Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
It doesnt see the dongel on my computer
Last updated: 2024-04-11

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
please write to 'my question' in the CODESYS store.
Last updated: 2024-04-16

Post by valenting on Can't use new licensing with Raspberry Pi ^{CODESYS Forge talk (Post)}
Thank you, it worked
Last updated: 2024-04-22

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
Also funnie. Codeys is a Leading Hardware-"INDEPENDENT"
Last updated: 2024-05-01

Post by eschwellinger on Toradex and CODESYS and licensing ^{CODESYS Forge talk (Post)}
yes, need to be plugged.
Last updated: 2025-10-21

Post by nguyenkhoi on Ethercat Servo Setup ^{CODESYS Forge talk (Post)}
You can buy a license on the store!
Last updated: 2026-01-10

Post by winki on Error in licence activation ^{CODESYS Forge talk (Post)}
Hello, Despite receiving an activation message after entering the license number, I don’t have any license installed on my gateway. I went to check in /var/opt/codesys/ and there is no License file. I searched the entire gateway for a .lic file and found no license. I’m really stuck—how can I fix this, please? When I am using the licence tools I got this picture: But nothing that have been activated. Loic,
Last updated: 2026-02-03

Post by winki on Error in licence activation ^{CODESYS Forge talk (Post)}
Hello, Despite receiving an activation message after entering the license number, I don’t have any license installed on my gateway. I went to check in /var/opt/codesys/ and there is no License file. I searched the entire gateway for a .lic file and found no license. I’m really stuck—how can I fix this, please? When I am using the licence tools I got this picture: But nothing that have been activated. Loic,
Last updated: 2026-02-03

Post by timvh on Licensing info not available. ^{CODESYS Forge talk (Post)}
In the VPLC configuration settings there is an entry for the IP address of the license server. In this setting fill in the IP address of your device (host IP address). Then when the virtual PLC starts up, it will get the license from the license container on the host. You can do this for all VPLC's running on your device. The VPLC will always take the smallest license which fits the required license. So if you have 2 licenses for VPLC's with small and large applications, then this will work fine if you start up one VPLC which requires the small license and the other which requires the large license. PS, personally I find it much easier, especially for testing and experimenting, to activate the licenses on a CODESYS (USB) key. This is easy to activate (on your development PC) and easier to move to another device. Addtionally you don't loose the license when you need to install a completely new image on the device.
Last updated: 2025-10-02

Post by nearow on TargetVisu not accepting touch inputs ^{CODESYS Forge talk (Post)}
Good day, Currently running a project on a windows 10 IPC with TargetVisu. the project starts and runs but the TargetVisu screens will not accept a touch on the monitor but will work with a mouse. I have the option to use as a touchscreen active. I did not put my license on the device just yet. Do you have to have the license activated on the device before the TargetVisu will work via a touch? running Codesys v3.5 SP 19 Patch 6, 64bit. device is Codesys Control Win v3 X64
Last updated: 2024-02-14

Post by jonasz on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
The machine I'm currently using (Celeron J1900) already has the Kernel RT patch. I checked the performance according to the documentation. After running CyclicTest for 4 cores, the value for each core is around 6-7. I went through the entire process according to the documentation (I envy the TaskMonitor results in the documentation). The documentation states: "CODESYS Virtual Safe Time Provider The CODESYS Virtual Safe Time Provider is a standard interface that the user can use to transfer a second and external time base to the CODESYS Virtual Safe Control. The implementation is done as a client, which must run on another system with an independent time base." How do I implement this? I've been struggling for two weeks now - I'm too old to give up.
Last updated: 2025-11-17

I want to control a industrial machine with "CODESYS Control Win V3" and a Profibus_DP slave ^{CODESYS Forge talk (Thread)}
I want to control a industrial machine with "CODESYS Control Win V3" and a Profibus_DP slave
Last updated: 2018-09-24

Difference between CODESYS Control RTE x64 and CODESYS Control RTE V3 x64 ^{CODESYS Forge talk (Thread)}
Difference between CODESYS Control RTE x64 and CODESYS Control RTE V3 x64
Last updated: 2021-05-10

