Post by manuknecht on Using an Axis of an Axis Group in Torque Conctrol ^{CODESYS Forge talk (Post)}
I don't seem to be able to use an axis, which is part of an Axis Group in torque control mode. I call the SMC_SetControllerMode FB to switch from position to torque control mode, followed by the SMC_SetTorque FB to set the desired torque. This works flawlessly for most axes, however if an axis is part of an axis group, switching the controller mode seems to work without any issues, but the desired torque is never set. SMC_SetTorque does not return an error, but fSetTorque of the axis is never changed. Disabling the axis group before does not change anything, but if I use MC_UngroupAllAxes before changing the controller mode, it all works as it should. Is there no way to control a single axis in torque control, if it is part of an axis group?
Last updated: 2025-07-17

Post by comingback4u on Memory Address Overlap ^{CODESYS Forge talk (Post)}
Hello, We use a controller that comes with a bunch of predefined faults. These faults are considered active and historic. They are a 32 byte array but only take up 26 bytes of data. Because of this the historic faults start at address 26 instead of 31. Active faults variable take up address location 0 to 31. Historic faults variable take up address location 26 to 57. Because of this overlap I get an error that these overlap and it wont allow me to download to my controller. This isn't an issue in 3.5.5.4 but becomes an issue in newer version. Is there a way to turn this off? If I change the address location, the historic faults then become broken without doing some manipulation in the code. The software will build just fine. Thank you for your time.
Last updated: 2024-03-07

Post by dhumphries on Minimum system requirements for codesys control standard S ^{CODESYS Forge talk (Post)}
I'm working on a low cost project and I'm considering installing the Codesys runtime on a PC running Linux Debian instead of buying a PLC with a pre-installed runtime. For my needs the Control Standard S license should be capable of running some IO over ethernet/ip, and a webvisu. The PC I am considering has a AMD GX-424CC 2.4GHz processor (4 core/4 thread) and 4GB RAM. This may compare to a raspberry pi4, but I know an X86 processor doesn't directly compare to an ARM processor, and a processor can have a high clock speed but other factors like L2/L3 cache can influence the overall performance. I can't find any published specs for the processor and RAM requirements to run the Codesys Control runtime, does anybody have a link to the minimum system requirements or experience using devices that are at or below the minimum system requirements. A raspberry pi with the control for raspberry pi SL runtime license would be the lowest cost option, but the license is not for commerical use. This restriction is somewhat vague, can anybody clarify if this means I can use a raspberry Pi runtime for in-house automation, what about if I am selling an integrated system that uses a raspberry Pi as a controller?
Last updated: 2023-12-25

Post by cdutz on Problems connecting to Codesys 4.9.0.0 runtime on my Wago PFC200 ^{CODESYS Forge talk (Post)}
Turns out I managed to get a connection to my PLC. It seems that a few weeks ago Wago released something with version 4.3.3(25). So I reset my PLC to Factory-Reset, set it to the 192.168.1.17 IP and changed the IP to the one I wanted with the Wago EthernetSettings tool. Then updated the latest firmware using the WAGOupload tool. Now the PLC came back up without a PLC runtime running, so in the Web-tool I wen't to the "Configuration"/"PLC Runtime" and selected the runtime version "CODESYS V3". I uninstalled all Codesys versions and installed the version from the download package of Wago together with all the packages the bundle provided. After creating a new project I didn't select the old PFC200 runtime, but one of the dozens of new device profiles, that it now listed. With these settings I was then able to connect to my PLC. Now I hope I'll get the existing project that I had ported to this new structure. Sorry for the noise. Chris
Last updated: 2023-08-26

Post by timvh on Visuutils FbOpenDialog(Extended) not open Dialog from POUs ^{CODESYS Forge talk (Post)}
I had a similar situation recently where this didn't work, but read to the end to see the solution. The reason is that CODESYS only downloads visualisations (dialogs) if they are part of the project or linked to the project. In your case the dialog is not loaded onto the controller. But the solution is pretty simple: Double click on the Visualization Manager in your application. Select the Tab "Visualizations". Here you can see that your dialog is not "checked". Do this manually and load your project on the controller. Then your code should be able to open the dialog, because now it exists on the controller.
Last updated: 2024-09-28

Post by pernockham on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
Am I alone in this? Is this a known fault? Should I look for the reason of the lacking update option for "Control for linux SL" in my system or is it a potential fault in the codesys system?
Last updated: 2026-02-17

Post by martinlithlith on CODESYS Control for Raspberry Pi SL on Raspberry Pi 4b ^{CODESYS Forge talk (Post)}
Hi! Thanks for your reply! I'll have a go then!
Last updated: 2023-09-06

