Post by sigbjorn-kleppe on How to display only legend description and not variable name ^{CODESYS Forge talk (Post)}
Hello, I have a question regarding the Trend and LegendDisplayer visualization elements. As the provided image suggests, I am trending two variables which show the torque of two motors in terms of % of max load. Below the trend element, is the LegendDisplayer element which correctly displays the name of both trends. But also, it displays the actual variable name in parenthesis, which I do not want. Currently, the name is set by entering a description for each variable in the trend recording settings. But I can't seem to find any option to display only this description. Is it possible to only remove the variable name used in the software? I'm using CODESYS 3.5.21.50. Thanks in advance!
Last updated: 2026-09-23

Post by sigbjorn-kleppe on How to display only legend description and not variable name ^{CODESYS Forge talk (Post)}
Hello, I have a question regarding the Trend and LegendDisplayer visualization elements. As the provided image suggests, I am trending two variables which show the torque of two motors in terms of % of max load. Below the trend element, is the LegendDisplayer element which correctly displays the name of both trends. But also, it displays the actual variable name in parenthesis, which I do not want. Currently, the name is set by entering a description for each variable in the trend recording settings. But I can't seem to find any option to display only this description. Is it possible to only remove the variable name used in the software? I'm using CODESYS 3.5.21.50. Thanks in advance!
Last updated: 2026-09-23

Post by pernockham on How to recognize licenses SMALL, MEDIUM, LARGE by CmpCodemeter ^{CODESYS Forge talk (Post)}
I think google has fooled me here, the only thing I can conclude so far is what i now from reading the licenseManager, which tells me that my valid license have the following product-code CONTROL - 16#3000 VISU - 16#3003, feature map: 1000 COM - 16#3004, feature map: 0200 Will different level of license give different product codes or will I see the active license level by other means? What I am trying to achieve is block Starting a machine with time limited operation should the application be larger than what the license permits (DEMO-mode). And give this information to the user by an alarm/information.
Last updated: 5 days ago

Post by ranadheer on Assistance for MQTT configure with external broker (Mosquitto) ^{CODESYS Forge talk (Post)}
Hi everyone Am trying to make establish MQTT connection , where am using IIOT example for this as a demo mode. where i had given IP-address of of local Linux application as a 172.31.239.67 and port number as 1883 in the PLC_PRG itself, and preparing the publish message by manually as " this is from published message", and this should receive at the subscriber side. Aim: To make communicate external publisher to the CODESYS by using MQTT protocol. By any chance having reference documents about this implementation please share here. and suggest the process to make it possible. I had uploaded reference project file after updating address in th PLG_PRG, kindly assist to configure with the broker
Last updated: 2025-12-03

Post by reinier-geers on wEBCLIENT Post data api ^{CODESYS Forge talk (Post)}
Ive got the webclient axample. If i put https://reversed.notion.site/Marktprijzen-API-89ce600a88ac4abe8c2ad89d3167a83e example to https://reqbin.com/post-online then i get data. If i do the same in Webclient example i get " not a valid graphql request. Why ? sUrl := 'https://graphql.frankenergie.nl/' Request_type_post Contenttype = 1 (json ) Postvalue := '{"query":{"query":"query MarketPrices {\n marketPrices(date:\"2025-12-25\") {\n electricityPrices {\n from\n till\n marketPrice\n marketPriceTax\n sourcingMarkupPrice\n energyTaxPrice\n perUnit\n }\n gasPrices {\n from\n till\n marketPrice\n marketPriceTax\n sourcingMarkupPrice\n energyTaxPrice\n perUnit\n }\n }\n}' I tranfer the postvalue from String to WSTRING
Last updated: 2025-12-25

