Post by serwis on Dynamic target position tracking ^{CODESYS Forge talk (Post)}
Hello, I am trying to control a servo drive and dynamically set its position. I control the drive via EtherCAT with a cycle time of 500us. I use the MC_MoveAbsolute block for this. The problem is that when using a PID controller, I generate the positions I want the drive to move to on an ongoing basis, and I would like the position to be set immediately. The MC_MoveAbsolute block must receive a rising edge to execute, and I would like the movement to be performed without waiting for this edge. I have created a function that generates a rising edge every 1 ms, but I am unable to change this time to 500 µs because the TON function does not support times shorter than 1 ms. Below is the code to call the rising edge: IF Exe = TRUE THEN delay1(IN:=TRUE, PT:=T#1MS); IF delay1.Q = TRUE THEN Exe := FALSE; delay1(IN:=FALSE); END_IF END_IF IF Exe = FALSE THEN delay(IN:=TRUE, PT:=T#1MS); IF delay.Q = TRUE THEN Exe := TRUE; delay(IN:=FALSE); END_IF END_IF END_IF Here is the code for calling the MC_MoveAbsolute function: MoveDegree( Axis:= Tilt, Execute:= Exe, Position:= position_target - (base_angle_real * feedforward_turn), Velocity:= vel, Acceleration:= acc, Deceleration:= dec, Jerk:= jerk, Direction:= MC_DIRECTION.shortest, BufferMode:= MC_BUFFER_MODE.Aborting, Done=> , Busy=> , Active=> , CommandAborted=> , Error=> , ErrorID=> ); I realize that there are probably better methods for performing this type of task. How can I implement motion with a dynamically changing setpoint? THANKS
Last updated: 2025-09-05

Post by cer-wa on Not able to connect multiple profinet encoder in codesys Linux ARM64 ^{CODESYS Forge talk (Post)}
Hello, currently im working with a RevPi connect 5 on a codesys project. Up until now I was having a blast because things were going really smooth but for like almost a day im kind of stuck on the integration of multiple profinet sensors into my project. This is kind of a bummer because that should be an easy thing to do. What I tried so far was to create and additional ethernet adapter where I then tried to connect my devices. in the beginning I tried to connect the devices directly which was not working because I could assign the IP-adress only to the ethernet adapter and not to the devices but the device was found in the device repository (this gets important in the second part) So what I tried next was to setup a PN-Controller and connect my devices subsequently to the Controller. Sadly now the devices wont show up in the device repository anymore. To me its not clear why this is happening. And the worst thing is: I went ahead and setup a device completely like I would want to have it in the project and when I then click on scan devices I can even find the device. But it can not be added to project for whatever reason eventhough im 100% certain that the gsdml file is the correct one. Can anyone help me with this. Like I said this seems like an easy thing to do and its taking me way longer than expected already. The only thing that came to my mind why this might not work is because I have codesys license which only allows one profinet instance. Could that be the case? The error message seems then pretty unfit but ok. I will be grateful for every advice. Thanks in advance! Best regards!
Last updated: 2025-09-25

Post by tk096 on High Cycle Times for SoftMotion_PlanningTask when using AxisGroup ^{CODESYS Forge talk (Post)}
Hi, under this circumstances the performance of a Raspberry Pi 4 should be sufficient to run a Softmotion robotics application. A closer look at the project would be required. Maybe you could contact the codesys support? Usually it is recommended to run the planning task cyclically every 2ms with task priority of 0 on a dedicated core. In the task configuration you can have a look at the average and maximum execution time of the planning task. You could use the function block SMC_TuneCPKernel (https://content.helpme-codesys.com/en/libs/SM3_Robotics/Current/SM3_Robotics/POUs/AdministrativeConfiguration/Computation/SMC_TuneCPKernel.html) to define suitable values for the parameters 'fSyncBufferDuration' and 'fPlanningInterval'. However, as previously mentioned, the performance of a Raspberry Pi 4 with realtime patch should be sufficient. The 'fPlanningInterval' parameter specifies the maximum planning step width in seconds. The cycle time of the planning task should not permanently exceed this value. A higher value reduces the computational effort, but can lead to a violation or no full utilization of the set limit values for velocity, acceleration and jerk. From a starting value of 0.016 seconds, the value should be increased gradually until the performance is acceptable. The parameter 'fSyncBufferDuration' specifies the size (in seconds) of the buffer between the planning and fieldbus task. The cycle time of the planning task must not exceed this value at peak times (this will lead to the error SMC_CP_QUEUE_UNDERRUN). A higher value can compensate for peaks in the cycle time of the planning task. At the same time, however, this also increases the latency for executing interrupts and aborting movements.
Last updated: 2024-03-22

Post by leandroct on Error reading files after runtime update from 4.0.0.0 to 4.8.0.0 ^{CODESYS Forge talk (Post)}
Since version 19 they changed how file access is handle. There are two solutions: 1. You change where the file is stored (need to go to: /PlcLogic/) 2. You can, if you don´t want to store at PlcLogic, add the following line in the CODESYSControl.cfg under [SysFile]: ForceIecFilePath=0 The CodesysControl.cfg is at C:\ProgramData\CODESYS\CODESYSControlWinV3x64\xxPROJECT_NUMBERxx\ Here the email they sent me: "with the 3.5.19 Version we changed how files are handled. See following issue: CDS-81506 - CODESYS Control SysFile system file access vulnerability. There are two solutions: 1. You change where the file is stored (need to go to: /PlcLogic/) 2. You can, if you don´t want to store at PlcLogic, add the following line in the CODESYSControl.cfg under [SysFile]: ForceIecFilePath=0 Here is the official release-note: [[COMPATIBILITY_INFORMATION]] With the activation of ForceIecFilePath the file access from IEC is now restricted to the configured paths only (file sandbox)! [SysFile] ForceIecFilePath=1 (new default) The standard path is the current directory, the PlcLogic subfolder or a configured path. Every file access outside of this path is configured via PlaceholderFilePath, for example access to temporary files or removable media: [SysFile] PlaceholderFilePath.1=/tmp, $TMP$ PlaceholderFilePath.2=/media/usb, $USB$ PlaceholderFilePath.2.Volatile=1 For more information see our tutorial FilePath & Placeholders. To restore the old behavior ForceIecFilePath may be configured as follows: [SysFile] ForceIecFilePath=0 BUT WE HIGHLY RECOMMEND TO LEAVE THIS SETTING AT ITS NEW DEFAULT VALUE! "
Last updated: 2024-05-07