Post by erictur on CODESYS Control for Linux ARM SL (32 bit) on Moxa UC-3100 IPC ^{CODESYS Forge talk (Post)}
UC3100 comes with Arm Cortex-A8 1 GHz and belongs to Moxa Industrial Linux 1 (Debian 9) for Arm-based Computers. I tried to install the CODESYS Control for Linux ARM SL (32 bit) on Moxa UC-3100 IPC. Unfortunately, the Third-party requirements: - libc >= 2.27 (required by CodeMeter Runtime) of the CODESYS Control for Linux ARM SL cannot be met on the Debian 9, which comes with glibc 2.24. I read the post by @johnlee (Getting Start with Codesys Control for Linux SL) (https://forge.codesys.com/forge/talk/Runtime/thread/0a515ced3f/). Where he discusses installation of CODESYS Control for Linux ARM SL on Debian 9. There was CODESYS Linux runtime v3.5.14 availble and it was successfully intalled on the Debian 9. However, the CODESYS Store has the oldest version V4.1.0.0 32 bit available. There is no way to find the CODESYS Linux runtime v3.5.14. So is there any work around for this? Or I cannot install the CODESYS Runtime on any of the Moxa IPCs based on the Moxa Industrial Linux 1 (Debian 9)?
Last updated: 2025-07-10

Post by jeindhoven on Deploying to raspberry pi 5 hangs ^{CODESYS Forge talk (Post)}
Hi CoDeSys support forum, hope that this is the correct place to ask this. Might be double as i am new to Codesys and dont know all terminology. I am trying to test Codesys with a virtual plc on a raspberry pi 5. Already figured that i need Tools -> Deploy Control SL, enter Communication parameters. Codesys says "Connected". Then tab "Deployment", there i select "CODESYS Control for Raspberri Pi SL" and "4.16.0.0 (all)". Click "Install" and the gui turns grey and unresponsive. The titlebar says "Untitled1.project - CODESYS (Not Responding)" as well. Restarting Codesys and checking shows no package was installed. How to deploy the runtime? Thank you in advance for your time. Edit: After some patience, an error showed up: "Error when sending ssh heartbeat: Session operation has timed out" "Error installing codesyscontrol" Any pointers to what remote command might have failed, or log of some sort, would be welcome. Software versions: Codesys version 3.5.21.10 Raspberry pi 5 (deployment machine): $ uname -a Linux raspberrypi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye $ apt list --installed | grep openssh-server openssh-server/oldstable,now 1:8.4p1-5+deb11u3 arm64 Development machine: $ uname -a Linux 2B 6.1.0-35-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.137-1 (2025-05-07) x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 12 (bookworm) Release: 12 Codename: bookworm VirtualBox Version 7.0.26 r168464 (Qt5.15.8) Virtual OS: Windows 10 Pro 64-bit (10.0, Build 19045) .NET version 4.0.30319.42000
Last updated: 2025-06-22

Start Control Win Softmotion Runtime ^{CODESYS Forge talk (Thread)}
Start Control Win Softmotion Runtime
Last updated: 2023-08-23

Moved To: Control double acting valve ^{CODESYS Forge talk (Thread)}
Moved To: Control double acting valve
Last updated: 2016-10-18

Axis control whit Softmotion question ^{CODESYS Forge talk (Thread)}
Axis control whit Softmotion question
Last updated: 2019-08-08

IO-Karten für Control Win ^{CODESYS Forge talk (Thread)}
IO-Karten für Control Win
Last updated: 2016-01-19

Python script command for "Access Control" ^{CODESYS Forge talk (Thread)}
Python script command for "Access Control"
Last updated: 2024-07-18

Codesys + BeagleBone PLC +LED control ^{CODESYS Forge talk (Thread)}
Codesys + BeagleBone PLC +LED control
Last updated: 2024-08-12

Codesys Virtual Control - startup problem ^{CODESYS Forge talk (Thread)}
Codesys Virtual Control - startup problem
Last updated: 2024-08-19

control loop library IIR filter ^{CODESYS Forge talk (Thread)}
control loop library IIR filter
Last updated: 2025-08-01

Cursor to move to a control ^{CODESYS Forge talk (Thread)}
Cursor to move to a control
Last updated: 2025-08-12

Control for Raspberry Pi 4.17 ^{CODESYS Forge talk (Thread)}
Control for Raspberry Pi 4.17
Last updated: 2025-09-08

Sort by relevance or date