Post by remlab on WebClient result empty ^{CODESYS Forge talk (Post)}
Hello, I try to read into a IPX800v4 (this is a PLC for domotic application) with a WebClient fonction I use as url http://192.168.0.250:50543/api/xdevices.json?key=XXX&Get=C XXX is replace by the correct key for sure The status code is 200, it should works correctly But the result is '{' that's my problem When I try the same url with a web browser the result is correct like { "product": "IPX800_V4", "status": "Success", "C1": 16, "C2": 2, "C3": 0, "C4": 0, "C5": 0, "C6": 0, "C7": 0, "C8": 0, "C9": 0, "C10": 0, "C11": 0, "C12": 0, "C13": 0, "C14": 0, "C15": 0, "C16": 0 } When i replace the url by a web site like google for exemple it works Can you help me please ?
Last updated: 2026-03-04

Post by egau on Importing a library overrides parameters of a referenced library ^{CODESYS Forge talk (Post)}
Hi, In my CODESYS project (ABC.project), I’m using the MQTT library. I’ve also created a separate library (DEF.library) which itself references the MQTT library. In ABC.project, I’ve customized some MQTT parameters—for example, setting g_udiMaxPublishersAndSubscribers to 100 instead of the default value of 20. However, when I import DEF.library into ABC.project, the MQTT parameters get reset to their default values. I assume this happens because DEF.library still uses the default MQTT configuration, which then overrides my project settings. A straightforward workaround would be to manually align the parameter values in DEF.library, but that doesn’t feel like the right approach. Is there a better or recommended way to handle this situation? I'm using SP18 Patch3. Any insights would be greatly appreciated. Thanks in advance!
Last updated: 2026-05-04

Post by baotthitawat on Why Structured SCADA Documentation Matters in Modern Industrial Systems ^{CODESYS Forge talk (Post)}
Modern SCADA development is no longer limited to monitoring dashboards and PLC communication. Today’s industrial systems often require: Cloud architecture Web & mobile SCADA API integration IIoT communication Alarm management Scalable deployment workflows One challenge in many projects is that deployment knowledge is usually scattered across multiple documents, configuration guides, and troubleshooting references. As systems become more connected, engineers need a more structured learning approach to reduce deployment time and improve maintainability. The ATSCADA Training Book is an interesting example because it organizes the ecosystem into a clearer roadmap covering: SCADA architecture Driver & OPC communication Web visualization Mobile applications Cloud & IIoT systems Troubleshooting & maintenance I think structured technical documentation will become increasingly important as industrial automation systems continue evolving toward larger and more connected environments.
Last updated: 2026-05-27

Post by baotthitawat on SCADA Systems Are Becoming Easier to Integrate With Modern Applications ^{CODESYS Forge talk (Post)}
One thing I’ve been seeing recently is that more industrial systems are starting to expose realtime SCADA data through APIs instead of keeping everything isolated inside the local monitoring software. This makes integration much easier for cloud platforms, mobile dashboards, AI analytics, and enterprise applications that need realtime industrial data. Instead of exporting reports manually or building complicated middleware, APIs allow external systems to access SCADA data directly in realtime. I think this becomes especially useful for applications like wastewater treatment monitoring, where operators need better visibility into alarms, equipment status, and operational conditions across different locations. Feels like modern SCADA is slowly evolving from a standalone monitoring platform into part of a larger connected industrial ecosystem.
Last updated: 2026-05-28

Post by baotthitawat on SCADA Systems Are Becoming Easier to Integrate With Modern Applications ^{CODESYS Forge talk (Post)}
One thing I’ve been seeing recently is that more industrial systems are starting to expose realtime SCADA data through APIs instead of keeping everything isolated inside the local monitoring software. This makes integration much easier for cloud platforms, mobile dashboards, AI analytics, and enterprise applications that need realtime industrial data. Instead of exporting reports manually or building complicated middleware, APIs allow external systems to access SCADA data directly in realtime. I think this becomes especially useful for applications like wastewater treatment monitoring, where operators need better visibility into alarms, equipment status, and operational conditions across different locations. Feels like modern SCADA is slowly evolving from a standalone monitoring platform into part of a larger connected industrial ecosystem.
Last updated: 2026-05-28

