Post by timvh on Add licence ^{CODESYS Forge talk (Post)}
The Epis controller should support the CodeMeter driver to be able to access the license containers on the CODESYS Key.
Last updated: 2024-01-14

Post by iliyatsukerman on SoftMotion auf PFC200 ^{CODESYS Forge talk (Post)}
Hallo, Wir würden Ihre Unterstützung bei der Überprüfung der Kompatibilität der folgenden Konfiguration sehr schätzen: • PSTR-LO-16/400FEV ELMO • SCALANCE XC208 • WAGO PFC200 750-8213/40-010 • Die SPS (WAGO) wird gleichzeitig eingesetzt als: o EtherCAT-Master zur Kommunikation mit einem Elmo-Servoantrieb (EtherCAT-Slave, 4 Achsen – generisches CiA 402-Profil), und o Modbus-TCP-Server zur Kommunikation mit einem Siemens Modbus-TCP-Client, welcher zur Fernsteuerung des Elmo-Servoantriebs über die SPS dient. Bitte bestätigen Sie, ob die SPS in der Lage ist, diese Dualfunktion — als EtherCAT-Master und gleichzeitig als Modbus-TCP-Server — ohne Konflikte oder Performanceprobleme zu unterstützen. Insbesondere interessiert uns, ob die CODESYS SoftMotion SL Basislizenz (2305000000-F) notwendig ist, um 4 Servoachsen zu steuern, und ob diese Lizenz auf einer WAGO PFC200 SPS mit CODESYS Version 3.5 Service Pack 19 Patch 40 oder höher unterstützt wird. Alle Achsen im Servoantrieb werden unabhängig voneinander gesteuert. Mit freundlichen Grüßen. ILIYA
Last updated: 2025-07-13

Post by amani on PN Controller auf Raspberry Pi 4 ^{CODESYS Forge talk (Post)}
Hallo zusammen, Ich mache +/- erste Schritte mit RaspberryPi und Codesys: tolle Sache! Ich habe Codesys V3.5 auf einem Raspberry Pi 4 am laufen. Ich würde damit gerne einen Profinet-Slave bedienen. Die Kommunikation läuft, nun habe ich das Problem dass ich nicht verstehe wie ich den PN-Task mit dem PLC task synchron halte: Ich muss dem Slave eine Parameter-ID übergeben und beim nächsten Zyklus die Antwort auslesen. Da es dann mehrere Parameter gibt die ich nur sequentiell auslesen kann benutze ich also einen Zähler der mir die ID's durchstept. Aktuell sieht es aus als ob dieser Zähler schneller inkrementiert als der Slave antwortet (ich habe z.Bsp. 5 Parameter, diese zeigen dann alle das gleiche oder springen zwischen den Parametern). Also kurz gesagt ich muss sicherstellen dass die Datenbytes vom Slave zur gesetzten Parameter-ID passen... Ich wäre froh um ein paar Tipps! Herzlichen Dank! Grüsse, Stephan A. Wicki
Last updated: 2025-02-26

Post by eschwellinger on Ethercat scan for devices not picking up EL7041 as a softmotion axis ^{CODESYS Forge talk (Post)}
Add existing version (with SM drive) - without scan - disable under expert settings in the slave the revision check.
Last updated: 2023-09-03

Post by arnog on Master&Slave Program in 4 Axis CNC Project ^{CODESYS Forge talk (Post)}
I am also looking for the right solution. Also saw a virtual axes would be better to steer x1 and x2
Last updated: 2023-10-01

Post by pazderai on CanOpen write issue ^{CODESYS Forge talk (Post)}
Hi,is there any canopen library where is implemented sdo write with unspecified datalength (command byte 0x22)? I tried caa cia405 canopen library but it doesnt support this, but my slave device accept only 0x22. Thank you for any help.
Last updated: 2024-07-16

