Post by ulvis on NetBase Services Example ^{CODESYS Forge talk (Post)}
According to the recent feature briefs from Codesys, the CAA libs are beeing depreceated. Anyone to confirm?
Last updated: 2026-04-16

Post by eschwellinger on Device User Logon ^{CODESYS Forge talk (Post)}
Hi Suyash, if possible update to latest CODESYS version. license should work version independent.
Last updated: 2026-05-13

Post by eschwellinger on Ladder editor bug with 3.5.21.20 ^{CODESYS Forge talk (Post)}
which ladder plugin version? CODESYS version is not enough information since modularisation.
Last updated: 4 days ago

Post by blisk2000 on Scheduler ^{CODESYS Forge talk (Post)}
Hi, I am looking for a scheduler like attached picture. Is a scheduler like this already available in Codesys? Thank you! Best regards! Zdenko
Last updated: 2026-01-16

Post by wollvieh on Sysfile Konfiguration ^{CODESYS Forge talk (Post)}
Hier noch ein schönes Beispiel für $$PLCLogic$$. https://support.enovationcontrols.com/hc/en-us/articles/29453251586451-Codesys-Example-File-Storage
Last updated: 2026-01-20

Post by antonio011 on Request a dark mode for CODESYS ^{CODESYS Forge talk (Post)}
Any updates on this? A dark mode is in most IDE state of the art already.
Last updated: 2026-01-21

Post by eschwellinger on cm4 runtime problem ^{CODESYS Forge talk (Post)}
no - you need to update, smallest impakt is just to install the debiab package on target side. Nothing else ( no updates in CODESYS)
Last updated: 2026-02-02

Post by winki on Error in licence activation ^{CODESYS Forge talk (Post)}
I am using Codesys Control for linux ARM64 SL. Installed with the SL deployment tool
Last updated: 2026-02-03

Post by eschwellinger on Codesys ControlWinV3x64 with EtherCat Slave ^{CODESYS Forge talk (Post)}
please check the plclog for more information. sounds like NPCap does not work.
Last updated: 2026-02-04

Post by russells on Codesys ControlWinV3x64 with EtherCat Slave ^{CODESYS Forge talk (Post)}
Much thanks. I reinstalled NPCap and it is now working. Much thanks.
Last updated: 2026-02-05

Post by dosnova on *exception* [processorloadwatchdog] occurred in: app=[all], task=[all] ^{CODESYS Forge talk (Post)}
Weintek Codesys firmware update does not solve this problem..
Last updated: 2026-02-10

Post by nano on CODESYS and Github Copilot ^{CODESYS Forge talk (Post)}
your Project is allways written in st? then have a look at the FBS from PDE. schould solve parts of the job
Last updated: 2026-02-11

Post by eschwellinger on Control for Linux ARM64-User Management issue ^{CODESYS Forge talk (Post)}
guess you'll need to use latest CODESYS version to fix this.
Last updated: 2026-02-14

Post by heman on AI + Programming ^{CODESYS Forge talk (Post)}
have a look at www.plc-assist.com ...think it does what you are looking for
Last updated: 2026-04-27

