Post by voffi on Creating Symbol Config File from Python ^{CODESYS Forge talk (Post)}
Hello! One can create a symbol config entry in CODESYS by using create_symbol_config in a python script. Is there a way to create the xml symbol config file (!) from within a python script without going online? Thank you!
Last updated: 2023-12-12

Post by ewi04 on Recipe Manager - RecipeManCommands, load & write wrong values, Bug? ^{CODESYS Forge talk (Post)}
Nice to hear that I'm not the only one. I share your suffering. I was on the verge of doing the same.
Last updated: 2024-01-04

Post by simotion on Multiple Ethercat masters on one IPC ^{CODESYS Forge talk (Post)}
Our IPC has multiple seperate ethernet ports. Is it possible to have two ethercat masters on the IPC (on two different ehternet ports off course)? If so, is there documentation available on this, or are there watchouts? Thansk
Last updated: 2024-01-12

Post by simotion on Multiple Ethercat masters on one IPC ^{CODESYS Forge talk (Post)}
Our IPC has multiple seperate ethernet ports. Is it possible to have two ethercat masters on the IPC (on two different ehternet ports off course)? If so, is there documentation available on this, or are there watchouts? Thanks
Last updated: 2024-01-12

Post by kyo424 on EtherCAT Can't reconnect to servo drive ^{CODESYS Forge talk (Post)}
Hi, I meet the same issue, too. But no one can answer me,so sad. If you got solution, kindly tell me, thanks.
Last updated: 2024-01-26

Post by reinier-geers on Compile error ^{CODESYS Forge talk (Post)}
Ive got a project version 16p3 Running on Epis( 32) . Codesys cant see License stick on Epis and no one can tell me why. So Got me a Crist(64). Change version to version 18.4 But then i get dialog libry problems. Anyone knows why ?
Last updated: 2024-02-22

Post by reinier-geers on Missing Font ^{CODESYS Forge talk (Post)}
Tim. I tried that. After that i used version 19. No problems. After that the Manufacturer whants me to pay for support. I dont pay for there incompetance. So send everythink back. Now looking for a better one.
Last updated: 2024-02-29

Post by doli on Table selected row ^{CODESYS Forge talk (Post)}
Hello. So I have two visualizations. In my main visualization I have a table and in the second one I have a dialog. When I select a row I want that dialog to open. How can I do this? Thank you!
Last updated: 2024-03-20

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
Could you check the taskcycle time in the taskmonitor (online monitor) - do you really see this 1s on Ethercat Task? Need to check this on my hardware but will take some time...
Last updated: 2025-10-21

Post by saml on Eaton HFX Controllers ^{CODESYS Forge talk (Post)}
Hellow every one. DPguy could do you share how you resolved the issues? what Codesys version did you used to fix it? thank a lot!!!
Last updated: 2026-05-26

Post by saml on Eaton HFX Controllers ^{CODESYS Forge talk (Post)}
Hellow every one. DPguy could do you share how you resolved the issues? what Codesys version did you used to fix it? thank a lot!!!
Last updated: 2026-05-26

Post by fpawlak on How to register own component - CMAddComponent() or CMAddComponent2() ^{CODESYS Forge talk (Post)}
Hi, so really oneone has no idea which way is correct one? Or maybe both are okey if they work for me?
Last updated: 2026-03-13

Post by reinier-geers on CODESYS crashes when adding standard OPC UA Information Model to Communication Manager ^{CODESYS Forge talk (Post)}
I only experiance a lot of problems with Version 20 and 21. Version 20 crashes at a online change Version 21 - 5 identical programms in one project. The frist runs. The thirt Crashes. NOt even a screen
Last updated: 2026-03-19

Post by mondinmr on Frustration-Fueled Feedback on Project File Management and Git Integration ^{CODESYS Forge talk (Post)}
Good day, I’m writing this message out of frustration regarding the current way project files are saved as encrypted XML and single-file format in CODESYS. I find this approach to be quite tedious for several reasons: Limited Access to Structured Text: Not being able to access Structured Text (ST) externally makes it impossible to work with alternative editors like VSCode. Tools like VSCode are incredibly responsive and feature advanced systems such as GitHub Copilot, which would be a real game-changer when working with ST IEC. While CODESYS works well for small code snippets or debugging, when the codebase grows, switching to VSCode to boost productivity becomes essential, and copy-pasting between environments is a cumbersome workaround. Poor Integration with Git: This file format also makes it very difficult to integrate effectively with Git. I have tested the internal demo, but for advanced merges, it is unusable. Without properly formatted plain text, it’s impossible to leverage the vast ecosystem of external tools around Git that allow smooth merges in heterogeneous teams. File Corruption on Network Drives: I often work from multiple locations with shared network drives. When the development environment saves a file and something goes wrong midway (which can occasionally happen when using VPNs and network drives), the entire project becomes irrecoverable. There’s no way to cancel the save process, and the development environment freezes. This has happened to me at least four times over the past two weeks, and one of those incidents cost me an entire day of work. All of this is particularly disappointing because I truly believe that the libraries, runtime, and overall work done by CODESYS are exceptional. I find it fantastic that there is a platform allowing development of PLCs and control systems using OOP, which is a huge advantage in modern control engineering. I apologize for the rant, but this issue has been extremely frustrating. Best regards.
Last updated: 2024-10-15