Post by pazderai on CanOpen write issue ^{CODESYS Forge talk (Post)}
Hi,is there any canopen library where is implemented sdo write with unspecified datalength (command byte 0x22)? I tried caa cia405 canopen library but it doesnt support this, but my slave device accept only 0x22. Thank you for any help.
Last updated: 2024-07-16

Post by justthefacts77 on How to generate an "ENI" file ^{CODESYS Forge talk (Post)}
An ENI file is needed for a 3rd party software solution that is being used over EtherCAT connection that emulates multiple Slave devices. This one cant be that complex, seen some legacy posts but no answers. Thank you! Bruce
Last updated: 2024-08-08

Post by banialuk on CAN Open Manager - varible of SYNC ^{CODESYS Forge talk (Post)}
Hello, were I have find varaible of SYNC "Cycle Period" , or variable that informs about the start of a new cycle SYNC. I want to use this variable in program code. I need to for communication beetween Mster and slave, and send PDO informations.
Last updated: 2024-10-26

Post by banialuk on CAN Open Manager - varible of SYNC ^{CODESYS Forge talk (Post)}
Hello, were I have find varaible of SYNC "Cycle Period" , or variable that informs about the start of a new cycle SYNC. I want to use this variable in program code. I need to for communication beetween Mster and slave, and send PDO informations.
Last updated: 2024-10-26

Post by alexanderraab on EtherCAT: How to change station-alias/ Slave address ^{CODESYS Forge talk (Post)}
Hello, i have the same situation to change the Station-Alias adress online by IEC-Code. Have someone an exsample for that?
Last updated: 2025-08-13

Post by nano on Dynamic setting of the modbus tcp/ip slave ip address ^{CODESYS Forge talk (Post)}
habe a look to this faq, this should work for u https://faq.codesys.com/plugins/servlet/mobile?contentId=24510471#content/view/24510471
Last updated: 2024-02-17

Post by squiggleypuff on Can't Add New Version of Modbus TCP Master ^{CODESYS Forge talk (Post)}
Turns out Modbus was working despite the pre-compiler errors; I was reading the wrong addresses of the slave device, which was why I was seeing all 0s. Thanks for ignoring me.
Last updated: 2024-04-09

Post by nulltrace on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Hey Husarz, thanks for your Message, now i understand your Problem, also able to reproduce that. Pls. give me a Short Time to Check some stuff on this, i'll come back to this Topic with news ASAP. Greetings
Last updated: 2026-04-03

Post by nulltrace on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Hey, I also waiting for feedback from Mr. Schwellinger @eschwellinger, please send me an answer, i would appreciate it. The clue is, i know the solution, but have to check if it's allowed to share.
Last updated: 2026-04-14

Post by arundara on Variable Sync Issue In Soft Plc Redundancy ^{CODESYS Forge talk (Post)}
Hello, I was trying to create a redundancy POC for our application where we read data from few modbus tcp devices. As there is a limitaion that modbus tcp device support only for single master device, we wanted to test how the variable sync happens in redundancy mode. For that i have used the redundancy sample code added a variable "b" under a condition. What i observed was while active controller is running, if passive controller is powerup, passive controller is able to sync all the data configured for redundacny. But after that the variable data which resided under a condition is not synching from active to passive controller. I have attached the image where i have highlighter the variable. Can some help me to understand how redundacny work in codesys soft plc and if there is a solution to sync variable which are under condition, please explain the same or suggestion to achieve the same. Hardware - Raspberry Pi (2 qty) Redundancy licence used - yes in both controllers. Codesys runtime - 4.9.0.0 Codesys software version - V3.5 SP19 if i have posted this question in wrong section, please do let me know in whcih section i have to post this question.
Last updated: 2023-12-01

Post by jepl-1012 on configuration error for SM_Drive_GenericDSP402 ^{CODESYS Forge talk (Post)}
Hi All, I Am using Delta AX8 Controller And IndrDrive HCS01 With Ethercat COE (Cia402 Profile) .Communication has done properly but while i made MC_Power block on its not get enable. what is the issue can any one help me
Last updated: 2024-10-21

