Post by atone on Set DeviceID of an IO-Link Sensor at Runtime ^{CODESYS Forge talk (Post)}
I need to be able to change (set) the DeviceID of an IO-Link sensor (see DeviceID.png) at runtime. I tried with both ProfinetCommon.PN_PortConfiguration and ProfinetCommon.IOL_PortConfiguration, but I get an error for both when I try to read the port configuration (see PN_PortConfiguration.png). Does one of those FBs is the right one for my purpose? Do I possibly make a mistake when assigning the parameter IOLD_ID/IOLM_ID?
Last updated: 2025-03-19

Post by glutenaron on Safety drive EL6900 and mitsubishi ^{CODESYS Forge talk (Post)}
Hi, Im wokring to get my servo mitsubishi mr-j5-g40-rnj1 working with my safety drive. I have as you can se in the picture Ek1100 koppler and EL6900 as safety plc. My questien is how do i connect the safety_drive to the SM3_Drive_ETC_Mitsubishi_MelServo_J5_Axis1 down below? I get the error ((Logical I/Os]: The logical device 'Safety_Drive' is not mapped to any physical device.)) but how do i map this? regard
Last updated: 2025-05-13

Post by nz-dave on Custom library, ethernet/ip adaptor ^{CODESYS Forge talk (Post)}
Im Putting alot of my custom functions blocks into a library I have a EthernetIP VSD FB that i would like to get Status from the adaptor. EthernetIP_remote_adaptor.estate is one what i want to get. so anyone know how to point that to my function block? when i use the block i just want to have an input "Drive" that would point to the adaptor. like in softmotion when you just put the axis name in the FB to point the FB to a certain axis. Hope that makes sense, cheers
Last updated: 2025-05-21

Post by eboyd on AOI's ^{CODESYS Forge talk (Post)}
Hello, I'm currently working on transferring a project I recently created on Studio 5000 to CODESYS and unfortunately CODESYS isn't compatible with AOI's so I was wondering if there was anyone who could help me transfer these L5X AOI blocks to ST Function Blocks that I can import into CODESYS so I can use them for this project or if you know where I can find preexisting Function Blocks for these AOI's. Thank you so much!
Last updated: 2025-09-02

Post by eboyd on AOI's ^{CODESYS Forge talk (Post)}
Hello, I'm currently working on transferring a project I recently created on Studio 5000 to CODESYS and unfortunately CODESYS isn't compatible with AOI's so I was wondering if there was anyone who could help me transfer these L5X AOI blocks to ST Function Blocks that I can import into CODESYS so I can use them for this project or if you know where I can find preexisting Function Blocks for these AOI's. Thank you so much!
Last updated: 2025-09-02

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

Post by spiessli on Softmotion axis to CANopen Maxon IDX drive ^{CODESYS Forge talk (Post)}
Hi, I want to use Maxon IDX drives for some simple robotic applications. I have used Maxon's Epos for generating a DCF file to import in Codesys (attached). Then I can add the IDX motors under a CANopen manager in the device tree. Unfortunately, I cannot add a "softmotion axis" to the IDX motors. Now I am wondering, why? Without being able to attach a softmotion axis to the device in the device tree, the use of the motor is greatly reduced... spiessli
Last updated: 2024-01-05

Post by haydermsalih on OSCAT Network LIBRARY: FTP_CLIENT ^{CODESYS Forge talk (Post)}
Hello I am using FTP_CLIENT to donwnload/Upload a text or CSV file from FTP server. UpLoading from PLC to FTP server is working without any problem but when I try to download from FTP server I get an error. The FTP_CLIENT Block allows me to add URL but I do not where I can specify the direcory to save the downloaded file... is there anyone has an experience with downloading from FTP server using FTP_CLIENT block. Thanks in advance Hayder
Last updated: 2024-01-24

Post by rpostwvu on Shared Memory Access Issues ^{CODESYS Forge talk (Post)}
I got the shared memory example. I'm pretty sure I'm successfully created a memory space, CreateResult returns 18. szName:='CodesysDataShare'; hShm := SysSharedMemoryCreate(szName, 0, ADR(uxiSize), ADR(CreateResult)); I'm trying to access this memory with a C# application, but I get "Unable to Find Specified File". I suspect that Codesys and/or Visual Studio code alters the name I choose? Being in Windows, I cant find a way to see the mapped memory list. ~~~ using (var mmfRead = MemoryMappedFile.OpenExisting("CodesysDataShare",MemoryMappedFileRights.ReadWrite)) ~~~
Last updated: 2024-01-29

