Post by lorenzo-pisoni on SysProcessExecuteCommand ^{CODESYS Forge talk (Post)}
Last updated: 2024-07-11

Post by codesysbeginner on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Last updated: 2024-10-09

Post by hfelek on More information on Device address [0058.A0DE] ^{CODESYS Forge talk (Post)}
Hi, Isn't there really a logic to get device address regarding router and IP setups? I'm trying be sure on whether I connect to the right device or not without 'wink' capability on the device.
Last updated: 2024-11-21

Post by timvh on FAILURE TO OPEN PROJECT ON ANOTHER COMPUTER ^{CODESYS Forge talk (Post)}
Is it really the same CODESYS version with the same add-ons? Maybe open the CODESYS installer on your home laptop, and export the configuration. On your work PC open the CODESYS installer and import the configuration.
Last updated: 2025-01-22

Post by razebones on SDO_READ_WRITE CODESYS 3 ^{CODESYS Forge talk (Post)}
Last updated: 2025-04-01

Post by dkugler on Mail_Service_SL Lib ^{CODESYS Forge talk (Post)}
Last updated: 2025-08-20

Post by franciscocuevas on Gateway ^{CODESYS Forge talk (Post)}
other
Last updated: 2025-08-23

Post by zatalian on password policy ^{CODESYS Forge talk (Post)}
thanks!
Last updated: 2025-09-15

OPCUA-Client on raspberry pi can not communicate with OPCUA-Server on raspberry pi installed with CODESYS runtime ^{CODESYS Forge talk (Thread)}
OPCUA-Client on raspberry pi can not communicate with OPCUA-Server on raspberry pi installed with CODESYS runtime
Last updated: 2021-11-11

transfer Files from one controller to other controller on Canbus ( both controller are developed on codesys v3.5 ^{CODESYS Forge talk (Thread)}
transfer Files from one controller to other controller on Canbus ( both controller are developed on codesys v3.5
Last updated: 2017-07-17

Post by eschwellinger on Rpi install runtime licence on SP13 ^{CODESYS Forge talk (Post)}
there are big changes on OS side, so you need latest Runtime version which does even work if you stay on an oder CODESYS version.Especially in Bookworm from December it must be 4.11.0.0 use Bookworm from October
Last updated: 2024-01-09

Post by theo on Forget liscence on raspberry ^{CODESYS Forge talk (Post)}
Hello everyone, I installed my liscence on my raspbery but I can't reactivate it after installing it on a new SD card because the old one was broken. I get an error message 10957.
Last updated: 2024-01-25

Post by valentinakern on error device ^{CODESYS Forge talk (Post)}
Last updated: 2024-02-06

Post by anttimurtsi on Html5 controls error ^{CODESYS Forge talk (Post)}
Last updated: 2024-02-07

Post by jshirazi on Codesys Control for Raspberry Pi 4.10.0.0 - Raspberry Pi OS > 2023-12-05 ^{CODESYS Forge talk (Post)}
Hi, I have some issues on "Bookworm October 64bit" on GPIOs (Not running) is it related problem? no problem on "Bookworm October 32bit". Thanks
Last updated: 2024-02-19

Post by k4zz on Static Code Analysis ^{CODESYS Forge talk (Post)}
Last updated: 2024-03-20

Post by dkugler on EtherCAT fieldbus ^{CODESYS Forge talk (Post)}
Last updated: 2024-04-12

Post by huzeyfe on SMC_INT_QPROF_DIVERGES ^{CODESYS Forge talk (Post)}
Last updated: 2024-04-15

Post by mjk97 on CFC Toggle Function ^{CODESYS Forge talk (Post)}
Last updated: 2024-05-03

Post by andrew-budaiev on Formatting Integer ^{CODESYS Forge talk (Post)}
Last updated: 2024-06-17