Post by teichhei on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Don't I need a browser on the device for web depot? Could work on the Pi but not the Wago controller. Maximum I have is SSH.
Last updated: 2025-01-08

Post by gseidel on Use MC_Home without enabling the drive for homing method 35 ^{CODESYS Forge talk (Post)}
Hi Artur, as mentioned by imdatatas, homing when not enabled is not supported in SoftMotion. If enabling before homing is not an option, an alternative might be controller based homing using MC_SetPosition. Best regards, Georg
Last updated: 2025-09-08

Post by fleaplc on CPU + EtherCAT redundancy ^{CODESYS Forge talk (Post)}
Hi all, for a new project I'm looking for a redundant controller with EtherCAT fieldbus I/O. Actually I'm using Beckhoff and it works great! but there's not a solid redundancy yet... Does someone get experience for industrial application (not raspberry) for a redundant Codesys system? If yes please share some info (CPU / OS type, bus, number of managed I/O,... and especially feeling feedback (stability, bugs, performance)... Every suggestion is kindly appreciated!! Fabrizio
Last updated: 2026-01-27

Post by timvh on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
1) Based on your first screenshot. Do NOT filter on "Phoenix". Then first select the Ethernet adapter (of CODESYS) and add this to your device. 2) Then to this Ethernet adapter add a Profinet Controller of CODESYS. 3) Then to this Profinet Controller, add your Phoenix Profinet coupler/adapter.
Last updated: 2025-09-09

Post by mehakfatima on Need Help Configuring Energy Analyzers via Modbus TCP & RTU (RS-485) in CODESYS 3.5 ^{CODESYS Forge talk (Post)}
Hello everyone, I am currently working on reading data from energy analyzers using Modbus TCP and RTU (RS-485). In my previous software, I used the following method to add slave devices (i have attached the image) and configure registers: Add the Modbus slave device. Configure the communication parameters (baud rate, parity, etc.). Define the registers and their addresses for data retrieval. Now, I am trying to achieve the same in CODESYS 3.5, but I am not sure how to configure the Modbus master, add slave devices, and set up the registers properly. If anyone has experience with Modbus TCP/RTU setup in CODESYS 3.5, I would really appreciate your guidance! A step-by-step explanation or any references/tutorials would be extremely helpful.
Last updated: 2025-03-13

Post by timvh on Communication between applications on same device/controller/runtime (Win RTE 3.5.20.20) ^{CODESYS Forge talk (Post)}
If you have a Windows system (RTE), then why not run the CODESYS HMI as separate controller. This could easily be moved to another PC if required. In the HMI you could also still use the Symbolic Var access as part of the Data Source Manager, although maybe OPC is the preferred way to make it more future proof. Or what about the Remote Target Visu. Then you can reduce the load of the main controller, while still only having to create one application including Visualization. This is now also supported for Linux systems. See: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_target_visu_for_linux.html https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_execute_remote_target_visu.html
Last updated: 2024-09-28

Post by budd7566 on Text size suddenly changed ^{CODESYS Forge talk (Post)}
Iv been working with a Deep Sea Electronics DSE840 for about 6 months. I have a development version of my program working with a state machine and a basic gui interface. I went to implement CAN and suddenly the text on the gui on the controller is much larger than before. I could flash old versions of my project and the text was the correct size, but if i renamed the project file, the text displayed would be large. The visualization in CODESYS always shows the expected size, but not the controller. I did a fresh install of CODESYS and even a new project with only one text box, I cant get the text size on the controller to match what is displayed in codesys to match. Any advice?
Last updated: 2023-12-09

CODESYS Automation Server Connector for 3.5 SP11 ^{CODESYS Forge talk (Thread)}
CODESYS Automation Server Connector for 3.5 SP11
Last updated: 2023-08-30

Sort by relevance or date