Post by anoori on Setting up Raspberry pi as an Opc ua Server with UaExpert as Client ^{CODESYS Forge talk (Post)}
I am trying to set up my Raspberry Pi as an OPC UA server and use UaExpert on my Pc as the OPC UA client.However, Im encountering some certificate-related errors in UaExpert: 1.Unable to get local issuer certificate. 2. Unable to get certificate CRL. 3. Unable to verify the first certificate.
Last updated: 2024-09-11

Post by anoori on setting up Raspberry pi as an opc ua Server with UaExpert as Client ^{CODESYS Forge talk (Post)}
I am trying to set up my Raspberry Pi as an OPC UA server and use UaExpert on my Pc as the OPC UA client.However, Im encountering some certificate-related errors in UaExpert: 1.Unable to get local issuer certificate. 2. Unable to get certificate CRL. 3. Unable to verify the first certificate.
Last updated: 2024-09-11

Post by rickwot809 on Codesys Soft PLC OPC UA server ^{CODESYS Forge talk (Post)}
Enabling Anonymous Login 1. Navigate to 'Device' > 'Communication Settings' > 'Device'. 2. Next, click on 'Change Runtime Security Policy'. 3. In the new window, find and check the box for 'Allow anonymous login'. After completing these steps, you should be able to communicate with the OPC UA server.
Last updated: 2025-09-11

Post by bryandimino on OPC Da Server Code Meter Issues after Enabling License ^{CODESYS Forge talk (Post)}
I'm trying to get the OPC server setup on my machine and currently I'm not having luck. I went ahead and got my license setup. However when I go to run WinCoDeSysOPC.exe I get an error message that I don't have the code meter licenses installed. Does anyone have any ideas on how I can fix this issue?
Last updated: 2024-05-02

Post by mondinmr on Jitter problems on imx8 ^{CODESYS Forge talk (Post)}
We are experiencing serious jitter issues on an ARM64 imx8. Until now, on rpi and beaglebone derivatives, and on Intel, we never encountered jitter issues unless they were already present on the device. In this case, as can be seen from the attached graph, we have excellent maximum latency. The cyclictest on the isolated core dedicated to IEC CODESYS tasks shows a latency of 37µs, with an average of 14µs. Usually, on all other devices, with an RT kernel, with the appropriate parameters to avoid frequency throttling, with properly managed IRQs, and with the disabling of large page sizes, the jitter measured by CODESYS is very close to the cyclictest latency. However, on this imx8, we are noticing a fluctuating value of +/- 300µs that seems to be added to this latency, as if something occasionally miscalculates the sleep times by exactly +/- 300µs. Two screenshoot attached. - Result of cyclictest - Jitter on CODESYS Tasks are assigned to isolated core!
Last updated: 2023-10-18

Post by hwopereis on How to use Application Trigger in Modbus TCP Server ^{CODESYS Forge talk (Post)}
Hi, I'm currently reading and writing several registers with a Modbus TCP server as a subdevice of a Modbus TCP Client. If I read and write cyclically, there are no issues. The problem is this: I see there is also the option to write by "Application", which I would like to use. However, I don't know With the Modbus RTU client, I see there is a trigger variable, xTrigger, to trigger the writing tasks. However, I can't find any such trigger for the Modbus TCP Client. Does anybody know how to implement the trigger behavior for the Modbus TCP client? In particular, I struggle to find the exact "trigger" variable. I'm running Modbus Client version 4.4.0.0 Thanks in advance!
Last updated: 2024-07-01

Post by timvh on Problem Reading Registers via Modbus from non Codesys device ^{CODESYS Forge talk (Post)}
According to the documentation: https://wiki.teltonika-networks.com/view/RUT956_Modbus You need to create a Channel to read 2 registers from address 143 to get the lattitude. It doesn't specify if you need to read it as a Holding Register or as an Input Register. You could try both. So in the Teltonika router, you need to enable it as being a Modbus Server. Then in CODESYS add an Ethernet Adapter, then a Modbus Client (Master) and to the Client (Master) add the Modbus Server (Slave). Set the IP address and add the Channel. The please consider that CODESYS doesn't update any variables when they are not used in the application. In the I/O mapping tab of your I/O configuration, you can set the "Always update" to enabled.
Last updated: 2025-03-08

Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Dear Forum I have the following config: Codesys_IDE 3.5.20 Codesys_Virtual_Control 4.13 Codesys_License_Server 4.13 I know these are not the newest versions, but in my mind these should work. I have the same problem here. I have the license server installed on the host, and in the docker container(Codesys virtual control) I'm able to ping the license server. In the /conf/codesyscontrol/CODESYSControl_User.cfg I have added the following config: [CmpCodeMeter] EnableNetLicenses=1 LicenseServer.1="ip address of the host" I have tried it via the wbm web-page. I can create new license containers over there, but still no luck. I also have tried to run the docker container with the -s "server_IP" command. I have searched for some tutorial's but I couldn't find it. If anyone has some clue or can give me a push in the right direction it would be very very welcome!
Last updated: 2025-09-29

Post by superjojo2002 on Licensing info not available. ^{CODESYS Forge talk (Post)}
If support for a containerized CODESYS runtime with a license isn't feasible, then I've considered an alternative approach: I've purchased and activated a "CODESYS Control Basic S" license on my Windows notebook, where I already have the Codemeter Control Center installed. Upon activation, I can see the CODESYS license as active on my notebook. Subsequently, I followed the instructions provided in this link (https://faq.codesys.com/display/CDSFAQ/How+to%3A+Setup+a+Wibu+Network+Server+Access+for+Licenses) to configure the Wibu runtime in the CODESYS container to access my external license server hosted on my notebook by editing the CODESYSControl_User.cfg file accordingly. However, it's worth noting that I'm still receiving a response from the Licensing Manager indicating that the runtime is persistently searching for a dongle instead of recognizing the soft container. So how can I get my runtime licensed now? Any ideas?
Last updated: 2024-03-20

Post by timvh on CANbus issue ^{CODESYS Forge talk (Post)}
On a PC with the Control Win, this is probably related to the fact that the CAN drivers are not loaded. Go to the folder where your Control Win Configuration file is: - E.g. C:\ProgramData\CODESYS\CODESYSControlWinV3x64\E1FA7ABE - Open the CODESYSControl.cfg - Remove the semi-colon in front of the CAN driver you want to use (section ComponentManager). - Set the component ID to the next number in the list (e.g. Component.8) - Save this file and restart the Control Win.
Last updated: 2023-09-14

Post by richiemuia on Static Analysis, Loading Files via script. ^{CODESYS Forge talk (Post)}
I've seen that you can use cmds like below to run SA from scripts. system.commands["staticanalysis", "run"].execute() But I would like to run different SA configuration files to create separate logs and cant find anywhere in the scripting engine if this is supported. This stems from if I turn on everything, SA stops reporting issues in the message log when the list gets over 600ish issues. Once we have done an initial clean up of code this wont be an issue, but I'm trying to get a baseline to track improvement.
Last updated: 2024-08-21

Post by richiemuia on Static Analysis, Loading Files via script. ^{CODESYS Forge talk (Post)}
I've seen that you can use cmds like below to run SA from scripts. system.commands["staticanalysis", "run"].execute() But I would like to run different SA configuration files to create separate logs and cant find anywhere in the scripting engine if this is supported. This stems from if I turn on everything, SA stops reporting issues in the message log when the list gets over 600ish issues. Once we have done an initial clean up of code this wont be an issue, but I'm trying to get a baseline to track improvement.
Last updated: 2024-08-21

Post by spilin on All devices lost for all installed version ^{CODESYS Forge talk (Post)}
hello. After installing the latest version of codesys (3.5.20) from codesys installer, I had a problem. All my devices disappeared. Both PLCs and IO modules and network devices disappeared from my list. I browsed through the Windows files and I can find them in the programdata/codesys/devices folder. The files remain there, but they are not available within codesys (same error in all installed versions) which in this case are 3.5.16 and 3.5.19. Does anyone know how I can reimport or resynchronize my devices folder again? Thanks
Last updated: 2024-09-11

Post by jwhaley on C0007 Errors ^{CODESYS Forge talk (Post)}
I ended up figuring it out It wasn't in my code. It kept taking me to 2 of my visualizations but it wasn't going to anything specific. Figured out it was some arrows that I had made to buttons for a mouse click to go to the other visualizations. I removed the text in the assign box but didn't remove the action "change shown Visualization from the list. If I deleted the images all together, the error went away. That's how I thought to go look at that.
Last updated: 2024-10-10