Post by mubeta on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Hello everyone, I have a very simple program for the process, but it's driving me crazy and I can't see the problems I'm left with: Short topological description: Dual Core Berghof controller with softmotion runtime version 3.5.19.30; Two axes with servodrive on canopen bus, clocked distributed from master; Ethercat I/O node; 2 ms ethercat task, 2 ms canopen bus cycle time; I/O objects of the canopen master and canopen drives connected to the ethercat task cycle; Problem 1: Two separate programs each manage their own axis and drive, with separate state machines. A first axis moves primarily in velocity, except having to position itself absolutely at a predetermined point at the end of the job; the second axis, on the other hand, is a paper unwinder that changes, for each job cycle, from actions in absolute, relative, and cam displacement with the master axis. Well, the state machine of both axes was written in such a way as to call running the useful FB and change it on state change in this way: CASE i_stateMachine OF 0: o_Power(Enable := TRUE, bRegulatorOn := FALSE, bDriveStart := FALSE, Axis := o_PaperUnwinderAxis); o_MoveAbs(Execute := FALSE, Axis := o_PaperUnwinderAxis); o_MoveRel(Execute := FALSE, Axis := o_PaperUnwinderAxis); o_CamSelect(Execute := FALSE, Master := o_MachineAxis, Slave := o_PaperUnwinderAxis, CamTable := cam_PaperUnwinder); o_CamIn(Execute := FALSE, Master := MachineEncoder, Slave := o_PaperUnwinderAxis); o_CamOut(Execute := FALSE, Slave := o_PaperUnwinderAxis); o_SetPosition(Execute := FALSE, Axis := o_PaperUnwinderAxis); IF ... THEN i_StateMachine := 10; END_IF; 10: o_Power( Enable := TRUE, bRegulatorOn := TRUE, bDriveStart := TRUE, Axis := o_PaperUnwinderAxis ); IF o_Power.Status THEN i_StateMachine := 20; END_IF; 20: (* Avanzamento carta *) o_MoveAbs( Execute := TRUE, Position := o_Somewhere, Velocity := 25.0, Acceleration := 3666.7, Deceleration := 3666.7, Jerk := 48000.0, Direction := MC_DIRECTION.positive, Axis := o_PaperUnwinderAxis ); IF o_MoveAbs.Done THEN o_MoveAbs(Execute := FALSE, Axis := o_PaperUnwinderAxis); i_StateMachine := 30; END_IF 30: d_HomingPosition := ...; o_SetPosition( Execute := TRUE, Position := d_HomingPosition, Mode := FALSE, Axis := o_PaperUnwinderAxis ); (* ... *) IF o_SetPosition.Done = TRUE THEN o_SetPosition(Execute := FALSE, Axis := o_PaperUnwinderAxis ); o_LogServer.Append(sMessage := '...', lscClass := LOGSERVER_CLASS.ALWAYS, sdt := o_CommonsMgrData.systime.sdtLocal); i_StateMachine := 40; END_IF; 50: ... The code above is a sketchy example of what I wanted to write. But it gives me a spot problem: in some, the state change results in a drive error, which is unrecoverable except with a reinitialization via SM3_ReinitDrive(). Things are improved a little if in the program I always run the call of all softmotion blocks in this way: o_Power(Axis := o_PaperUnwinderAxis); o_Jog(Axis := o_PaperUnwinderAxis); o_Halt(Axis := o_PaperUnwinderAxis); o_MoveAbs(Axis := o_PaperUnwinderAxis); o_MoveRel(Axis := o_PaperUnwinderAxis); o_CamIn(Master := MachineEncoder, Slave := o_PaperUnwinderAxis); o_CamOut(Slave := o_PaperUnwinderAxis); If I don't execute all the calls of all the motion FBs used, when exchanging machine state often (but not always), the axis goes into error with event id THE_FB_WASNT_CALL... Done a little diagnostics it seems that the FBs return the bDone, before they are completely terminated. I tried doing the machine state exchange not with the bDone bit of the FBs, but with the 'standstill' state of the axis. It didn't seem to change anything. Problem 2: During the use SM3_ReinitDrive() I get the erro in the log: "NetID 0: SDO read error for object 16#607C..." Assuming that the device involved it's one of the two servodrive, (no others device are present in the network), I don't found any object 0x607C in the 'possible object list in/out' of the two drive, and I don't understand where this object can be listed. So any ideas and suggestions regarding these two issues will be very, very welcome. If you need the source project, I am willing to send it.
Last updated: 2024-07-17

