-08-03

Login-to-PLC problems ^{CODESYS Forge talk (Thread)}
Login-to-PLC problems
Last updated: 2016-09-21

Raspberry Pi to Codesys 2.3 ^{CODESYS Forge talk (Thread)}
Raspberry Pi to Codesys 2.3
Last updated: 2014-01-29

modbus from serial to tcp ^{CODESYS Forge talk (Thread)}
modbus from serial to tcp
Last updated: 2017-06-05

Logging to a SoftPLC remotely? ^{CODESYS Forge talk (Thread)}
Logging to a SoftPLC remotely?
Last updated: 2020-10-02

LoadFile - delete button goes to exception ^{CODESYS Forge talk (Thread)}
LoadFile - delete button goes to exception
Last updated: 2018-11-23

Unable to import device description error ^{CODESYS Forge talk (Thread)}
Unable to import device description error
Last updated: 2021-07-29

How to get object attributes ^{CODESYS Forge talk (Thread)}
How to get object attributes
Last updated: 2018-01-30

PFC200 Update to 4.9.0.0 - No Connection ^{CODESYS Forge talk (Thread)}
PFC200 Update to 4.9.0.0 - No Connection
Last updated: 2023-09-27

PFC200 Update to 4.9.0.0 - No Connection ^{CODESYS Forge talk (Thread)}
PFC200 Update to 4.9.0.0 - No Connection
Last updated: 2023-09-28

eCockpit - unable to start simulation ^{CODESYS Forge talk (Thread)}
eCockpit - unable to start simulation
Last updated: 2023-10-20

User Management - REFERENCE TO VisuUserMgmtProvider ^{CODESYS Forge talk (Thread)}
User Management - REFERENCE TO VisuUserMgmtProvider
Last updated: 2023-11-17

Sort by relevance or date