Post by baotthitawat on SCADA Systems Are Becoming Easier to Integrate With Modern Applications ^{CODESYS Forge talk (Post)}
One thing I’ve been seeing recently is that more industrial systems are starting to expose realtime SCADA data through APIs instead of keeping everything isolated inside the local monitoring software. This makes integration much easier for cloud platforms, mobile dashboards, AI analytics, and enterprise applications that need realtime industrial data. Instead of exporting reports manually or building complicated middleware, APIs allow external systems to access SCADA data directly in realtime. I think this becomes especially useful for applications like wastewater treatment monitoring, where operators need better visibility into alarms, equipment status, and operational conditions across different locations. Feels like modern SCADA is slowly evolving from a standalone monitoring platform into part of a larger connected industrial ecosystem.
Last updated: 2026-05-28

Post by hluecke on Codesys Virtual Safe Control startet nicht (mehr) ^{CODESYS Forge talk (Post)}
Hallo, ich versuche seit einiger Zeit eine virtuelle Codesys Control für Linux in Verbindung mit einer Virtual Safe Control ans Laufen zu bringen. Seit zwei Tagen, ohne dass eine Änderung gemacht wurde (auch keine Betriebssystem Updates), startet die Safe Control gar nicht mehr und ich erhalte die Fehlermeldung "Eine Ausnahme vom Typ "CODESYS.VirtualPlcCommunicator.VirtualApiException" wurde ausgelöst". Wenn man in den Operationen die VPLC manuell startet, wird sie als laufend angezeigt, bis man aktualisiert. Ich habe die Packages schon neu installiert und auf die aktuellste Version upgedated, keine Änderung. Ein Log lässt sich nicht abrufen. Hat jemand Erfahrung, was dieser Fehler bedeutet und wie man ihn beheben kann?
Last updated: 2026-09-01

Post by timvh on EXCEPTION [watchdog] how to find position cause ^{CODESYS Forge talk (Post)}
Monitor what your current cycle time is (in the Task Configuration when you are online). If this is sometimes close to 200ms, then change your code (e.g. limit the loops, or prevent copying a lot of data between objects). Or just set the Watchdog time (or sensitivity) higher if you don't care that it sometimes takes longer than 200ms. If you want to find out which objects in your application consume the most time, then buy a PDE (Professional Developer Edition) license. With this you get a license for the Profiler. This can help you a lot to find the root cause, because it will create a nice overview of all objects, their calls and the time (percentage) it takes to execute it.
Last updated: 2026-02-09

Post by konstantin on Lenze i950 Servo and WAGO PFC200 ^{CODESYS Forge talk (Post)}
Hello, basically the i950 drive support CiA402 Basic and CiA402 Advanced modes. I attached pictures of both mode supported functions. It also support CSP, VL, CSV and CST modes. It seems the homing mode is in CiA402 Advanced mode but how can you not have the homing mode in both modes? It is a vital part of any servo system. If I use the SoftMotion standard demo mode, I can move the servo absolute and relative but cannot home it. But in SoftMotion Light mode, I cannot execute any motion function. Here is the official manual for i950 servo drive - i950 Documentation Best Regards Konstantin Kolev
Last updated: 2026-02-13

Post by pernockham on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
And the strange thing for me is that if i connect with an older IDE version (where I only have 4.17.0.0 installed) I can see both "CODESYS Control for Linux SL" and "CODESYS Edge Gateway for linux". And that I loose (both presence and possibility to update) the first option (Control SL) if i let the updater install "Control for linux SL" vers. 4.18.0.0 or later. (Note that runtime 4.17.0.0 is installed and it is running and I can login to that system, but no apparent option available to update it to 4.19.0.0). Attached print screen where I connected the "deploy sl tool" to the same system, where the upper (IDE) one has 4.19.0.0 installed, while the lower one has 4.17.0.0 installed..
Last updated: 2026-02-17

