Post by sangeetnenwani on Test Driver Availability in CODESYS 64-bit and Test Manager 5.1.0.0 ^{CODESYS Forge talk (Post)}
I’m operating with CODESYS in a 64-bit configuration and the Test Manager at version 5.1.0.0, where I’m attempting to use project scripts from an earlier version. These scripts call for certain test drivers that are not present in my installation. It’s unclear whether the absence is due to the 64-bit system, an update in the test drivers, or if I need to enable or install additional elements. For instance, the loadproject(Codesys.Base) command is missing, but loadproject(testmanager.project) is available. The FileIO command for CODESYS isn’t accessible, yet the testmanager’s driver for it exists, as does the execuptscript command.
Last updated: 2024-08-06

Post by sangeetnenwani on Test Driver Availability in CODESYS 64-bit and Test Manager 5.1.0.0 ^{CODESYS Forge talk (Post)}
I’m operating with CODESYS in a 64-bit configuration and the Test Manager at version 5.1.0.0, where I’m attempting to use project scripts from an earlier version. These scripts call for certain test drivers that are not present in my installation. It’s unclear whether the absence is due to the 64-bit system, an update in the test drivers, or if I need to enable or install additional elements. For instance, the loadproject(Codesys.Base) command is missing, but loadproject(testmanager.project) is available. The FileIO command for CODESYS isn’t accessible, yet the testmanager’s driver for it exists, as does the execuptscript command.
Last updated: 2024-08-06

Post by zatalian on Visualization Toolbox in German ^{CODESYS Forge talk (Post)}
Is there a solution for this problem? Same here where the OS language was french during the installation of codesys (SP20 Patch2)
Last updated: 2024-09-26

Post by bjarne-pagaard on OPC UA Server Status on Win RTE ^{CODESYS Forge talk (Post)}
The Control RTE is 3.5.18.20, using the symbol configuration for exposure of variables.
Last updated: 2024-10-22

Post by sigurdrb on How to change OPC NodeId IdentifierType ^{CODESYS Forge talk (Post)}
Did you find a solution for this? Experiencing the same when I'm setting up the server using "Communicartion manager"
Last updated: 2025-01-20

Post by ben1 on Trying to connect Codesys OPC server to Ignition ^{CODESYS Forge talk (Post)}
The server doesn’t allow anonymous users. You need to configure a username/password for the connection.
Last updated: 2025-01-21

Post by timvh on TargetVisu started in windowed or not full screen ^{CODESYS Forge talk (Post)}
Take a look at the following for the possible location: https://forge.codesys.com/forge/talk/Runtime/thread/7959e0c66c/#618c
Last updated: 2025-02-26

Post by eschwellinger on Beckhoff EL6652-0010 with Codesys ^{CODESYS Forge talk (Post)}
this is not supported - no config pages available for this. Why not just use the EIP on your NIC of the plc?
Last updated: 2025-03-21

Post by eschwellinger on CODESYS Installer does't open ^{CODESYS Forge talk (Post)}
please check the windows event log for errors. Try to install it again from the CODESYS store. stanalone setup CODESYS installer
Last updated: 2025-04-01

Post by pernockham on Control for linux SL, 4.14.0.0 -> 4.15.0.0 breaks web page access. URL requires authentication ^{CODESYS Forge talk (Post)}
I have a problem which I have identified with a device-update from 4.14.0.0 to (4.15.0.0-4.17.0.0) where the newer versions will stop any local access to the internal web page with the browser responding "The requested URL requires authentication". Setting the device back to 4.14.0.0. the web page will respond. Access to web page through Automation server is possible also for the newer version, but not "local" access. Runtime (Codesys control for linux SL) is on 4.17.0.0. I have tried to manipulate settings for 'Access-Control-Allow-Origin' '*' always; through nginx (normally a proxy_pass to localhost:8080). Also tested bypassing nginx by accessing 8080 directly with the same result.
Last updated: 2025-09-08

Post by eschwellinger on Error while using UpdateConfiguredIPSettings to change IP address ^{CODESYS Forge talk (Post)}
check the plclog for the error on doing this
Last updated: 2023-12-12

Post by thomasrohnerch on Access to the path *** is denied ^{CODESYS Forge talk (Post)}
yes, this is working fine. for the moment this is acceptable.
Last updated: 2024-02-07

Post by dkugler on Direct Pointers in IOMapping for EtherCAT with IoDrvEthercatLib.ETCSlave_Dia ^{CODESYS Forge talk (Post)}
rmaas: how do you get the reference of the slave?
Last updated: 2024-02-13

Post by rckalex on Codesys v3.5 on WAGO 750-8202 ^{CODESYS Forge talk (Post)}
You can use C3.5 by using the 3S firmware on the 8202 https://us.store.codesys.com/codesys-control-for-pfc200-sl-1.html
Last updated: 2024-03-07