Post by nmcc on Toggling Visualizations using HMI Physical Buttons ^{CODESYS Forge talk (Post)}
Hey thank you for the reply dkugler. I am sorry if this seems like a stupid question. I have the use current visuvariable checkbox enabled. I can see the string names of all my visualizations. I am trying to use ladder logic to be the anser to the button press using "VisuElems.CurrentVisu := 'MainScreen';. This returns an error. Any idea what I am doing wrong or could you point me in the right direction for fixing this. Thanks,
Last updated: 2024-02-13

Post by nmcc on Toggling Visualizations using HMI Physical Buttons ^{CODESYS Forge talk (Post)}
Hey thank you for the reply dkugler. I am sorry if this seems like a stupid question. I have the use current visuvariable checkbox enabled. I can see the string names of all my visualizations. I am trying to use ladder logic to be the anser to the button press using "VisuElems.CurrentVisu := 'MainScreen';. This returns an error. Any idea what I am doing wrong or could you point me in the right direction for fixing this. Thanks,
Last updated: 2024-02-13

Post by sumit on Not able to see input data coming from eip adapter on codesys ^{CODESYS Forge talk (Post)}
Hello there, I have an eip adapter running (remotely) that is sending data back to eip scanner (running on codesys). I can send data from scanner (codesys) to the adapter but not getting the data back from the adapter. I have verified the incoming data on wireshark but I don't see this data in the codesys. I have tried local variable mapping and global variable mapping not variable values just stays at 0. Please guide.
Last updated: 2024-02-29

Post by niallel on How to change bHiresMode ^{CODESYS Forge talk (Post)}
Hi, I'm trying to get Scaling working on my axis. An increment produces 36.6mm of movement, so I want to put the units in application as 36.6. However the docs say that I need to change bHiresMode as it doesn't show me the option for Precision in the User Interface. I'm thinking that I need to change the precision so I can enter decimal places. How can I do this, or is my thinking wrong? Thanks,
Last updated: 2024-03-11

Post by aniket-b on Multiple function blocks are not executing at the same time in ladder logic ^{CODESYS Forge talk (Post)}
I have two ethernet Ip drives and created Function Blocks for different motions tasks. I am using same FB for both the drives. When I try to execute the relative move start command on FB for both the drives it is not working. However, if I add 1ms second delay between the execution of each drive it is working. Also when I change the rung order it is working for the first drive in the rung. what could be the wrong here?
Last updated: 2024-03-12

Post by remcoborghuis on C0032 Error to type Pointer to IoConfigParameter ^{CODESYS Forge talk (Post)}
Hi All, I'm using codesys on a raspberry PI. I use V3.5 SP18 Patch 2 development system and codesys for raspberry pi 4.8.0.0. Sometimes when I build the project I get error messages C0007: Expression expected instead of ',' and C0032: Cannot convert type 'Unknow type: '!!!'ERROR'!!!" to type 'POINTER TO IoConfigParameter'. I can't click on the message to bring me to the fault. After I do a "Clean all" the build finishes successful. Anyone who can help me with this problem? Thanks! Remco Borghuis
Last updated: 2024-03-25

Post by pjoret on IFM CR711S Can Low Level Library Use ^{CODESYS Forge talk (Post)}
Hello, I'm using CR711S from IFM and I would like to use the CAA Can Low Level in de Safety part. I already use it on the Standard part and it works properly. I would like to know if there is some restriction on using it on the safepart of the PLC (I tried but my PCL put himself in Stop...) ? And if you have some example or even a forum with some types on IFM and CoDeSys, I would Take It. Have a nice Day.
Last updated: 2024-04-03

Post by alez on CANOpen SDO to write VISIBLE STRING ^{CODESYS Forge talk (Post)}
Hello, I am experiencing difficulties in configuring a CANopen device by sending SDOs. In particular I am attempting to write an Object Dictionary that has VISIBLE STRING as the Data Type. When I try to configure the sending of an SDO from Codesys to configure this parameter I am not allowed to enter a string value. In my particular case I am trying to change the Manufacturer Device Name ( Index 0x1008 ). Could it be that Codesys doesn't manage these types of variables?
Last updated: 2024-04-29

