Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by schnepper on Error building Extension SDK Linux code ^{CODESYS Forge talk (Post)}
Solved: I started from a fresh project and everything worked. I had a Function Block in the project at one point and deleted it. I think Codesys doesn't fully clean up on deletes.
Last updated: 2024-04-02

Post by simonh on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
Hello, did you find the solution for the communication?Has the communication between the two been successful? if yes, can you please share me your solution since i have similar issue now. Thanks.
Last updated: 2024-04-04

Post by dawidr on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Did you manage to solve the problem with time out? I got the same issue and I've no idea what I'm doing wrong.
Last updated: 2024-04-07

Post by dawidr on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Did you manage to solve the problem with time out? I got the same issue and I've no idea what I'm doing wrong.
Last updated: 2024-04-07

Post by januar on Trend recording build error - the variable "arrTraceMgrVariablesImpl" is too large ^{CODESYS Forge talk (Post)}
Hi Adel, No, I just update all to the latest version and it is working. Kind regards, Januar
Last updated: 2024-04-10

Post by joschi2804 on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hello, I've added some additional log output. Maybe this helps in figuring out the root cause. I've turned logging and verbose mode on for the CodeMeterLin application and I get the error, that some entry is not found.
Last updated: 2024-04-11

Post by rafaelbrito on tasklokale GVL, max-stack-size, Error C0427 ^{CODESYS Forge talk (Post)}
Können Sie mir sagen, ob Sie wussten, wie Sie das Problem beheben können? Meiner Meinung nach müsste ich vielleicht die „Stackgröße“ ändern, die in früheren Versionen von CODESYS erlaubt war
Last updated: 2024-04-16

Post by installwhat on raspistepper error after install ^{CODESYS Forge talk (Post)}
to fix this I used a sp17 codesys and changed the project setting softmotion version to 4.6.2.0. I'm not sure if I should have had such difficulties but it works now.
Last updated: 2024-04-21

Post by installwhat on raspistepper error after install ^{CODESYS Forge talk (Post)}
to fix this I used a sp17 codesys and changed the project setting softmotion version to 4.6.2.0. I'm not sure if I should have had such difficulties but it works now.
Last updated: 2024-04-21

Post by stulle on 3.5 P20 hangs - no response ^{CODESYS Forge talk (Post)}
Hello everyone, I have a problem. Codesys 3.5 P19 works without any problems. However, P20 is not usable, after starting it hangs "no response". A new installation didn't help either, unfortunately I can't find a more precise error. BR
Last updated: 2024-04-21

Post by cpoi on Safety EL6900 com Error ^{CODESYS Forge talk (Post)}
Hello, I using the EL6900 module with EL 1904 and EL2904 on Ethercat, and I have a ComErr on the EL6900. The FSoE Adresse : EL6900 = 1 EL1904 = 11 EL2904 = 15 Any suggestion? Thanks a lot in advance.
Last updated: 2024-04-26

Post by ademarvribeiro on Upload program ^{CODESYS Forge talk (Post)}
Hello. in my experience, always click "Yes to all" to prevent error when go online. in this way, do you granted the infomation about hardware are the same, and dont lose " PLC configuration" for example.
Last updated: 2024-05-01

Post by rabaggett on CODESYS control for Raspberry Pi 64 SL errors ^{CODESYS Forge talk (Post)}
Update: I found my error in the Scale function, where I used UINT_TO_REAL instead of DWORD_TO_REAL. I fixed it, errors unchanged.
Last updated: 2024-05-02

Post by yannick on Alarm Configuration Notification Action ^{CODESYS Forge talk (Post)}
Hello, I'm trying to configure an alarm variable that changes to True when an error is activated. Unfortunately, the variable is not changing to True. I'm using Codesys V3.5 SP19 Patch7 + Raspi Pi 5. Thanks.
Last updated: 2024-05-13

Post by kevinm on Data source and safety PLC ^{CODESYS Forge talk (Post)}
I am having the same trouble. However, if I change the Login Configuration settings to 'Type: Login using the credentials determined at runtime' then the Connection information continues as 'Connection state: Connecting' and 'Error information: OK'. There is no User Management on the source PLC.
Last updated: 2024-05-16

Post by simonep on new version of CODESYS have problem to load GSDML files ^{CODESYS Forge talk (Post)}
I have update codesys today but now i can't install my GSDML files, until Friday I was always able to load without any problem, now it gives me this error. Codesys version V3.5 SP19 Patch 1 + (64 bit)
Last updated: 2024-05-20

Post by rafaelbrito on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hello, I'm having the same problem. I'm trying to license Codesys running in a Linux container, which I downloaded from the following link (https://hub.docker.com/r/hilschernetiotedge/codesys_control_sl_linux). The same error that you mentioned appears. Is there any solution?
Last updated: 2024-05-22

Post by to-ke on Errors with VisuUserManagement library ^{CODESYS Forge talk (Post)}
Hallo zusammen, hi all, ich habe den gleichen Fehler. Auf einem Raspberry Pi geht der Fehler weg, wenn ich alles bereinige und dann vollständig übersetze. Wenn das Projekt im Codesys Development System wieder neu geladen wird ist der Fehler aber wieder da. Mit eine Win V3 x64 PLC kann ich den Fehler nur unterbinden wenn ich auf der HMI das VUM_Login einbinde. Dieses brauche ich aber nicht, da ich die HMI für das User Management selbst gestaltet habe. Das funktioniert auch. I have the same error. On a Raspberry Pi the error goes away if I clean everything and then compile completely. When the project is reloaded in the Codesys Development System, the error returns. With a Win V3 x64 PLC I can only prevent the error if I integrate the VUM_Login on the HMI. But I don't need this because I designed the HMI for user management myself. That works too. Anyone have an idea to fix this problem. Many thanks
Last updated: 2024-07-09

Post by dennisyhli on Ethernet IP Connection timeout ^{CODESYS Forge talk (Post)}
I use ethernet ip scanner and the connection type is set to multicast. After running the PLC, the ethernet IP will have a connection timeout every 10 seconds. What is the reason for this error?
Last updated: 2024-08-16

Post by remoyang on Package manager ^{CODESYS Forge talk (Post)}
When I opened the package manager, it comes up the error as attached. I tried to uninstall and re-install many times it has the same issue
Last updated: 2024-08-16

Post by simon001 on CAN communication settings for USB2CAN-C ^{CODESYS Forge talk (Post)}
I am using the Innomaker USB2CAN-C device to communicate via CAN in the Windows version of CODESYS, but I am encountering error code 27E2, which indicates that the driver is not found. Could you please advise on how to proceed with the CODESYS settings?
Last updated: 2024-08-18

Post by hfelek on TargetVisu for Linux Package on runtime 4.12.0.0 install error due to Qt dependencies. ^{CODESYS Forge talk (Post)}
I use V3.5.SP20 Patch 2 for development and my device with runtime is armv7l 32-bit arch
Last updated: 2024-08-27

Post by nicopolux on Profinet RPC-call error ^{CODESYS Forge talk (Post)}
I have tested this on several PC, several Windows version and I cannot figure out why the RPC is bloqued. I have no idea how I could make it work before lol thanks all for your help
Last updated: 2024-08-28

Sort by relevance or date