Post by jzhvymetal77 on IecVarAccessLibrary.IBaseTreeNode methon ^{CODESYS Forge talk (Post)}
I had this code working in a previous version of CoDeSys to read variables from a GVL that were added to the Symbol configuration. The problem now is that when I get the _IBaseTreeNode_Parent, it returns a valid interface, but none of the methods or properties work. If you monitor the _IBaseTreeNode in the watch window, it does show the correct child count. However, it fails at step 30, where the child count incorrectly returns zero. In the image, you can see that the watch window displays the correct value that the property should return. Attached is the full project code. FUNCTION_BLOCK Symbols_TO_STR VAR_INPUT i_sPath : STRING(255); i_diIndexChild : DINT; i_diIndexComponent : DINT; END_VAR VAR_OUTPUT q_diChildCount : DINT; q_diComponentCount : DINT; q_sName : STRING(255); q_sValue : STRING(255); q_sType : STRING(80); q_sErrorResult : STRING(80); END_VAR VAR uiStepCopy : UINT; uiStep : UINT; uiStepProcessCopy : UINT; uiStepProcess : UINT; _IBase : IecVarAccessLibrary.IBase; _pIIecVarAccess5 : POINTER TO IecVarAccessLibrary.IIecVarAccess5; _IIecVarAccess5 : IecVarAccessLibrary.IIecVarAccess5; _RTS_IEC_RESULT : IecVarAccessLibrary.RTS_IEC_RESULT; _udiResult : UDINT; _VariableInformationStruct : IecVarAccessLibrary.VariableInformationStruct; _IBaseTreeNode_Parent : IecVarAccessLibrary.IBaseTreeNode; _IBaseTreeNode_Child : IecVarAccessLibrary.IBaseTreeNode; _ITypeDesc_Child : IecVarAccessLibrary.ITypeDesc; _TypeDescAsUnion_Child : IecVarAccessLibrary.TypeDescAsUnion; _arIBaseTreeNode_Child : ARRAY[0..20] OF IecVarAccessLibrary.IBaseTreeNode; _TypeClass_Child : IecVarAccessLibrary.IBaseLibrary.TypeClass; _psSymbolName_Child : POINTER TO STRING; _sSymbolName_Child : STRING(255); _IBaseTreeNode_Component : REFERENCE TO IecVarAccessLibrary.IBaseTreeNode; _TypeClass_Component : IecVarAccessLibrary.IBaseLibrary.TypeClass; _ByteAddress_Component : __XWORD; _ByteOffset_Component : __XWORD; _sArrayIndexName_Component : STRING(20); _diArrayIndexCalc_Component : DINT; _diArrayIndexValue_Component: DINT; _psSymbolName_Component : POINTER TO STRING; _sSymbolName_Component : STRING(255); END_VAR uiStepCopy:=uiStep; uiStepProcessCopy:=uiStepProcess; CASE uiStep OF 10: // GET IBASE FROM CURRENT APP _IBase:= IecVarAccessLibrary.IecVarAccGetFirstInterface2(0); IF _IBase<>0 THEN uiStep:=20; ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': IecVarAccGetFirstInterface2'); uiStep:=9000; END_IF 20: //QueryInterface IIecVarAccess5 from IBASE _pIIecVarAccess5 := _IBase.QueryInterface(IecVarAccessLibrary.ITFID_IIecVarAccess5, ADR(_RTS_IEC_RESULT)); IF _pIIecVarAccess5<>0 AND _RTS_IEC_RESULT=0 THEN _IIecVarAccess5 := _pIIecVarAccess5^; uiStep:=30; ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': QueryInterface_IIecVarAccess5'); uiStep:=9000; END_IF 30: // Get IBaseTreeNode_Parent _IBaseTreeNode_Parent := _IIecVarAccess5.VarAccGetNode3(ADR(i_sPath), ADR(_VariableInformationStruct), ADR(_RTS_IEC_RESULT)); IF _IBaseTreeNode_Parent<>0 AND _RTS_IEC_RESULT=0 THEN q_diChildCount:=_IBaseTreeNode_Parent.ChildCount; uiStep:=40; ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': IBaseTreeNode_Parent'); uiStep:=9000; END_IF 40: // Get IBaseTreeNod_Child IF(q_diChildCount-1>=i_diIndexChild AND i_diIndexChild >=0) THEN _IBaseTreeNode_Child := _IBaseTreeNode_Parent.GetChild(i_diIndexChild); IF _IBaseTreeNode_Child<>0 THEN uiStep:=50; ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': IBaseTreeNode_Parent'); uiStep:=9000; END_IF ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': i_diIndexChild OutBounds'); uiStep:=9000; END_IF
Last updated: 2025-08-20

