Post by mariacugnier on Equal Objects at Unstaged Changes - Git (Codesys Pro) ^{CODESYS Forge talk (Post)}
I'm having a serious issue with codesys-pro/git, because everytime I load my project I get around 40 unstaged changes with equal objects. If I only commit everything along with my real changes I strugle to locate them later. I've tried creating a new git repository, it didn't work. I've commited everything, it kept appearing. I've tried rolling back everything but it also didn't work. Does anyone know why this happens and how to manage it?
Last updated: 2025-05-20

Post by nz-dave on Codesys 3.5.21 fails to copy file to USB ^{CODESYS Forge talk (Post)}
i had a similar problem trying to send files to C: on local computer. Ended up using Oscat ftp to transfer file with filezilla. i read there is an "write protection", possibly to do with windows, issue with sp19 and up. there are some config files in the codesys dir you can change, which may help. after i was able to transfer to local PC\downloads but not c: so went the ftp route. works well. https://forge.codesys.com/forge/talk/Runtime/thread/5cac1390b4/
Last updated: 2025-05-26

Post by dhumphries on codesys installer deletes itself instead of updating ^{CODESYS Forge talk (Post)}
I'm using the 64 bit version of the engineering software, but the codesys installer seems to be 32 bit. im trying to use the installer to manage my installations but when I open it with admin privelages it starts an automatic update immediately then deletes itself. I don't know how else to explain this. This isn't a repository problem, or a problem with the engineering software, it is a problem with the installer.
Last updated: 2026-08-11

Post by appling on License status of Linux 64Bit runtime via CLI ^{CODESYS Forge talk (Post)}
Hi, I have a Linux 64Bit system with a Codesys application running on it. It stops after 2hours and a few minutes, which makes me think something is wrong with the installed license. (in my last timing it stopped after 2h4min, on the codesys website it is stated that runtimes without a license stop after 2h) I installed the license via a USB license dongle that I activated on my workstation with the Codesys IDE a while ago. Now the system is shipped at not accessible physically, only remotely via SSH. So is there a way to check the status of the License of the Codesys runtime when it is running on the system? Running the codesyscontrol script with "status" just tells me that it is running, but does not provide any license information. Best regards
Last updated: 2023-12-04

Post by idalu on Profinet PN_Controller Issue, Network Adapter ^{CODESYS Forge talk (Post)}
i have a problem with Profinet on my project. I'm using Codesys RTE 3.5.19.50. When i download program to controller the ethernet is ok, PN_Controller is ok but every device i'm trying to connect is red with error "DCP no RealStationName". When i'm trying to Scan for Devices on PN_Controller there are no devices found. I have installed Codesys driver CmpEt1000Drv to my network adapter (i'm sure it is right intel pro 1000 model). I have noticed that when i installed codesys driver i'm no longer able to ping this network adapter (i can ping it when intel driver is installed). On my previous projects with runetimes i can ping it even with codesys driver installed. I have also tried to do downgrade of everything to version 3.5.19.20 and it not helped.
Last updated: 2024-01-17

Post by valenting on Runtime not working on raspberry pi Bullseye ^{CODESYS Forge talk (Post)}
Hello I have a problem with Codesys on Raspberry pi with Bullseye The device is not recognized as a Raspberry pi, as I get this error : ooops... this runtime was built for RASPBERRYPI. Hardware version or firmware version not supported! (-18, 0x00000BB8, 0xFFFFFFFB) I'm running Codesys on a compute module 4S with Raspbian GNU/Linux 11 (bullseye), my kernel version is Linux 5.10.90-v7l+ Codesys version is the latest, released last week (4.11.0.0, CODESYS Control V3.5.19.61 for ARM-32Bit - build Feb 22 2024) I know it works on the same device if I use Raspbian 10 (Buster) with Linux 5.4.81-v7l+ kernel, but for some other reasons I have to use Bullseye. What can I do ?
Last updated: 2024-03-01

call codesys v2.3 from CoDeSys v3 ^{CODESYS Forge talk (Thread)}
call codesys v2.3 from CoDeSys v3
Last updated: 2017-06-13

Codesys 2.3 to Codesys 3.5 ^{CODESYS Forge talk (Thread)}
Codesys 2.3 to Codesys 3.5
Last updated: 2022-06-09

CODESYS HMI CODESYS V2.3 / Windows10 ^{CODESYS Forge talk (Thread)}
CODESYS HMI CODESYS V2.3 / Windows10
Last updated: 2016-06-12

Post by landhen on Codesys HMI with a non codesys programmed controller ^{CODESYS Forge talk (Post)}
Hello, I would like to know, if it is possible to use codesys for a visualization of parameters in a controller (not PLC) not programmed using Codesys. I intend to use codesys for the visualiztion, and do not know yet what I may require.
Last updated: 2024-02-21

Post by tanman19 on How to Use Personal Access Tokens from GitHub with Codesys Git ^{CODESYS Forge talk (Post)}
I am trying to push changes to a GitHub repository. I set up the Git Remote with the correct URL and committed the change. When I push the change it asks for my GitHub credentials which I know are correct, when I type in my username and password it gives me an error: "The provided credentials seem incorrect." So I tried putting in my Person Access token and when I put that in with my username I get this error: "The server request failed and returned a HTTP error code 403: Forbidden". Does anyone know how to correctly use Personal Access Tokens from GitHub with Codesys Git? Does it have to do something with the remote url or my username? Any help or guidance would be appreciated.
Last updated: 2023-09-28

