Unable to Connect to Modbus RTU Device ^{CODESYS Forge talk (Thread)}
Unable to Connect to Modbus RTU Device
Last updated: 2024-08-26

Unable to Connect to Modbus RTU Device ^{CODESYS Forge talk (Thread)}
Unable to Connect to Modbus RTU Device
Last updated: 2024-08-26

Unable to Connect to Modbus RTU Device ^{CODESYS Forge talk (Thread)}
Unable to Connect to Modbus RTU Device
Last updated: 2024-09-03

Unable to Connect to Modbus RTU Device ^{CODESYS Forge talk (Thread)}
Unable to Connect to Modbus RTU Device
Last updated: 2024-09-04

How to write multiple coils (Modbus FC15) ^{CODESYS Forge talk (Thread)}
How to write multiple coils (Modbus FC15)
Last updated: 2 days ago

Post by jf-fischer on PFC200 als Protokollumsetzer ^{CODESYS Forge talk (Post)}
Hallo, ich möchte IEC 104 Protokolldaten von einem Gerät über Ethernet empfangen, in ein Modbus-TCP Protokoll umwandeln und weiter geben (lesen und schreiben) an andere Modbus Geräte. Dies soll auch in die andere Richtung funktionieren, so dass daten aus dem Modbus Register vom IEC Gerät ausgelesen werden können. die Umwandlung soll eine pfc200 sps von wago durchführen. am Ende sollen die Daten in einer Webansicht visualisiert werden. das Programm der wago möchte ich in codesys 3.5V programmieren. Kann mir jemand helfen, meine Erfahrung mit Codesys ist leider bis jetzt nur sehr grundlegend.
Last updated: 2024-08-07

Post by damian177 on Delete PLC Log ^{CODESYS Forge talk (Post)}
You already know how clear log ? In codesys I am reading twenty Modbus TCP Devices. When several of those doesn't response , the logs is grovs very fast and my PLC hangs.
Last updated: 2023-10-16

Post by mavitia on Application based license problem - Modbus TCP ^{CODESYS Forge talk (Post)}
raspberry pi is running ubuntu, so it has the codesys control for linux arm 64 bit, IDE is 3.5.19, both were installed last week from the latest versions online, im currently out of the PC but will upload some evidence ASAP
Last updated: 2023-12-18

Post by yelshebani on Add device greyed out ^{CODESYS Forge talk (Post)}
Hi Add device is greyed out, havent connected to the PLC yet. what do I need to do to have ability to add devices, I want to add a Modbus TCP Master device
Last updated: 2023-12-19

Post by mozburg on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Has there been any progress on this issue? Currently running sp19 patch 5 with all packages updated but unable to add more channels...
Last updated: 2024-01-18

Post by irshad on Modbus TCP/IP slave communication errow ^{CODESYS Forge talk (Post)}
While reading the value of a slave device, it shows error frequently and i need to restart my PLC for getting the communication back. In codesys it shows the slave in Red color with error status. How to solve the above
Last updated: 2024-02-03

Post by nano on Dynamic setting of the modbus tcp/ip slave ip address ^{CODESYS Forge talk (Post)}
habe a look to this faq, this should work for u https://faq.codesys.com/plugins/servlet/mobile?contentId=24510471#content/view/24510471
Last updated: 2024-02-17

Post by ph0010421 on Sending Sequential Modbus TCP Packets ^{CODESYS Forge talk (Post)}
Hello You'll need to write a proper sequence to send, then wait for confirmation, and then move on to the next step. Use the CASE statement in ST. It's perfect for creating a sequence.
Last updated: 2024-03-08

Post by vincentger on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Any resolution on this? I have currently 75 channels in my project that i brought up from SP18, which means i am 65 Channels above the new limitation?
Last updated: 2024-04-09

Post by i-campbell on MODBUS TCP REGISTERS CODESYS V3.5 ^{CODESYS Forge talk (Post)}
codesys is in hex and starts at 0 your other program is set to decimal and maybe starts at 0 or 1, I can't tell.
Last updated: 2024-10-12