Post by solidlogicguy on Little endian to Float from Modbus RTU ^{CODESYS Forge talk (Post)}
Hello, I got a device from which I require to read values from I am using a WAGO PLC 750-8212 and I am communicating through Modbus Master FUNCTION BLOCK from library WagoAppPLCModbus in Codesys 3.5 to this device. I already receive data from the device that is a CVM to monitor voltage from a fuel cell. The technical support of the company that makes these devices says that the data is sent in little endian form. And I want to convert it to a float value. The tech support sent me the next instructions of how to do it but I am new using codesys, so any advice or help I will really appreciate so much. Message from tech support: The process is complicated, better to do it with already implemented library in the language/program you use. Basically the process should be next: To convert the two Modbus registers containing parts of a 32-bit float in little-endian byte order to a floating-point number using mathematical operations, you first need to combine the two 16-bit integers (assuming reg1 is the lower word and reg2 is the higher word) and then interpret the result according to the IEEE 754 standard. Given: - Register 192 (reg1) = 4096 - Register 193 (reg2) = 14884 Step 1: Combine the two registers. Since we are dealing with little-endian byte order, reg2 is the high word, and reg1 is the low word: combined = reg2 * 2^16 + reg1 combined = 14884 * 65536 + 4096 combined = 975175680 + 4096 combined = 975179776 Step 2: Convert the combined value to binary: combined_binary = '1110101101011100000000000000000' Step 3: Split the binary into IEEE 754 components: Sign bit (1 bit): 0 Exponent (8 bits): 11101011 Mantissa (23 bits): 01011100000000000000000 Step 4: Convert the binary exponent to decimal and subtract the bias (127 for 32-bit floats): exponent = int('11101011', 2) - 127 exponent = 235 - 127 exponent = 108 Step 5: Calculate the mantissa as a fraction: The mantissa in IEEE 754 format is the fractional part after the leading 1 (which is implicit). Therefore, we need to convert the binary mantissa to decimal and add the implicit leading 1: mantissa_fractional = 1 + int('01011100000000000000000', 2) / 2^23 mantissa_fractional = 1 + 18688 / 8388608 mantissa_fractional = 1 + 0.002227783203125 mantissa_fractional ≈ 1.002227783203125 Step 6: Combine the sign, exponent, and mantissa to get the float value: float_value = (-1)^0 * mantissa_fractional * 2^exponent float_value = 1 * 1.002227783203125 * 2^108 Because the exponent is quite large, the resulting float value is a very large number.
Last updated: 2023-12-15

Post by jackbrady on Function Blocks and arrays of function blocks ^{CODESYS Forge talk (Post)}
Hello, I am new to Codesys and PLC programming in general (please go easy ha!) I'm not looking for code to be written for me just some help and pointing in the right direction. I am writing some code to send commands to a relay based on input values (to put it simply). Quite basic stuff. I have wrote a function block that takes a global variable (Open_command:BOOL) and outputs to another global variable (Opened : BOOL). The function block is simulating a device so I'll eventually get the globals from that. I now need to create multiple versions of this function block/ device (lets say 100) but I need each iteration of that function block to reference it's own relevant global variable. I think that the best way of doing this would be to use arrays, although I could be wrong. I am aware that for up to 100 instances I could very well manually assign everything but that seems rather time consuming and I want a fancier way of doing it. Here is a very basic example of what I am looking to do, please note I have not written this in proper code it's just to show what I mean. Global Variables V[0-100] int Open_command [0-100] Bool Opened [0-100] Bool Function Block var input x : BOOL Var output y : BOOL if x then y = TRUE ELSE y = FALSE The input to my function block will be Open_command, output will be Opened Example code. If V[x] > 10 then Open_command [x] = TRUE ELSE Open_command [x] = FALSE (So when V1 goes above 10 I need Open_command1 = TRUE therefore initiating FB1 output. V2 > 10, open_command2 = True > FB2 output V3 > 10, open_command3 = True > FB3 output ... ... ) What I can't seem to figure out is how to tie all this together, I have read through the codesys documentation and if anything it has confused me more! ha. Apologies for the poorly written post but hopefully you understand what I am trying to get at. Thanks, Jack
Last updated: 2024-02-14

Post by mariapaola on Port instantiation of serial interface in WAGO PLC using Modb_L05.lib in CoDeSys v2.3 ^{CODESYS Forge talk (Post)}
Hi, Would really appreciate your insights in this issue I have. I am currently using a WAGO 750-881 with multiple IO devices. For one of them I already occupied the MODBUS Master configuration tool so I cannot overwrite it for my other devices. I have a total of two serial interfaces WAGO 750-652. The first one is instantiated in COM2 and doesn't need any protocol since the information comes in an specific formatting that need little code to differentiate between needed info. This one is working just fine. The second one is where I have an issue. I have tried to instantiate the port using MODBUS library modb_L05.lib to properly receive the data from an ARDUINO and I am absolutely unable to open the port: Signal DEVICE2.fbModbus.MODBUS_EXT_MASTER.Interface.Com_Port_Ist_Offen is never TRUE, among with all other signals from that interface, while signal DEVICE1.COM2.Com_Port_Ist_Offen is TRUE, and the other signals also read as TRUE or FALSE. I have tried instantiating the second one as the first one, changing COM3 to COM4, I've tried a lot of things but it wont ever open the channel. I don't know if you have any recommendations for me. For both physical modules, both witness LEDs A and E are on. First one is instantiated like this: PROGRAM DEVICE1 VAR wBaudRate : WORD := BAUD_9600; bDataBits : BYTE := 8; bParity : BYTE := 0; bFlowControl : BYTE := 3; (RS422 FullDuplex with continous send) i : INT; COM2 : SERIAL_INTERFACE; xOpenPort2 : BOOL := TRUE; ( Flag to open the Port ) xInitPort2 : BOOL; ( Flag to initiallize the Port ) ReceiveBuffer2 : typRing_Buffer; END_VAR COM2( bCOM_PORT_NR := 2, cbBAUDRATE := wBaudRate, cbsBYTESIZE := bDataBits, cpPARITY := bParity, csSTOPBITS := STOPBITS_1, cfFLOW_CONTROL := bFlowControl, utRECEIVE_BUFFER := ReceiveBuffer2, ptSEND_BUFFER := ADR(SendString2), xINIT := xInitPort2, xOPEN_COM_PORT := xOpenPort2, iBYTES_TO_SEND := LEN(SendString2)+1, xSTART_SEND := xSendActive2 ); Second one like this: PROGRAM DEVICE2 VAR COM4 : SERIAL_INTERFACE; xInitPort4 : BOOL := TRUE; xOpenPort4 : BOOL := TRUE; ReceiveBuffer4 : typRing_Buffer; fbModbus : MODBUS_EXTENDED_MASTER_RTU; fbError : enumMB_ERROR; stQuery : typModbusExtendedQuery; stResponse : typModbusResponse; au16Data : ARRAY[0..14] OF WORD; i : INT; tPoll : TON; END_VAR COM4( bCOM_PORT_NR := 4, cbBAUDRATE := BAUD_9600, cbsBYTESIZE := 8, cpPARITY := 0, csSTOPBITS := STOPBITS_1, cfFLOW_CONTROL := 2, ( RS-485 half-duplex ) utRECEIVE_BUFFER := ReceiveBuffer4, xINIT := xInitPort4, xOPEN_COM_PORT := xOpenPort4, xSTART_SEND := xSendActive4, ); stQuery.SlaveAddress := 1; stQuery.FunctionCode := 3; stQuery.Read_StartAddress := 0; stQuery.Read_Quantity := 15; (Poll code) fbModbus( ENABLE := TRUE, bCOM_PORT := 4, ( COM4=> 750-652 port ) cbCOM_BAUDRATE := BAUD_9600, cpCOM_PARITY := 0, csCOM_STOPBITS := 1, cbsCOM_BYTESIZE := 8, cfCOM_FLOW_CONTROL := 2, TimeOut := T#500ms, StartFunction := xStart, ExtQuery := stQuery, Response := stResponse, MB_Error => fbError ); FOR i := 0 TO 14 DO au16Data[i] := stResponse.Data[i]; END_FOR;
Last updated: 2025-11-28