Post by kevintumibay on Struggling to connect to EK1100 to Raspberry Pi ^{CODESYS Forge talk (Post)}
SUMMARIZED VERSION OF QUESTION: I'm trying to connect a Raspberry Pi running "Codesys Control for Raspberry Pi" to a Beckhoff EK1100, unfortunately, when I try to connect I get the following messages SEE FIRST PICTURE DETAILED VERSION OF QUESTION: Hi everyone, I'm a college student that is super interested in learning about PLCs. I wanted to dive into the subject and decided to follow this great Instructables article: https://www.instructables.com/Programming-Raspberry-Pi-With-CODESYS/ Thank you in advance for your help! My current setup is as follows: 1. I have Codesys Control for Raspberry Pi, version 4.14.0.0, (https://store.codesys.com/en/codesys-control-for-raspberry-pi-sl.html) installed on a Raspberry Pi 3B. 2. I am using my smartphone hotspot to create a network. 3. I have CODESYS 3.5 SP21 (64 bit) installed on my Windows 11 laptop. 4. Both the Raspberry Pi and my laptop are connected to the smartphone hotspot network (I am wirelessly connecting to the Raspberry Pi). Connecting to the Raspberry Pi from CODESYS on my laptop: 1. I launch Codesys Installer -> I install Codesys Control for Raspberry Pi (link to the software). 2. I launch Codesys 3.5 SP21 (64 bit) on my laptop. 3. I go to file --> new project --> standard project --> in the pop-up I select "Codesys Control for Raspberry Pi" and "Structured Text" 4. I click on tools -> Deploy Control SL (on older versions of Codesys you would click on "update Raspberry Pi", I got that information from this video: link) 5. Inside Deploy Control SL --> I go to the "communication" menu and I input the IP address of my Pi, the password, and click on connect. 6. Inside Deploy Control SL --> I go to the "deployment" menu and I install Codesys Control for Raspberry Pi SL and Codesys Edge Gateway for Linux 7. Now I double click on "device" in the left hand tree and put in the IP address of my Raspberry Pi and click on connect --> success! I am able to connect! SEE SECOND PICTURE Powering the EK1100 and connecting it to the Raspberry Pi: 1. I am supplying the EK1100 with 24 V across the + and - pins. 2. I have jumper wires going from the + pin to the 24V pin and from the - pin to the 0V pin. SEE THIRD PICTURE 4. I am pretty confident that the EK1100 is receiving power because the "LED Us 24 V" and "LED Up 24 V" are lighting up. 5. I then run an ethernet cable from the EK1100 to the Raspberry Pi port (the Raspberry Pi is connected to my laptop wirelessly over WiFi). I think this connection should also be good since the LINK/ACT LED lights up. Trying to connect to the EK1100: 1. Back in Codesys I right-click on "Device" in the left tree and then in the pop up I click on "add device". 2. I then click on EtherCAT Master. 3. Next in a terminal window I SSH into the raspberry Pi and run the "ifconfig" command. 4. From there I get the MAC address for eth0 --> in my case: b8:27:eb:29:a9:25 5. Then, back in Codesys I double click on "EtherCAT Master" in the left hand tree. I then paste the MAC address into the "Source Address (MAC)" field. 6. I go to the Beckhoff official website and download the XML files for EtherCAT: https://www.beckhoff.com/en-en/products/i-o/ethercat-terminals/ek1xxx-bk1xx0-ethercat-coupler/ek1100.html? 7. I unzip those files in my computer into some folder that I can remember. 8. Back in Codesys I click on "Tools" --> "Device Repository" --> "Install" --> and then on the "Beckhoff EK11xx.XML" file. 9. In theory the necessary XML file is now installed. 10. THIS IS WHERE I RUN INTO THE PROBLEM: I then click on login --> I right click on EtherCAT_Master and then scan for devices --> and nothing. 11. It just doesn't detect it. On top of this whenever I login I get those orange triangles on the left on my tree. When I check the Log I get the messages at the very first screenshot of this post. SEE FOURTH PICTURE Solutions that I have tried to resolve this problem: 1. I thought it was maybe the .XML file so I installed all the .XML files from the EtherCAT folder that I downloaded. That didn't fix it. 2. I went on the Wayback Machine and got the .XML files from 2018 as I thought maybe an older version would work. This file of EtherCAT folders had a .XML file named "Beckhoff EKxxxx.XML" I thought this would work because that's the name of the file the guy in the Instructables used (https://www.instructables.com/Programming-Raspberry-Pi-With-CODESYS/). That didn't do anything. 3. I ran the PLC on my computer instead of the Raspberry Pi and tried to connect to the EK1100, in case the issue was with the Raspberry Pi, but I still ran into the same error from the picture above: "Attention! The device was not found in the repository. Vendorcode: 0x0. Productcode: 0x0. Revision: 0x0". SEE FIFTH PICTURE 4. I reinstalled Codesys, I was originally on version 3.5 SP20 when I did this, I upgraded to 3.5 SP21 with no success. 5. I then thought the solution might be to first add the EK1100 hardware before connecting so I did the following: 6. Right click on "EtherCAT Master" on the left hand tree --> then click on "add device" --> then I added the "EK1100 EtherCAT Coupler (2A E-Bus)" MY THEORY OF WHAT IS CAUSING THE PROBLEM: I asked ChatGPT for help and it said that it might have something to do with the revision number. On the physical EK1100 it says "Rev. Nr.: 0018". I believe that this means that I need to a revision 0018 XML file but if you look in Codesys it says the version is 16 (picture above). This is confusing because I got my .XML file from the official Codesys website so it should be the most up to date version possible. I searched and I searched and I couldn't find a version 18 .XML file, I don't even now if this exists. Any help you can provide is greatly appreciated, I don't know what to do anymore and I really really want to get this working. Thank you!
Last updated: 2025-03-30

Problems working with IScriptModuleRepository.add_reference_instance Method ^{CODESYS Forge talk (Thread)}
Problems working with IScriptModuleRepository.add_reference_instance Method
Last updated: 2023-08-17

wed visu im IFM display CR1077 ^{CODESYS Forge talk (Thread)}
wed visu im IFM display CR1077
Last updated: 2023-08-18

Sorting array of any-sized structure ^{CODESYS Forge talk (Thread)}
Sorting array of any-sized structure
Last updated: 2023-08-18

Find index based on values ^{CODESYS Forge talk (Thread)}
Find index based on values
Last updated: 2023-08-20

Find index based on values ^{CODESYS Forge talk (Thread)}
Find index based on values
Last updated: 2023-08-20

Post by hugob on Start Control Win Softmotion Runtime ^{CODESYS Forge talk (Post)}
Last updated: 2023-08-23

Start Control Win Softmotion Runtime ^{CODESYS Forge talk (Thread)}
Start Control Win Softmotion Runtime
Last updated: 2023-08-23

Warnung C0373 / Dialog nicht instanziert ^{CODESYS Forge talk (Thread)}
Warnung C0373 / Dialog nicht instanziert
Last updated: 2023-08-29

Symbol Configuration, I'm doing it wrong ^{CODESYS Forge talk (Thread)}
Symbol Configuration, I'm doing it wrong
Last updated: 2023-08-31

Post by eschwellinger on Code Size ^{CODESYS Forge talk (Post)}
see here:
Last updated: 2023-09-07

Sort by relevance or date