Post by wiresplus on Display minutes as hours & minutes ^{CODESYS Forge talk (Post)}
Hello, I have a counter that increments an INT value once per minute I want to display this value in Minutes until 60, then Hours/Minutes thereafter on the HMI Codesys V3.5 SP16 I can divide the minutes by 60 to get hours, but then the minutes is still more than 60. Example: a process has run for 350 Minutes. I need to display "5 Hours 50 Minutes" But if it's only been 45 Minutes, I don't want "0 Hours 45 Minutes" , just "45 Minutes"
Last updated: 2024-05-25

Post by nelsonreis on Help with IFM EcomatController CR710S in Codesys ^{CODESYS Forge talk (Post)}
Hi, Recently I bought a CR710S controller from IFM. I installed Codesys V3.5 SP11 as recommended and all required packages (including the safety packages and the IOWrapper package). However, I can't even open the project template without getting errors related to libraries failing to load (below in the first print screen). Then, clicking ok appears only 2 errors (second print) and when trying to go to simulation and login I get another 2 different errors (third print). I really appreciate any help anyone can provide, I'm completely stuck on this right now.
Last updated: 2024-06-04

Post by dario99 on Error when creating a new HTML5 visualisation ^{CODESYS Forge talk (Post)}
Hello, I'm quite new here. I would like to create a new HTML5 visualisation. I have already imported some templates via the visualisation elements repository, this worked fine. However, when I want to open the html5control.html in the editor or create a new project myself, I always get this error: default filesystem storage could not be found. Did you add storages.plugin to the profile? I can't find this plugin. The Package Designer (V4.1.0.0) and Codesys Visualisation (V4.5.0.0) plugins are installed Can anyone help me? Thank you very much!
Last updated: 2024-06-14

Post by mizi on SM_Drive_Virtual ^{CODESYS Forge talk (Post)}
Hi I recently started learning Codesys SoftMotion. At first, I mainly used YouTube videos. I stopped at two videos where the same problem keeps recurring. fbReadPos( Axis := X_Axis, Enable := TRUE, Position => gAxes.lrActualPos); <- axis cannot move I checked the entire code line by line. Zero errors. GPT spits out nonsense, throwing up increasingly worse errors. And when I copy its code, it says the code is wrong and gets stuck in a loop of its own stupidity. Can anyone explain why it doesn't work? Link to the video below: https://www.youtube.com/watch?v=CYa2HvYZgbM&list=PLsEhEcYjG7na0OveU7cqFXBx7ATyGGn0A&index=3
Last updated: 2025-10-21

Post by kalmeyer on NO SIGNAL ON POWER_ON FOR STEPPER MOTOR ^{CODESYS Forge talk (Post)}
I WOULD BE GRATEFUL FOR HELP....✔✔✔ I HAVE SPENT A LOT OF TIME ON THIS "SMALL" PROBLEM😢 I HAVE MADE A MC_POWER FOR STEPPERMOTOR. BUT I DO NOT GET A "HIGH" ON THE STATUS OUTPUT EVEN THOUGH PENABLE, PREG AND PDRIVESTART ARE ACTIVATED ( SEE ATTACHED WRONG_1) HAD I MADE SOME ERROR IN PLC_PRG_1..???? (WRONG_2) 1000 THANKS FOR HELP WITH THIS PROBLEM. 👀👀 /KLAUS FROM DENMARK
Last updated: 2025-11-23

Post by tommyk-mar on Smooth path is not working with SMC_NCInterpreter ^{CODESYS Forge talk (Post)}
Hello, Im using SMC_NCInterpreter and SMC_NCReadFile2 to read gcode program for CNC machine and what I have observed is that G51 and G52 is not smoothing the path. Machine stops in every point, what could I do to make machine pass through the points without stopping or what could allow me to use smooth path corretly if I use NCInterpreter. Im using it because I want to add variables to my gcode and its not possible directly from the CNC editor thats why I do use external file. Any ideas?
Last updated: 2026-03-26

Post by darwin03 on Mismatch between coordinate monitor and actual motion using SMC_GroupJog2, MC_MoveLinearAbsolute (6DOF) ^{CODESYS Forge talk (Post)}
Hi Guys!!! I am experiencing an issue when trying to move 6DOF using SMC_GroupJog2 and MC_MoveLinearAbsolute, but I don't understand why, when I jog only X or Y, the coordinate I monitor just changes the X or Y value. It's true, but in reality, Joint6 is still running like the video. Am I wrong somewhere? Many thanks for considering my request.! Video: https://drive.google.com/drive/folders/1vRHQ3AtTO3mijptqZgn5OcP9pyi527Jm?usp=sharing
Last updated: 2026-04-06

Sort by relevance or date