Post by bschraud on runtime received SIGABRT ^{CODESYS Forge talk (Post)}
Ich konnte den Fehler leider nicht wirklich finden. Hier mein bisheriger Fortschritt: Um nähere Informationen zu bekommen, habe ich einen strace erstellt: PID ermitteln: $ ps aux | grep codesyscontrol | grep -v grep --> 560 sudo strace -tt -f -p 560 -o /tmp/codesys_strace.log (Die Logdatei wird schnell einige hundert MB groß.) Mit grep -B 100 'si_signo=SIGABRT' /tmp/codesys_strace.log konnte ich die relevanten Einträge finden: (Die PID hat sich inzwischen wegen einem Reboot geändert) 1023 15:33:49.497136 writev(2, [{iov_base="Unexpected error 9 on netlink de"..., iov_len=45}], 1 <unfinished ...=""> .. 1023 15:33:49.498352 tgkill(545, 1023, SIGABRT <unfinished ...=""> 1023 15:33:49.498440 <... tgkill resumed> ) = 0 .. 1023 15:33:49.498730 --- SIGABRT {si_signo=SIGABRT, si_code=SI_TKILL, si_pid=545, si_uid=0}</unfinished></unfinished> Der Codesys Log zeigt zu diesem Zeitpunkt: Exception: HANDLED EXCPT <excpt>NonContinuable</excpt> in CH_COMM_CYCLE Mit sudo lsof -p 545 habe ich die Anzahl der geöffneten Dateien überprüft ohne Auffälligkeiten Mit sudo netstat -tunaep | grep codesys habe ich die offenen Netzwerkverbindungen der codesys Prozesse überprüft Hier sieht es so aus, dass codesyscontrol und codesysedge über die externen Netzwerkschnittstelle anstatt über den localhost kommunizieren: udp 0 0 172.19.11.127:1740 0.0.0.0: 0 17882 549/codesyscontrol. udp 0 0 172.19.11.255:1740 0.0.0.0: 0 17883 549/codesyscontrol. udp 0 0 172.19.11.255:1743 0.0.0.0: 0 16993 529/codesysedge.bin udp 0 0 172.19.11.127:1743 0.0.0.0: 0 16992 529/codesysedge.bin Leider kann ich keine Konfiguration mit einer anderen Schnittstelle einstellen.. Als nächstes habe ich die udp Kommunikation der beiden Prozesse aufgezeichnet: SPID des BlkDrvUdp Threads ermitteln: $ ps aux | grep codesyscontrol | grep -v grep --> 548 $ ps -T -p 548 | grep BlkDrvUdp --> 1200 Damit kann man den strace starten: sudo strace -p 1020 -f -tt -o /tmp/udp_control_trace.log -e trace=socket,connect,bind,sendto,recvfrom,close $ ps aux | grep codesysedge | grep -v grep --> 528 $ ps -T -p 528 | grep BlkDrvUdp --> 789 sudo strace -p 789 -f -tt -o /tmp/udp_edge_trace.log -e trace=socket,connect,bind,sendto,recvfrom,close Beim Aufzeichnen des Traces kamen wiederholte Fehlereinträge im codesyscontrol.log (diesmal ohne SIGABRT) nach folgendem Muster: tail -f /var/opt/codesys/codesyscontrol.log (mit UTC Zeit) 2025-04-17T11:23:43.147Z, 0x00000071, 1, 0, 0, Host : PAC4 2025-04-17T11:23:43.147Z, 0x00000071, 1, 0, 0, HTTP port : 8080 2025-04-17T11:23:43.147Z, 0x00000071, 1, 0, 0, HTTPS port : 443 2025-04-17T11:23:43.147Z, 0x00000071, 1, 0, 0, Connection type : HTTP 2025-04-17T11:23:43.147Z, 0x00000071, 1, 0, 0, ********** 2025-04-17T11:23:46.318Z, 0x00000061, 1, 0, 0, Create asymmetric key done! 2025-04-17T11:23:53.464Z, 0x00000071, 1, 404, 0, File $PlcLogic$/$visu$/favicon.ico not found on this server 2025-04-17T11:23:55.208Z, 0x0000100c, 1, 0, 0, Visu_PRG: Creating Client for Extern-ID: 2025487823 2025-04-17T11:23:55.216Z, 0x0000100c, 1, 0, 0, Visu_PRG: Creating Client successful for Extern-ID: 2025487823 Returned IEC-ID: 0 2025-04-17T11:40:43.471Z, 0x00000114, 4, 1, 0, ** ERROR: SysTaskCreate [CheckLicense0]: pthread_setname_np: Bad file descriptor Hier der dazu passende trace auszug von grep -B 100 '13:40:43' /tmp/udp_edge_trace.log: 798 13:40:42.592535 socket(AF_NETLINK, SOCK_RAW|SOCK_CLOEXEC, NETLINK_ROUTE) = 9 798 13:40:42.592794 bind(9, {sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, 12) = 0 798 13:40:42.593049 sendto(9, {{len=20, type=0x12 / NLMSG_??? /, flags=NLM_F_REQUEST|0x300, seq=1744890042, pid=0}, "\x00\x00\x00\x00"}, 20, 0, {sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, 12) = 20 798 13:40:42.602995 sendto(9, {{len=20, type=0x16 / NLMSG_??? /, flags=NLM_F_REQUEST|0x300, seq=1744890043, pid=0}, "\x00\x00\x00\x00"}, 20, 0, {sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, 12) = 20 798 13:40:42.614794 close(9) = 0 798 13:40:42.615065 socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0) = 9 798 13:40:42.615331 close(9) = 0 798 13:40:42.616159 close(9) = 0 798 13:40:42.616318 socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0) = 9 798 13:40:42.616555 close(9) = 0 798 13:40:42.617209 close(9) = 0 798 13:40:42.617355 socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0) = 9 798 13:40:42.617590 close(9) = 0 798 13:40:42.618497 close(9) = 0 798 13:40:42.618712 socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0) = 9 798 13:40:42.618995 close(9) = 0 798 13:40:42.619568 close(9) = 0 798 13:40:42.620247 close(9) = 0 798 13:40:42.620441 socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0) = 9 798 13:40:42.620690 close(9) = 0 798 13:40:42.621181 close(9) = 0 798 13:40:42.621823 close(9) = 0 798 13:40:43.520036 close(9) = 0 798 13:40:43.520406 close(9) = 0 und grep -B 100 '13:40:43' /tmp/udp_control_trace.log 1035 13:40:43.389785 socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0) = 20 1035 13:40:43.390043 close(20) = 0 1035 13:40:43.390681 close(20) = 0 1035 13:40:43.393690 close(20) = 0 22586 13:40:43.450945 close(0) = 0 22586 13:40:43.451230 close(0) = -1 EBADF (Ungültiger Dateideskriptor) 22586 13:40:43.451689 close(20) = 0 22586 13:40:43.452104 close(1) = 0 22586 13:40:43.452481 close(21) = 0 22586 13:40:43.452679 close(2) = 0 22586 13:40:43.452860 close(2) = -1 EBADF (Ungültiger Dateideskriptor) 1009 13:40:43.454112 close(21) = 0 22586 13:40:43.454522 close(8) = 0 22586 13:40:43.455428 close(8) = 0 22586 13:40:43.455976 close(8) = 0 22586 13:40:43.456852 close(8) = 0 22587 13:40:43.463115 close(8) = 0 22587 13:40:43.464074 close(8) = 0 22587 13:40:43.464682 close(8) = 0 22587 13:40:43.465463 close(8) = 0 22587 13:40:43.468229 close(8) = 0 22587 13:40:43.468737 close(1 <unfinished ...=""> 1009 13:40:43.468805 close(20 <unfinished ...=""> 22587 13:40:43.468849 <... close resumed> ) = 0 1009 13:40:43.468896 <... close resumed> ) = 0 22587 13:40:43.468942 close(2) = 0 22587 13:40:43.469504 +++ exited with 0 +++ 22586 13:40:43.469670 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=22587, si_uid=0, si_status=0, si_utime=0, si_stime=1} --- 22586 13:40:43.470175 +++ exited with 0 +++ 1009 13:40:43.470265 close(20) = 0 546 13:40:43.470577 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=22586, si_uid=0, si_status=0, si_utime=0, si_stime=2} --- 1035 13:40:43.470913 close(20) = -1 EBADF (Ungültiger Dateideskriptor) 22588 13:40:43.480352 --- SIGRT_7 {si_signo=SIGRT_7, si_code=SI_TKILL, si_pid=546, si_uid=0} --- 22588 13:40:43.481675 --- SIGRT_6 {si_signo=SIGRT_6, si_code=SI_TKILL, si_pid=546, si_uid=0} --- 22588 13:40:43.482410 +++ exited with 0 +++</unfinished></unfinished> Die Zeile 2025-04-17T11:40:43.471Z, 0x00000114, 4, 1, 0, **** ERROR: SysTaskCreate [CheckLicense0]: pthread_setname_np: Bad file descriptor zeigt, dass der EBADF-Fehler beim Versuch auftritt, einen neuen Thread namens "CheckLicense0" zu erstellen. Die Funktion pthread_setname_np() erhält einen EBADF-Fehler. Ich weiß leider nicht, ob das eine heiße Spur ist. Parallel dazu habe ich die Aufrufe von Systemfunktionen über SysProcess_Implementation.SysProcessExecuteCommand2 auskommentiert ohne den Fehler damit abzustellen. An diesem Punkt habe ich wegen Termindruck den alten Stand der Runtime (4.11.0.0) mit der Codesys Version 3.5 SP20 wiederhergestellt und die geänderten Programme und Visualisierungen manuell getauscht mit dem Ergebnis, dass der Fehler in den letzten 2 Stunden nicht mehr aufgetreten ist. Wenn jemand das Problem kennt, wäre ich für einen Austausch dankbar. Frohe Ostern!
Last updated: 2025-04-17

