Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by chrisdeloglos on Network Variables not updating ^{CODESYS Forge talk (Post)}
Thanks for the comment. I'm using Weidmueller UC20-WL2000-AC's and changing the broadcast address to match the current subnet this worked for me as well!
Last updated: 2025-01-27

Post by timvh on an not create Symbol Configuration in Codesys V3.5 SP20 Patch 4 ^{CODESYS Forge talk (Post)}
Go to the menu Tools - CODESYS Installer. Here you can manage your add-on packages. Go to Browse, find CODESYS Communication and install this add-on.
Last updated: 2025-03-08

Post by julian123 on CodeSysControlWinV3x64 ^{CODESYS Forge talk (Post)}
Hello mos89p, I had the same problem. There is a lot of threads about this, but not one up to date. Your solution worked and I was finally able to use my software again. Thank you!
Last updated: 2025-03-12

Post by r-c-r on SM3RaspiStepper 0.0.0.6 issue ^{CODESYS Forge talk (Post)}
Thanks for the replay. My RPI is a 3B+ model with bullseye OS. I don't understand why 0.0.0.4 is working ok and future versions not.
Last updated: 2025-03-22

Post by ton on Length of string and Array of bytes ^{CODESYS Forge talk (Post)}
When you use a string value 0 will be the end terminator. Everything after this will not be in the string. I guess byte 2394 has a value 0.
Last updated: 2025-04-01

Post by abuckie on i2c master not running ^{CODESYS Forge talk (Post)}
Thank you. I didn't realize it wasn't enabled for the Pi as a whole. I enabled i2c in the terminal and things are working now.
Last updated: 2025-05-20

Post by nxbp on Cam Editor And Cam Problem ^{CODESYS Forge talk (Post)}
I Created cam with 361 cam points ( 0,1,2.....360 ). The values in the Cam_A array do not match the Cam points entered in the Cam editor.
Last updated: 2025-06-22

Post by tk096 on Cam Editor And Cam Problem ^{CODESYS Forge talk (Post)}
Hi, in the XYVA compile format the editor is adding an additional point if the derivatives are jumping at this point. However, this should not change the path?
Last updated: 2025-06-30

Post by matt8m8 on CODESYS Installer does't open ^{CODESYS Forge talk (Post)}
Hello, I have similar issue - installed CODESYS 64 3.5.21.10 on clean Win10 VM (virtualbox). Windows defender switched off, no additional antivirus. Codesys installer not starting (normal user and admin). No errors displayed. Windows event log screen in attachment.
Last updated: 2025-08-02

Post by jonasz on TargetVisu not accepting touch inputs ^{CODESYS Forge talk (Post)}
So, in my case, the solution is to uncheck the option to support client animation and overlay native elements. Visualisation Manager -> Settings -> General Settings
Last updated: 2025-08-19

Post by timvh on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
In the device selection. Do not filter on Phoenix. Remove this filter and first add an Ethernet Adapter from CODESYS. To this Ethernet adapter add the Profinet Controller. After this you can filter on Phoenix devices in the "add device dialog".
Last updated: 2025-09-09

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
add the Container serial number this is usually 130-xxxxxxxx and last row the license ticketnumber which you got from the CODESYS Store order
Last updated: 2025-10-01

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
the procedure is usually 1. install the Licenserver (on the host) with the deploy tool in CODESYS) 2. if you go to the CODESYS WBM you should see an empty Softcontainer 130-xxxxxx 3. activate the license with SoftContainer number and ticketnumber that was it!
Last updated: 2025-10-01

Post by hoptopgunhop on IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Post)}
I am using TX700s as a communication device with S7-1200 and am having the same problem. Can anyone help me solve this problem.
Last updated: 2025-10-05

Post by hoptopgunhop on IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Post)}
I am using TX700s as a communication device with S7-1200 and am having the same problem. Can anyone help me solve this problem.
Last updated: 2025-10-05

Post by abjha1998 on Converting UINT into bytes and converting 2Bytes into UINT ^{CODESYS Forge talk (Post)}
Thank you for the reply. I got an error saying that MEM.PackBytesToWord(GVL.Actual_Speed_DUT_high,GVL.Actual_Speed_DUT_low) = u; is not a valid statement. Am I missing some library?
Last updated: 2023-12-08

Post by abjha1998 on Converting UINT into bytes and converting 2Bytes into UINT ^{CODESYS Forge talk (Post)}
Thank you for the reply. I got an error saying that MEM.PackBytesToWord(GVL.Actual_Speed_DUT_high,GVL.Actual_Speed_DUT_low) = u; is not a valid statement. Am I missing some library?
Last updated: 2023-12-08

Post by fransh on WAGO PFC200 FW25 unable to connect ^{CODESYS Forge talk (Post)}
Hi I set up my WAGO PFC200 controller and am unable to connect to the processor. Gateway is set to local host. I can connect to the unit with the WAGO Web Based management but not with Codesys V3.5 SP18.5. Any suggestion?
Last updated: 2023-12-09

Post by trycyclepower on How to transfer data from DINT to Union(16 Bools) which I need to use in Few FBs ^{CODESYS Forge talk (Post)}
I have DINT data from drive input and would like to use this data in Bools in bunch of the FBs. I have tried using Union but it is not working. Please suggest
Last updated: 2023-12-14

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
I have now renamed my recipe to Parameter and now use SaveRecipeAs. The correct folder is displayed in the dialogue box, but the recipe is not saved. What could be the reason for this, write permissions? Recipe manager buggy?
Last updated: 2023-12-29

Post by atone on System Date and Time Function ^{CODESYS Forge talk (Post)}
SysTimeRtcConvertUtcToLocal is marked as obsolete, but there's not hint on the actual implementation. Which function should I use instead? Edit: even the new online help is still using SysTimeRtcConvertUtcToLocal as example...
Last updated: 2024-01-05

Post by eschwellinger on function block output ^{CODESYS Forge talk (Post)}
not sure on which plc you are - there might be the option with: https://forge.codesys.com/drv/sm3raspistepper/home/Home/ but it is more or less Pi restricted and need additional hardware too I guess.
Last updated: 2024-01-09

Post by matthew on New Ladder Diagram conversion does not work due to missing features ^{CODESYS Forge talk (Post)}
Thanks for the update, Since you can't double click is there another way to enter the FB when online and see the running code of that instance? When can we expect to see v1.0?
Last updated: 2024-01-31

Sort by relevance or date