Post by micik on PLCOpenXML Export/Import with Visualisation ^{CODESYS Forge talk (Post)}
I have noticed that Codesys doesn't provide option to Export any Visualization objects even though there is option to check to export VISU_TASK, which is strange because when Import in another empty project, user will end up with build errors. I understand that probable reason for this is that PLCOpenXML specification includes only "PLC" parts of the project (POU, PRG, variable lists, device ....), but not sure about it. Perhaps, there is some option to include visu objects also in the plcopen xml export list??
Last updated: 2025-01-07

Post by macros8 on Translation - How to get text as reference in Frames translated? ^{CODESYS Forge talk (Post)}
Hi, one more point. I have been able to create Property of Text which is added to Global text list so it´s fine. But as soon as I use Frame configuration I lose all other properties but some very basics. I need to have still possibility to set Input configuration because my element is Button. Do you know how to make visible all standard properties + my own properties created in Frame configuration? Thanks a lot. M.
Last updated: 2024-01-03

Post by mizi on SM_Drive_Virtual ^{CODESYS Forge talk (Post)}
Hi I recently started learning Codesys SoftMotion. At first, I mainly used YouTube videos. I stopped at two videos where the same problem keeps recurring. fbReadPos( Axis := X_Axis, Enable := TRUE, Position => gAxes.lrActualPos); <- axis cannot move I checked the entire code line by line. Zero errors. GPT spits out nonsense, throwing up increasingly worse errors. And when I copy its code, it says the code is wrong and gets stuck in a loop of its own stupidity. Can anyone explain why it doesn't work? Link to the video below: https://www.youtube.com/watch?v=CYa2HvYZgbM&list=PLsEhEcYjG7na0OveU7cqFXBx7ATyGGn0A&index=3
Last updated: 2025-10-21

Post by sturmghost on Codesys Visu Update Frame Parameters No Dialog Appears to update ^{CODESYS Forge talk (Post)}
This is still a huge problem. Does someone know how to update the frame references (not manually for every frame-element...)?
Last updated: 2024-08-12

Post by felipemsgarcia on Axis EtherCAT address ^{CODESYS Forge talk (Post)}
Hello, I'd like to write some parameters to axes from inside a function block where I passed axis by reference, using ETC_CO_SdoWrite. Is it possible to get the device address from inside the function block? Please see example below. Thank you!
Last updated: 2025-03-06

Post by joanm on Function block method default arguments ^{CODESYS Forge talk (Post)}
The new TwinCAT 4026 will add those default parameters, as TwinCAT drinks from Codesys I guess that will be implemented soon (or maybe, it already is given what tvm says in the previous post).
Last updated: 2024-01-04

Post by smartcoco on Bit / Bool data types in function parameters ^{CODESYS Forge talk (Post)}
Memory addressing is measured in bytes, with BOOL occupying one byte. BIT is quite unique as it occupies one bit. So, try not to use BIT in the program. You can use the Unpack function to solve your problem.
Last updated: 2024-01-18

Post by eschwellinger on EtherCAT drive not moving ^{CODESYS Forge talk (Post)}
you need to switch to a realtime capable plc. Do not map variables, this will be done by the SoftMotion. And check the Ds402 parameters in the generic parameterview on the Softmotion Connector.
Last updated: 2024-03-05

Post by mibkid17 on Ethernet Adapter message: Adapter configured. Open all connections ^{CODESYS Forge talk (Post)}
Trying to control 525 with codsys the info from C-4 section. i should input the value in user defined parameters? in the generic device
Last updated: 2024-04-09

Post by pasillalej on No gateway with the given settings could be found ^{CODESYS Forge talk (Post)}
Go to Online>Communication Parameters...>Gateway>TCP/IP> Click on "New..." and reestablish your connections with whatever IP address and set up information you have. Bypass whatever is necessary as you may have to redownload to the PLC.
Last updated: 2024-05-09

Post by eschwellinger on Accessing parameters from a structure or function block with the web interface ^{CODESYS Forge talk (Post)}
yes, but you could use a demo project in the analyzer to check other types: https://analyzer-eu.automation-server.com/help/en/tags this should work.
Last updated: 2025-12-02

Sort by relevance or date