Post by mgabryel on Problems with CAN 2.0 comunication on Wago PLC (Codesys 3.5) ^{CODESYS Forge talk (Post)}
Hello, I am trying to program CAN Bus comunication on WAGO PLC (more precisely on WAGO Touch Monitor model TP600). I am using for this purpose library "WagoAppCanLayer2" from Wago company. My IDE for programming this device is CODESYS V3.5 SP19 Patch 2 + (64-bit). My program is written in Structured text using function blocks from previously mentioned library. Here is code of this program: 1) Variables declarations: PROGRAM PLC_PRG VAR oOpenInterface : WagoAppCanLayer2.FbCanL2Open :=( udiBaudrate := 125000 ); xInterfaceIsOpen : BOOL; sInterfaceInfo : STRING; oReceive : WagoAppCanLayer2.FbCanRx29BitFrame :=( xBufferMode := FALSE, wCanId := 16#181 ); xRecv : BOOL; sReceiveInfo : STRING; oSend : WagoAppCanLayer2.FbCanTx29BitFrame :=( dwCanId := 16#100, //was 16#201 xRtrFrame := FALSE ); xSend : BOOL; sSendInfo : STRING; oCanDiag : WagoAppCanLayer2.FbCanErrorInfo; xRst : BOOL; aSendData : ARRAY [1..8] OF BYTE; bSendLen : BYTE; TON_0 : TON; TON_1 : TON; END_VAR 2) Program body: oOpenInterface( xEnable := NOT xInterfaceIsOpen, I_Port := IoConfig_Globals.WAGO_CAN_LAYER2_DEVICE ); sInterfaceInfo := oOpenInterface.oStatus.GetDescription(); xInterfaceIsOpen S= oOpenInterface.xValid AND NOT oOpenInterface.xError; oReceive( xEnable := xInterfaceIsOpen, I_Port := IoConfig_Globals.WAGO_CAN_LAYER2_DEVICE, xRxTrigger := xRecv ); sReceiveInfo := oReceive.oStatus.GetDescription(); IF NOT xRecv THEN IF oReceive.bRxNBytes > 0 THEN oReceive.aRxBuffer[1]; oReceive.aRxBuffer[2]; oReceive.aRxBuffer[3]; oReceive.aRxBuffer[4]; oReceive.aRxBuffer[5]; oReceive.aRxBuffer[6]; oReceive.aRxBuffer[7]; oReceive.aRxBuffer[8]; END_IF xRecv := TRUE; END_IF aSendData[1] := 224; aSendData[2] := 13; aSendData[3] := 14; aSendData[4] := 15; aSendData[5] := 222; aSendData[6] := 13; aSendData[7] := 14; aSendData[8] := 15; bSendLen := 8; TON_0(IN:= NOT TON_1.Q, PT:= T#2S , Q=>xSend, ET=> ); TON_1(IN:= TON_0.Q, PT:= T#2S , Q=>, ET=> ); oSend( xEnable := xInterfaceIsOpen, I_Port := IoConfig_Globals.WAGO_CAN_LAYER2_DEVICE, aTxBuffer := aSendData, bTxNBytes := bSendLen, xTxTrigger := xSend ); sSendInfo := oSend.oStatus.GetDescription(); oCanDiag( xEnable := TRUE, I_Port := IoConfig_Globals.WAGO_CAN_LAYER2_DEVICE, xTriggerResetCounter := xRst, xValid=> , xError=> , oStatus=> , wBusState=> , wBusDiag=> , uiRxOverflowsL2=> , uiTxOverflowsL2=> , uiRxOverflows=> , uiMsgTimeouts=> , uiBusOffs=> , uiBusWarnings=> ); Program first opens comunication on CAN 2 device and then periodically try send one CAN data frame. After starting program CAN 2 interface is properly open. The xSend variable is toggling with period 2s. When program sends data an "Tx overflow" error appears. When I am watching CAN_H line on DSub 9 socket i am not able to see proper CAN frames - see screenshot attached to this message. Could somebody help me determine what is wrong with this program. Best regards
Last updated: 2024-08-02