Post by maldus512 on How to adapt Codesys Control SL to custom board ^{CODESYS Forge talk (Post)}
Hello everyone, I have been given the task to develop I/O drivers for a custom made, Linux based board to allow for Codesys applications to run and control the hardware. I have successfully installed Codesys Control SL for ARM/Linux and tested it with a simple demo application. Now I should start interfacing the runtime to the actual hardware; I should be able to interact with 2 RS485 serial ports, a few GPIOs and an I2C port, all of which already have the corresponding /dev/ interface in the Linux system. I am having trouble understanding how it should be approached. I have found sporadic references that fail to lead to a really comprehensive documentation. For example: The store page (https://store.codesys.com/en/codesys-control-for-linux-arm-sl-1.html#options) mentions a "runtime package" that should allow "Integration of existing C code" and "Usage of local I/Os", which seems exactly what I need to interact with custom peripherals. I have found no further reference to Codesys-C interpop. The Codesys Help page for the runtime package has a page on the "Development of Drivers" (https://content.helpme-codesys.com/en/CODESYS%20Control/rtsllinuxrbpdriverdevelopment.html) that suggests to either "Implement a function block" or "Implement I/O drivers". Those in turn lead to this page (https://forge.codesys.com/drv/io-drivers/doc/Generic/) which describes briefly an XML schema to describe new devices; unfortunately, it doesn't mention what to do with such a description (i.e. how does the runtime know about it) or how it is in any way connected to the actual hardware. Could anyone give me some pointers? I should also mention I have no prior experience with Codesys, so maybe I'm missing an obvious answer.
Last updated: 2024-08-09

Post by serwis on Dynamic target position tracking ^{CODESYS Forge talk (Post)}
Hello, I am trying to control a servo drive and dynamically set its position. I control the drive via EtherCAT with a cycle time of 500us. I use the MC_MoveAbsolute block for this. The problem is that when using a PID controller, I generate the positions I want the drive to move to on an ongoing basis, and I would like the position to be set immediately. The MC_MoveAbsolute block must receive a rising edge to execute, and I would like the movement to be performed without waiting for this edge. I have created a function that generates a rising edge every 1 ms, but I am unable to change this time to 500 µs because the TON function does not support times shorter than 1 ms. Below is the code to call the rising edge: IF Exe = TRUE THEN delay1(IN:=TRUE, PT:=T#1MS); IF delay1.Q = TRUE THEN Exe := FALSE; delay1(IN:=FALSE); END_IF END_IF IF Exe = FALSE THEN delay(IN:=TRUE, PT:=T#1MS); IF delay.Q = TRUE THEN Exe := TRUE; delay(IN:=FALSE); END_IF END_IF END_IF Here is the code for calling the MC_MoveAbsolute function: MoveDegree( Axis:= Tilt, Execute:= Exe, Position:= position_target - (base_angle_real * feedforward_turn), Velocity:= vel, Acceleration:= acc, Deceleration:= dec, Jerk:= jerk, Direction:= MC_DIRECTION.shortest, BufferMode:= MC_BUFFER_MODE.Aborting, Done=> , Busy=> , Active=> , CommandAborted=> , Error=> , ErrorID=> ); I realize that there are probably better methods for performing this type of task. How can I implement motion with a dynamically changing setpoint? THANKS
Last updated: 2025-09-05

Post by ricola on codesys sp20 opcua not working ^{CODESYS Forge talk (Post)}
Hi, same pb for me ! did you find a solution ? (I'm working on 2 raspberry pi ) The same project compiled for 4.8.0.0 runtime with CodeSys 3.5SP20 is working fine on one target, and on the other one, my UAexpert receives the same "BadIdentityTokenInvalid" and none is working on 4.11.0.0 either ... anybody ?
Last updated: 2024-08-11

Post by winki on Scan Network on gateway created with Control Sl ^{CODESYS Forge talk (Post)}
Hello, I am new on CODESYS environement. I am used to BECKHOFF env. I would like to use codesys on debian distribution. I followed this tutorial : https://www.youtube.com/watch?v=TVF0LV279_4 But I am stuck on selected the device. I do not understand, everything is running correctly Someone have an idea ? Loic
Last updated: 2024-10-16

Sort by relevance or date