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Are you using a multiplexer? Which one?
Last updated: 2024-11-11

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
CODESYScontrol.cfg will be overwritten, CODESYSControl_Usr.cfg not.
Last updated: 2025-06-13

Post by abinvest579 on COP instruction ^{CODESYS Forge talk (Post)}
Hi, Can anyone faced same issue? Anyone one have solution?
Last updated: 2024-03-27

Post by abinvest579 on COP instruction ^{CODESYS Forge talk (Post)}
Hi, Can anyone faced same issue? Anyone one have solution?
Last updated: 2024-03-27

Post by gseidel on Mismatch between coordinate monitor and actual motion using SMC_GroupJog2, MC_MoveLinearAbsolute (6DOF) ^{CODESYS Forge talk (Post)}
Dear darwin03, my first guess is that the axis scaling of the last axis (joint 6) is not correct. It should be confiugured so that one technical unit equals one angular degree. From the video, it rather looks like 1 technical unit is a full revolution of the joint. (This holds for all rotary axes used with SoftMotion Robotics: they must be scaled so that one technical unit equals one angular degree.) Best regards, Georg
Last updated: 2026-04-07

Post by damian177 on RPi, Codesys , RS232 ^{CODESYS Forge talk (Post)}
Hi, so far I have only used one com port - built-in interface in RPi - RS232 (dev/serial0) as COM1 in Codesys, and my CODESYControl_User.cfg have congiuration like below: [SysCom] Linux.Devicefile=/dev/serial portnum := COM.SysCom.SYS_COMPORT1 Actually I added to my Rpi Hat with 2xRS232 (SPI). - /dev/spidev0.0 and /dev/spidev0.1 How I should change my CODESYControl_User.cfg file to use added porta as COM2 and COM3 in Codesys ?
Last updated: 2023-10-05

Post by oymyakon on Modbus Lockup ^{CODESYS Forge talk (Post)}
Hi i have a project where i am communicating with many modbus devices using TCP to serial. This is all working extremely well except when i turn one of the remote devices off. If i leave the auto reconnect on it still doesn't talk to the rmianing devices and if i turn Auto reconnect off it locks up. Any help would be appreciated. Paul.
Last updated: 2024-08-07

Post by oymyakon on Modbus Lockup ^{CODESYS Forge talk (Post)}
Hi i have a project where i am communicating with many modbus devices using TCP to serial. This is all working extremely well except when i turn one of the remote devices off. If i leave the auto reconnect on it still doesn't talk to the rmianing devices and if i turn Auto reconnect off it locks up. Any help would be appreciated. Paul.
Last updated: 2024-08-07

Post by tk096 on gear over gear (2 masters,1 slave) - how to do it? ^{CODESYS Forge talk (Post)}
Hi, you could calculate the position/dynamics of the slave axis yourself and use one of the function blocks SMC_FollowPosition/SMC_FollowSetValues to move the slave axis. https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Movement/Direct/SMC_FollowPosition.html https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Movement/Direct/SMC_FollowSetValues.html
Last updated: 2024-08-19

Post by renezw on Access to a running Codesys instance via Python ^{CODESYS Forge talk (Post)}
I have a Codesys environment running and would like to inject code into the running environment at the same time using a code generator with Python via the console. So far I can only start a new Codesys instance with Python, but not access an already running one. How can I access the running Codesys instance?
Last updated: 2024-09-03

Post by beavel on Opening and saving files with fileOpenSave dialog ^{CODESYS Forge talk (Post)}
1 + Replying in hopes of getting an answer here. I would also like to modify the look of the FileOpenSave Dialog. I have successfully adjusted the looks of the User management Dialogs but can not find a library file to adjust this particular one. Any help would be helpful. @thk @eschwellinger @sheberle .
Last updated: 2025-09-08

Sort by relevance or date