Post by gustavocsw on MQTT memory leak problem ^{CODESYS Forge talk (Post)}
Hello everyone, I'm using the IoT Library to implement the MQTT communication with my local broker server in order to publish and subscribe at specifics topics to share and consume information about my application. But, it seems that are occurring some memory leak problem in a "high" frequency (more than 10 Hz) subscribe process. I follow the same method as in IoT Lib exemples, and at first looks perfect but my PLC was rebooting frequently and when I check its memory usage that was increasing as fast as the subscribe massage was sent. I'm using a WEG PLC410 and a WEG PLC500, and this error occurred in both of them (including in CODESYS Control Win x64). The application sends to the system a message JSON with the float payload Ex. {"data" : 0.8500}, but this happens with a INT, or BOL as well. I use the follow code in my application to find the value: //FindFirstValueByKey VARs PROGRAM JSON_VELO VAR //------Setting the JSON Subscriber to Set the Relay Value jsonDataVelo : JSON.JSONData; jsonByteArrayReaderVelo : JSON.JSONByteArrayReader; xST1okVelo : BOOL; FindFirstValueByKeyVelo : JSON.FindFirstValueByKey; jsonElementVelo : JSON.JSONElement; xDoneReaderVelo : BOOL; xDoneFindVelo : BOOL; //STRING and WSTRING for Subscribe the massage sPayloadJsonVelo : STRING := 'opa'; psPayloadJsonVelo : POINTER TO BYTE := ADR(sPayloadJsonVelo); //wsPayloadJsonRelaySet : WSTRING := "opa"; wsPayloadJsonVelo : WSTRING := STRING_TO_WSTRING('opa'); pwsPayloadJsonVelo : POINTER TO WORD := ADR(wsPayloadJsonVelo); lrVelo : LREAL; xKeepAliveVelo : BOOL; xSetVelo : BOOL; RSSet : RS; LIMPAR : STRING; //Find the msg end sFindVelo : STRING := '}'; psFindVelo : POINTER TO STRING := ADR(sFindVelo); iLenVelo : INT; iSizeVelo : INT := 12; udiContMsg : UDINT; END_VAR // FindFirstValueByKey CODE // Relay Set configuration xSetVelo := MQTT_SUBSCRIBER.RSVelo.Q1; IF xSetVelo THEN xKeepAliveVelo := TRUE; END_IF IF xKeepAliveVelo THEN udiContMsg := udiContMsg + 1; iLenVelo := TO_INT(StrLenA(psPayloadJsonVelo)); iSizeVelo := iLenVelo - TO_INT(MQTT_SUBSCRIBER.udiPayloadSizeVelo); StrDeleteA(psPayloadJsonVelo,iSizeVelo,iLenVelo); wsPayloadJsonVelo := STRING_TO_WSTRING(sPayloadJsonVelo); pwsPayloadJsonVelo := ADR(wsPayloadJsonVelo); //MQTT.ConvertUTF8toUTF16(sourceStart:= ADR(sPayloadJsonVelo), targetStart:= ADR(wsPayloadJsonVelo), dwTargetBufferSize:= TAM, bStrictConversion:= 1); //Reset jsonByteArrayReader jsonByteArrayReaderVelo ( xExecute := TRUE, pwData := pwsPayloadJsonVelo, jsonData := jsonDataVelo, xDone => xDoneReaderVelo ); FindFirstValueByKeyVelo( xExecute := xDoneReaderVelo, wsKey := "data", diStartIndex:= 0, jsonData := jsonDataVelo, jsonElement => jsonElementVelo, xDone => xDoneFindVelo ); IF xDoneFindVelo THEN lrVelo := jsonElementVelo.value.lrValue; //Reset jsonByteArrayReader jsonByteArrayReaderVelo ( xExecute := FALSE, pwData := pwsPayloadJsonVelo, jsonData := jsonDataVelo, xDone => xDoneReaderVelo ); FindFirstValueByKeyVelo( xExecute := FALSE, wsKey := "data", diStartIndex:= 1, jsonData := jsonDataVelo, jsonElement => jsonElementVelo, xDone => xDoneFindVelo ); xKeepAliveVelo := FALSE; GVL.xSetVeloRead := TRUE; END_IF END_IF And this to subscribe at the topic: //SUBSCRIBE VAR: //----------------- Subscribe Velocity ----------------------- MQTTSubscribeVelo : MQTT.MQTTSubscribe;//Variable MQTTSubscriber block -X - function-X wsTopicSubscribeVelo : WSTRING(1024) := "CORE/odometry/GET/data/simp"; // Topic to publish a message sSubscribeMassageVelo : STRING; udiPayloadSizeVelo : UDINT; xSDoneVelo : BOOL; xSErrorVelo : BOOL; xReceiveVelo : BOOL; eSTypeVelo : MQTT.MQTT_ERROR; eSMQTTErrorVelo : MQTT.MQTT_ERROR; RSVelo : RS; udiCont : UDINT; //SUBSCRIBE CODE: MQTTSubscribeVelo( xEnable:= MQTT_CLIENT.xConnection_Broker AND NOT xSErrorVelo AND NOT JSON_VELO.xKeepAliveVelo, pbPayload:= JSON_VELO.psPayloadJsonVelo, udiMaxPayloadSize:= SIZEOF(JSON_VELO.sPayloadJsonVelo), udiPayloadSize => udiPayloadSizeVelo, mqttClient:= MQTT_CLIENT.ClientMQTT, wsTopicFilter:=wsTopicSubscribeVelo, xDone => xSDoneVelo, xError=> xSErrorVelo, xReceived => xReceiveVelo, eMQTTError=> eSMQTTErrorVelo ); RSVelo(SET := xReceiveVelo, RESET1 := JSON_VELO.xKeepAliveVelo);
Last updated: 2024-09-09