Extended Alarm description for a alarm selected in Alarm Table ^{CODESYS Forge talk (Thread)}
Extended Alarm description for a alarm selected in Alarm Table
Last updated: 2024-07-16

Temu Coupon Code Oklahoma {USA} ⥤ ["^acr900074^"] for New App Users ^{CODESYS Forge talk (Thread)}
Temu Coupon Code Oklahoma {USA} ⥤ ["^acr900074^"] for New App Users
Last updated: 2024-10-25

Temu Coupon Code Maryland {USA} ➩ ["^acs615756^"] for New App Users ^{CODESYS Forge talk (Thread)}
Temu Coupon Code Maryland {USA} ➩ ["^acs615756^"] for New App Users
Last updated: 2024-10-25

Temu Coupon Code Nevada {USA} ⤁ ["^acs900074^"] for New App Users ^{CODESYS Forge talk (Thread)}
Temu Coupon Code Nevada {USA} ⤁ ["^acs900074^"] for New App Users
Last updated: 2024-10-25

Temu Coupon Code California {USA} ⇻ ["^act900074^"] for New and Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code California {USA} ⇻ ["^act900074^"] for New and Existing Customers
Last updated: 2024-10-25

Temu Coupon Code Idaho {USA} ➔ ["^act900074^"] for New App Users ^{CODESYS Forge talk (Thread)}
Temu Coupon Code Idaho {USA} ➔ ["^act900074^"] for New App Users
Last updated: 2024-10-25

Temu Coupon Code Illinois {USA} ➟ ["^ack887223^"] for New and Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code Illinois {USA} ➟ ["^ack887223^"] for New and Existing Customers
Last updated: 2024-10-26

Temu Coupon Code $120 off ➥ [[acj903114 "OR" acs582105]] for Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code $120 off ➥ [[acj903114 "OR" acs582105]] for Existing Customers
Last updated: 2024-10-26

Temu Coupon Code $120 off ➥ [[aci950762 "OR" acu543935]] for Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code $120 off ➥ [[aci950762 "OR" acu543935]] for Existing Customers
Last updated: 2024-10-26

Temu Coupon Code Alabama {USA} → ["^act796165^"] for New and Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code Alabama {USA} → ["^act796165^"] for New and Existing Customers
Last updated: 2024-10-26

Temu Coupon Code 40% off ➥ [[ach705378 "OR" acu657068]] for New App Users ^{CODESYS Forge talk (Thread)}
Temu Coupon Code 40% off ➥ [[ach705378 "OR" acu657068]] for New App Users
Last updated: 2024-10-26

Temu Coupon Code 50% Discount╰┈➤ [[ack828833 "OR" acr610631]] for Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code 50% Discount╰┈➤ [[ack828833 "OR" acr610631]] for Existing Customers
Last updated: 2024-10-26

Temu Coupon Code 40 Off ➥ [[ack889447 "OR" act661415]] for First-time Users ^{CODESYS Forge talk (Thread)}
Temu Coupon Code 40 Off ➥ [[ack889447 "OR" act661415]] for First-time Users
Last updated: 2024-10-26

30% off ➤ Temu Coupon Code [[acq717533 "OR" frd266077]] for New and Existing Customers ^{CODESYS Forge talk (Thread)}
30% off ➤ Temu Coupon Code [[acq717533 "OR" frd266077]] for New and Existing Customers
Last updated: 2024-10-26

50% off ➥ Temu Coupon Code [[acq866328 "OR" frp414131]] for Existing Customers ^{CODESYS Forge talk (Thread)}
50% off ➥ Temu Coupon Code [[acq866328 "OR" frp414131]] for Existing Customers
Last updated: 2024-10-26

Temu Coupon Code $100 off╭⁠☞ [[acu782896 "OR" acs546758]] for New Users (Free Shipping) ^{CODESYS Forge talk (Thread)}
Temu Coupon Code $100 off╭⁠☞ [[acu782896 "OR" acs546758]] for New Users (Free Shipping)
Last updated: 2024-10-26

Temu Coupon Code $50 off╭⁠☞ [[act725288 "OR" acr620545]] for New and Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code $50 off╭⁠☞ [[act725288 "OR" acr620545]] for New and Existing Customers
Last updated: 2024-10-26

Temu Coupon Code 30% off ➥ [[acq852781 "OR" act513469]] for Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code 30% off ➥ [[acq852781 "OR" act513469]] for Existing Customers
Last updated: 2024-10-26

Sort by relevance or date