Post by rckalex on Codesys v3.5 on WAGO 750-8202 ^{CODESYS Forge talk (Post)}
You can use C3.5 by using the 3S firmware on the 8202 https://us.store.codesys.com/codesys-control-for-pfc200-sl-1.html
Last updated: 2024-03-07

Post by xiaonyan on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Thanks for the reply. so where can i get this help from...the new post or link....where can i find it
Last updated: 2024-05-17

Post by zer0g on Modbus Client Request Not Processed ^{CODESYS Forge talk (Post)}
Hi, Thank you for your suggestion but the problem is fixed after I disabled and enabled the network adapter from Windows settings.
Last updated: 2024-05-30

Post by dwoodlock on Raspberry PI 5 not working ^{CODESYS Forge talk (Post)}
I suffer the crash issue also, will try this tonight, thanks for the info @eschwellinger
Last updated: 2024-06-10

Post by eschwellinger on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
it is supported for sure, send me the link the outdated webpage please.
Last updated: 2024-06-14

Post by eschwellinger on Adding a Softmotion License to a Weintek HMI ^{CODESYS Forge talk (Post)}
You need to ask Weintek if they support the licensing. For Softmotion the device should be realtime capable.
Last updated: 2025-10-17

Post by nguyenkhoi on Estun servo with codesys ^{CODESYS Forge talk (Post)}
Have you found it yet? I'm also searching for the EtherCat file config about the Estun Pronet Servo.
Last updated: 17 hours ago

Post by egau on Enable and Disable Project IO programmatically ^{CODESYS Forge talk (Post)}
Hi @eschwellinger, I tried this with Modbus COM slaves. I was able to disable them (slave becomes greyed out in the device tree), but the DED.Reconfigure "eError" output shows "NOT_SUPPORTED". After this, when I tried to re-enable the slave, it did not work (device stayed greyed out in the device tree), and the DED.Reconfigure "eError" output also showed "NOT_SUPPORTED". Is there something to do about this, or the device just doesn't support reconfiguration? P.S: I tried this running locally on my computer (not in simulation mode). So of course I was not physically connected to the devices. I have two similar projects, but one of them doesn't have the Modbus_COM devices. I know I can "Exclude from build" the devices for that project, but I would really prefer not to do this if possible. I would prefer to dynamically toggle a configuration variable that would enable or disable the slaves.
Last updated: 2025-03-14

Post by tama00 on GPIOs not running with Raspberry Pi 4 (and SPI connection) ^{CODESYS Forge talk (Post)}
Hello everyone, I have a working SPI connection (with transferExt) between a Raspberry master with Codesys and an ESP32 slave. I would also like to use a few GPIO pins. Is there a problem with using SPI AND GPIOs? Environment: Raspberry Pi 4+ with Raspian from Oct 23 Codesys V3.4 SP19 Patch 5 with Runtime Version 4.10.0.0 Device: GPIOs B+/Pi2 My problem: The status is displayed as “GPIOs : not running”. And also during mapping the message “The bus is not running. The values shown are perhaps not actual”. However, the variable changes that I make in my program are displayed under “Current Value”. In the Logic Analyzer, the pin toggles during transmission with small intervals of +-4us (seems to be a cyclical disorder, but I don't know where exactly it could be coming from). This applies to pins that I actually use (output) but also to the other GPIOs (not used). With GPIO 4, the line remains permanently high. Attached is a screenshot from the Logic Analyzer. Channel 1,3,5 were GPIO pin 26, 22, 17 Would be very grateful for help. Best regards
Last updated: 2024-05-06

Post by phoward131 on Alarm Table Filtering ^{CODESYS Forge talk (Post)}
I am having trouble getting the alarm table filtering to work. I downloaded the alarm filter latch example project and ran it on the local Codesys Control Win and the filters worked fine. I am trying to replicate it in my project and everything seems to be set up the exact same way and every time I turn on the filter, it shows no alarms. I even started a blank project and just copied in elements from the example project so that it is exactly the same and when I attempt to filter, it again shows no alarms. Could there be some project settings I need to adjust to make this work? I have attached my project with elements copied from the example project and filtering is not working.
Last updated: 2024-10-28

Post by l-lll on The plug-in is required by the current version profile but has not been installed ^{CODESYS Forge talk (Post)}
Hello everyone, I meet this problem after installing Codesys SP20 Patch 5 on Windows 11 while the dialog box shows that the installation process has been successfully completed. Every time I open Codesys I get an error that says (Attached image): 'One or more issues ocurred with the current version profile. Please contact the vendor to resolve these problems. The plug-in {....} (Exactly x.x.x.x) is required by the current version profile., but has not been installed. It is highly recommended that the tools is terminated. Do you wanto to terminate now?' Can someone help me please, thanks very much！
Last updated: 2025-05-14

Sort by relevance or date