Post by george32 on Readable IO names ^{CODESYS Forge talk (Post)}
Hello Folks, I have a quite basic understanding of how PLC programming works. However I keep getting stuck on 1 problem I could not get my head around. The problem is as follow: I have a PLC with 60 IO (20 inputs, 40 outputs). Each IO is defined as a function block. Furthermore I have an external IO card connected trough a CanBus connection. This IO card has 4 analog input channels (USINT), 4 digital inputs (Bool) and 4, digital outputs (Bool) Because I have 2 different components which both has data have I made 4 arrays to store the data off every component in one variable. PLC_Input: Array [1..20] of BOOL; PLC_Output: Array [1..40] of BOOL IOCard_Input: Array [1..8] of BOOL IOCard_Output: Array [1..4] of BOOL Because the control and reading of the different in and outputs is done by a TCP connection I want to use some kind of enumeration or struct to give each index a name so that my main would be a little bit more readable instead of all the magic numbers. Also this would make my program more dynamic for the furter in case I need to changes some in the IO nummers. For example: pump is placed on the fysical terminal strip number place 54, which is the 3th output of the IO card in the program: if I am sending a message with value 54 I would like to control IOCard_Output[3]. If there is a solution or methode to get this done, I can eventually do the following in my main program: IOCard_Output[Pump]. I have tried the following: IOCard_Output[Pump - 51] with an enumration but this keeps raising an error I hope some of you could help me further with this problem. In gross lines: I want to couple all the different IO to a more readable name and this readable name should control the right Array index Thanks in advance, George
Last updated: 2024-09-26