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
I do not have error anymore using nic with eth0 value. But my network it still 172.17.0.3 like the first picture.
Last updated: 2024-10-23

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
Maybe I don't know. **Maybe if someone know it can help me. ** I will try Constrol SL runtime in the Host. I will try to but only Nic without IP
Last updated: 2024-10-23

Post by timvh on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
RS485 doesn't seem very logical to use in VPLC's in my opinion. I also don't know if this is supported.... But for TCP/IP, I think you still need to configure the Nic settings. See the attached png. In my case enp6s0. When changing this setting, restart the VPLC. What is really nice, is that you don't have to configure the IP address setting in Linux. By setting the Nic to a certain IP address in the CODESYS instance configuration, this is automatically done for you. I only tested this with EtherCAT, but I guess this works the same for Modbus TCP/IP.
Last updated: 2024-10-23

Post by ofey on Modbus TCP communication ^{CODESYS Forge talk (Post)}
Hi! I tried setting up the PLC I'm working with (Beijer GN-9373) to connect to a modbus master running on a laptop. I have an ethernet connection (via USB-C to ethernet) between the laptop and the controller. I have tried following tutorial on how to set this up. I have added an ethernet device with the IP-address of the PLC. Further I added a ModbusTCP_Slave_Device with default settings. I get the error "Failed to open TCP Port: 1" when I try to go online with the PLC. Earlier I tested the exact same set up with the soft PLC from codesys. I can then read/write values correctly with the Modbus master i have running on the laptop. Hope anybody can help me with this, thanks in advance!
Last updated: 2023-10-06

Post by jens on Modbus tcp - channel ^{CODESYS Forge talk (Post)}
Help wanted This is the first time i'm doing a Modbus Tcp project. I have some VLT with a extension module MCA-122. i'm currently unable to write to the VLT slave, but i can read from status word parameter=1603 and address := 16029 where the address is calculated from parameter is ((id x 10)-1). in the manual the functions that are supported are 3 hex, 6 hex, 10 hex, b hex and 11 hex. read holdin registers, write single register, write multiple registers, get comm. event counter, report slave id. i'm only using the Modbus Slave Channel is this wrong when trying to write to the vlt ?
Last updated: 2024-06-13

OPC UA Client unable to connect to CeDeSys OPC UA Server but able to connect to other OPC UA Server ^{CODESYS Forge talk (Thread)}
OPC UA Client unable to connect to CeDeSys OPC UA Server but able to connect to other OPC UA Server
Last updated: 2018-10-30

Post by hanpekel on Reading request counter value from modbus server in application ^{CODESYS Forge talk (Post)}
Any way I can read the value of the 'request counter' (see screenshot) in my application. Amount of client connections is easily found using ModbusTCP_Slave_Device.uiClientConnections; But for request counter it does not seem to be that simple.
Last updated: 2024-10-16

Post by kislov on CODESYS Modbus 4.4.0.0 - Modbus network redundancy ^{CODESYS Forge talk (Post)}
Hi. There is next information in CODESYS Modbus 4.4.0.0 Release Notes: "Modbus network redundancy" How to use this feature? As I understand, new fields in STUCT ModbusTCPComSettings are associated with it, but more detailed information is needed.
Last updated: 2024-10-07

Post by rh-pk on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Hi, i found a solution for me. I had installed a 'old' version of CoDeSys (3.5.18 P5). I tried to add channels there, which works fine. I created a new project, added an Ethernet-Port, added a Modbus-Master and then I copied the ModBus-Slave from my working project to the new project. Now I could add more channels. I add the channels 10 and 11. Then I deleted (please make a backup before :-) the original ModBus-Slave in my working project and copied the extended Slave back to my working project. Surprisingly it is now possible to add new channels. Maybe this will help you.
Last updated: 2024-02-14

How can i program a TCP/IP communication on softlinkARM? ^{CODESYS Forge talk (Thread)}
How can i program a TCP/IP communication on softlinkARM?
Last updated: 2011-06-28

Sort by relevance or date