Post by c3po on SNMP Communication with WAGO 750-8212 PFC ^{CODESYS Forge talk (Post)}
Hello folks, my problem is a bit bigger for just one question. So let's start with the easiest. But first, my system setup: It's a WAGO 750-8212 PFC with some I/O-modules. I try to communicate with the controlsystem over SNMP using the IIoT library from codesys. https://content.helpme-codesys.com/de/CODESYS%20Examples/_ex_iot_snmp_service.html Is there some expirience with this kind of communication? It's just about transfering some data from PFC to network and setting some analogsettings from network to the PFC. So my easiest question: Do I ever need the SNMP_Agent or can I use the SET / GET function as standalone, without the agent? (maybe some more questions will follow, if someone will answer to my request) thanks so far
Last updated: 2024-08-21

Post by m83coding on Raspberry Pi Codesys SPI Master ^{CODESYS Forge talk (Post)}
Hello, I am trying to control shift registers 74HC596 and 74HC165 via Raspberry PI with SPI interface. So far I did it with a Microcontroller and now I wanna upgrade my Projekt with Raspberry Pi and Codesys Software to be more flexible. I tried to adapt PiFace Function Block to just send or recive a 8 bit via SPI interface of the my Raspberry Pi. With following code (see attached screenshots) * PLC_PRG * PiFaceDigital * PiFaceDigital.write8 * PiFaceDigital.read8 I have a signal at SCK and MOSI pin of the PI, so far so good. But I really struggle with the unterstanding of the code. Is there some detailed description of each line of code? Or is there somebody in the community who can explain each line of code? Or is there a more simple way to send / recive 8 bit via SPI? Manuel
Last updated: 2024-04-23

Post by wistaro on Hardware compatibility with Linux RealTime PLC ^{CODESYS Forge talk (Post)}
Hello, I am currently using Codesys Control RTE Softmotion V3 to control my servo-drives in CAN, EtherCAT and PROFINET IRT. I am using a PC with Windows 10 with the following boards: - PEAK-CAN PCIe board (for CAN and Softmotion); - Hilscher CifX with firmware 3.X and SysDrv3s driver (for PROFINET IRT); - Realteak standard NIC (for EtherCAT). I would like to switch to Linux (Debian), because this computer is old, slow, and outdated (Windows 11 is far from being compatible with this computer). Before doing this, I would like to be sure of the compatility between my 3 boards and Codesys Control Linux SL. Otherwize, I will stay on Windows 10 and use it in an isolated environnement. Thanks for your advices. Regards,
Last updated: 2026-06-15

Reading from a file, a line of CSV values with CrLf at the end of the line. ^{CODESYS Forge talk (Thread)}
Reading from a file, a line of CSV values with CrLf at the end of the line.
Last updated: 2018-09-18

Setting up the "Visual Studio Code" debugging environment (using .NET debugging) for use with the ScriptEngine API in Python. ^{CODESYS Forge talk (Thread)}
Setting up the "Visual Studio Code" debugging environment (using .NET debugging) for use with the ScriptEngine API in Python.
Last updated: 2023-10-02

Post by davidbo on Is OPC communication possible with server certificate but no client certificate ^{CODESYS Forge talk (Post)}
I was just wondering is the following option possible and what the settings should be. Is OPC communication possible with only and mandatory server certificate but no client certificate?
Last updated: 2023-10-06

Post by nathant on Easiest RevPi PLC to configure HMI visualization with? ^{CODESYS Forge talk (Post)}
I'm worried that the Core SE (which I was originally going to go with) will not be straight foward in terms of setting up the HMI visualization. This is for an offline application, if that matters.
Last updated: 2023-11-28

Post by nathant on Easiest RevPi PLC to configure HMI visualization with? ^{CODESYS Forge talk (Post)}
I'm worried that the Core SE (which I was originally going to go with) will not be straightfoward in terms of setting up the HMI visualization. This is for an offline application, if that matters.
Last updated: 2023-11-28

Post by salvadegianluca on Eoe issues with Windows and Linux ^{CODESYS Forge talk (Post)}
Is there any way to have EoE working with Tap names different from tap0? My PLC manufacturer uses Tap0 for the remote assistance service and it's not avvailable for other uses.
Last updated: 2024-10-07

Post by gabor-n on PNIO Connect Parameter Error ^{CODESYS Forge talk (Post)}
Hello, I have the same issue, but with 2 Raspberry Pi3b+ in connection with Profinet. Has it been solved yet? Thank You all! Gabor
Last updated: 2024-10-08

Post by batuhanarslan on Dynamic Image Show ^{CODESYS Forge talk (Post)}
Hello Everyone, I have 5 images with same position in the screen. I would like to pass around them with giving an GlobalIndexImageId how can I do it. In properties part I don't understand the which one is doing that. Best Regards
Last updated: 2024-10-13

Post by gatto on Profinet Exor connection drop ^{CODESYS Forge talk (Post)}
did you try setup two eth ? on ethO you set ip to communicate with pc, example 192.168.0.1 on eth1 ip to communicate with weidmuler I/O, example 192.168.100.1 note : ip need the same of ip setup under system setting of hmi.
Last updated: 2024-10-16

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
I do not have error anymore using nic with eth0 value. But my network it still 172.17.0.3 like the first picture.
Last updated: 2024-10-23

Post by markushunter on loading delay with the option "check client animations and overlay of native elements" ^{CODESYS Forge talk (Post)}
Hey etiennenneu, I have the same problem with our prototype cell application. Do you have found a workaround for it? Best regards, Markus
Last updated: 2024-11-04

Sort by relevance or date