Post by yannickasselin on Question about Demo License limitations for Modbus TCP communication and Fieldbus Instances ^{CODESYS Forge talk (Post)}
As far as I know, there is no other limitations than the 2 hours limit. The demo mode should be plenty enough for testing purposes. Regarding instances. In the device tree, 1 master = 1 instance, no matter how many slaves the master is communicating with. But it is also possible that your Codesys runtime act as a slave. In this case, each slave in the device tree is one instance. You can also use the license metric tool in the IDE. This will tell you exactly how many instances you have in your project. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_edt_device_licensed_software_metrics.html
Last updated: 2026-02-28

Post by gordonkeller360 on Escape character behavior for hex values in string -- what gives? ^{CODESYS Forge talk (Post)}
I have a program which sequentially places byte representations of characters from a string into an array. FUNCTION_BLOCK MoveBytesFromString VAR_IN_OUT abRxBuf: ARRAY [0..79] OF BYTE; END_VAR VAR testString : STRING := '$0A$R$L$TTesting,123...$94$86$0A'; iCount: DINT; END_VAR ---------------------------------------------------------------------------------------- // clear the buffer MEM.MemFill(ADR(abRxBuf), 80, 0); FOR iCount := 0 TO LEN(testString) - 1 DO // account for undesired null terminator of string abRxBuf[iCount] := testString[iCount]; END_FOR Escaped characters, like $T, $N, etc. work just fine, and so do their hex representation counterparts ($09, $0A, etc). However, when I put something like $94, I get a set of nonsense values... see image attached after one spin of the program. Could someone explain to me what is happening here? I'll continue to investigate...
Last updated: 2026-03-09

Post by dat422 on CODESYS crashes when adding standard OPC UA Information Model to Communication Manager ^{CODESYS Forge talk (Post)}
Hi all, I am experiencing a problem when trying to add a standard OPC UA Information Model to the Communication Manager. When I try to add the following standard information models to a new or existing project http://opcfoundation.org/UA (15.07.2020) http://opcfoundation.org/UA/DI (02.06.2020) CODESYS crashes every time during the process. Adding an OPC UA Server itself works without any problem. The crash only happens when adding the standard OPC UA Information Model. CODESYS version: CODESYS V3.5 SP20 Patch 4 (64 bit) Has anyone experienced the same issue or knows a possible workaround? Thank you in advance.
Last updated: 2026-03-19

Post by husarz17 on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
My codesys is 3.5.21.30. I am using function ModbusServer from library ModbusTCP_Slave. The reason is that I need share 9000 Holding registers. By standard configuration it is only 4096. fbMbTcpDevice: ModbusTCP_Slave.ModbusServer; fbMbTcpDevice( wPort := 502, pInputData := ADR(awInputReg), pOutputData := ADR(awHoldingReg), uiInputDataSize := 10, uiOutputDataSize := 9000, xEnable := TRUE, tTimeout := 10000, InterfaceName := "eth0", xBusy => xBusy, xError => xError, byClientConnections => byConnections ); Ethernet port is cofigured: Network interface: eth0 IP address: 10.10.22.55 Subnet maskL 255.255.255.0 Default gateway: 0.0.0.0 And it only works when I am reading registers with ID 255 by Modbus Poll. Any other IDs don't work. The actual TCP client device try to read registers with ID 1 and I can't change it... Thanks in advance for your help!
Last updated: 2026-04-01

Post by rik123456 on Alarmmanagement – Dynamic Alarm List ^{CODESYS Forge talk (Post)}
Hi, I had a question about alarm management in the CODESYS visualization. I am currently investigating to what extent the alarm visualization can be built dynamically. In my program, I have developed a motor block that is used for multiple motors. When the emergency stop of one or more motors is activated, the corresponding motors are displayed in the alarm list (see image). This works quite well. I achieved this by linking variables to a latch, after which a piece of code displays the motors that are in emergency stop. My question is: do I need to create a separate latch for each motor or can I use a single latch to display multiple alarms of a motor underneath each other? This would then look like this: Time…: M1 Emergency Stop Active Time…: M4 Emergency Stop Active
Last updated: 2026-04-20

Post by cvrettacos-dse on How to reset scroll of a table element ^{CODESYS Forge talk (Post)}
Hello, I would like to use swipe/pan gestures to scroll a table visualization element (CODESYS 3.5.21.10) ona DSE M810 display. The swipe / pan gesture control works fine, however, I cannot figure out how to reset / navigate to the top of the table again with code. I have tried the Scrolling begin variable, and the visu manager is setting it to FALSE right away but the table doesn't actually scroll back to top. If I check the “Scroll elements with scrollbar” box, then the Scrolling begin variable works perfectly, but now the swipe/pan scrolling no longer works and you have to use the scrollbar. Any assitence you can provide is appreciated. Thanks.
Last updated: 2026-04-21

Post by alexgooi on Network variable stops sending ^{CODESYS Forge talk (Post)}
Hi Reinier, What usually works for me is settings it up in the following way: In the sender block make sure that the list identifier is unique for the whole installation (this is only relevant when you have multiple senders in 1 network). When you are linking the NVL to a file make sure that the path to this file doesn't change. In my experience the NVL stops working when you change the working directory and afterwards open the NVL in de Codesys IDE. If this doesn’t apply to you application, you could also try to change the port number, maybe there is an other process making use of port 1202. Kind regards Alex
Last updated: 2026-04-22

Post by timvh on library inside library ^{CODESYS Forge talk (Post)}
1) it should be possible to access the type SysTime in the project as A_Lib.SysTime. 2) you could add the SysTimeCore library to the library manager of your library (POU Pool). This might seem as a double library, but because of the placeholder resolution only one will be used. Then, in your library manager of your library, select the SysTimeCore library, right-click, select "Properties" and enable the option "Publish all IEC symbols ...." For more information about library development, you could follow our advanced training course in Ridderkerk. The next is scheduled for 24 and 25 June 2026 https://www.extendsmartcoding.nl/codesys-training/
Last updated: 2026-04-25

Post by polo on 1 Wire und i2c zeitgleich in Betrieb ^{CODESYS Forge talk (Post)}
Hallo zusammen, ich habe schon einige Zeit 16 DS18B20 am 1 Wire laufen ... auch die ganze Zeit stabil ... jetzt habe ich ein PWM Signal über i2c für eine Pumpenansteuerung zusätzlich in Betrieb genommen.. nur das Signal für die Pumpe geht über i2C ... 100Hz 10ms. Es läuft auch alles soweit ... nur fallen mir jetzt die Temperaturen in Abständen aus ... Vertragen sich die beiden Systeme zeitlich evtl. nicht so gut ... 1 wire extra task mit 200ms Prio 0 i2c task 10ms ... damit die 100Hz auch übertragen werden Prio 1 (Adafruit_PWM) Main Task 20ms Prio 5 Oder jetzt besser beides über i2c abrufen ... ist aber dann evtl. für die DS18B20 zu schnell ? Oder sind die 5V vom Pi jetzt zu schwach für beide Signale? Vielen Dank euch
Last updated: 2026-04-27

Post by baotthitawat on SCADA Systems Are Becoming Easier to Integrate With Modern Applications ^{CODESYS Forge talk (Post)}
One thing I’ve been seeing recently is that more industrial systems are starting to expose realtime SCADA data through APIs instead of keeping everything isolated inside the local monitoring software. This makes integration much easier for cloud platforms, mobile dashboards, AI analytics, and enterprise applications that need realtime industrial data. Instead of exporting reports manually or building complicated middleware, APIs allow external systems to access SCADA data directly in realtime. I think this becomes especially useful for applications like wastewater treatment monitoring, where operators need better visibility into alarms, equipment status, and operational conditions across different locations. Feels like modern SCADA is slowly evolving from a standalone monitoring platform into part of a larger connected industrial ecosystem.
Last updated: 2026-05-28

Sort by relevance or date