Post by gmau on Station 'xyz': AR aborted by device (alarm.ind): AR consumer DHT expired ^{CODESYS Forge talk (Post)}
Hello, I am writing to You with the problem of Profinet communication in my Codesys V2.5 SP21 project working on Codesys Control RTE V3 x64 device. I have implemented multiple Profinet devices in the network, the Profinet itself is configured properly, based on the hardware and software parameters of the industrial PC (Windows 10 IoT). My Profinet network contains such Profinet devices as a robot, IO-Link master with some devices on it, IO modules, safety, vision sensor (the configuration is attached to this topic). Once every few hours, sometimes more often, sometimes not even once a day, the error show up at one, two or a few random modules at the same time, every one is the same: "Station 'xyz': AR aborted by device (alarm.ind): AR consumer DHT expired". The communication is then lost with that module, but it is up instantly. It is not such a problem when it comes to regular IOs, but with safety or rotation table, it causes errors and machine stops. I have tried multiple solution based on any forum suggestions, manuals, etc., but it is still happening. Mabye when I turned on the Watchdog for this communication, it is happening less times, but still, I could not turning up the Watchdog parameters at the expense of cycle time of the process. The same is with Send Clock, Reduction and DHT. I have one of the ethernet port on the PC configured with CmpEt1000Drv driver. The card itself is Intel Ethernet Connection I219-LM. These devices are connected to one EKI-2728-NI-A Profinet switch (it was changed from the standard non Profinet one, but still nothing has changed). As I said ealier, I am attaching all the configurations for each device and the communication itself - if any of You had the same problems or have any ideas what could be the cause, I would be much gratefull for any help. For now I am out of ideas, if You have any additional question, please ask. Sincerely, PF
Last updated: 2025-09-04

Post by kurtk on SysProcess Execute Command unable to run commands with special characters ^{CODESYS Forge talk (Post)}
Thank you for this additional information. Could you please provide the references to the official documentation where you found this information ? I got as far as: Then insert this: [SysProcess] BasePriority=Realtime Command=AllowAll devoid of references of where the CodesysContol.cfg file was located or of the need to run codesys as root I incrementally located bits of information with perplexity searches but remained mired at error 25 ERR_NO_ACCESS I am curious whether root access is MANDATORY to run SysProcessExecuteCommand (- and/or any other SysProcess functions) or if a more access-constrained User=quasiroot could suffice without the security concerns ? Apparently codesys runs fine without User=root for almost everything... That raises the question: What IS the default codesys user ? I notice in the prototypes: VAR sCommand : STRING := '/usr/bin/whoami'; sOutput : STRING(255); refCommand : REFERENCE TO STRING; refOutput : REFERENCE TO STRING; resultCmd : UDINT; END_VAR whenever I attempt to build this Codesys v3.5 SP2 whines that "cannot convert type REFERENCE TO STRING to STRING" don't remember the exact message... Apparently this happens whenever a fixed-length string is involved. if I get rid of (255) and just set the string := ' '; that is sufficient to make the compiler happy. Is this a recently enforced constraint ? Why does this compile for you and not for me ? There are references to functions / utilities which are used/needed to massage the string references - but I see no specific details... I also notice you specify: Make sure the lib SysProcessImplementation, SysTypes, and CmpErrors is on the project. I don't comprehend why all of the dependent libraries are not automatically referenced, added ? I don't recall seeing anywhere but here that SysProcessImplementation must be included... It just seems odd that the default is to exclude essential libraries, or require alchemical conjuring to assemble all the ingredients for gnat soup ;-) Thanks a lot... I'm still a codesys newby getting my wheels on - or sometimes just partially on
Last updated: 2025-09-12

Post by spiessli on Raspberry Pi 4 with Legacy Drivers and Codesys 3.5.19 Patch 4 ^{CODESYS Forge talk (Post)}
Hi, I wanted to use the Adafruit Hat for the Raspberry and get acquainted with Softmotion using servos for RC models. This did work great with Codesys 3.5.19 Patch 1, but with Patch 4 and 5 i get errors. I suspect changes in the SoftMotion library have broken dependencies in the legacy drivers, might that be true? Thanks for any hint, spiessli Here the error log: ------ Übersetzungslauf gestartet: Applikation: Device.Application ------- Code typisieren... Code erzeugen... [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet Übersetzung abgeschlossen -- 15 Fehler, 0 Warnungen : Kein Download möglich
Last updated: 2023-12-19

Post by ara32 on CODESYS 4 Linux: ^{CODESYS Forge talk (Post)}
Hello! I managed to correctly launch CODESYS Developer Studio 3.5.17, almost all functionality works. The only issue remaining is that when connecting to a device and obtaining its public key, the NCryptEncrypt function is called, which is not fully implemented in the DLL source code, resulting in the connection not being established. Currently, the code of this function in the Wine repository looks like this: SECURITY_STATUS WINAPI NCryptEncrypt(NCRYPT_KEY_HANDLE key, BYTE *input, DWORD insize, void *padding, BYTE *output, DWORD outsize, DWORD *result, DWORD flags) { struct object *key_object = (struct object *)key; TRACE("(%#Ix, %p, %lu, %p, %p, %lu, %p, %#lx)\n", key, input, insize, padding, output, outsize, result, flags); if (flags & ~(NCRYPT_NO_PADDING_FLAG | NCRYPT_PAD_OAEP_FLAG | NCRYPT_PAD_PKCS1_FLAG | NCRYPT_SILENT_FLAG)) { FIXME("Flags %lx not supported\n", flags); return NTE_BAD_FLAGS; } if (flags & NCRYPT_NO_PADDING_FLAG || flags & NCRYPT_PAD_OAEP_FLAG) { FIXME("No padding and oaep padding not supported\n"); return NTE_NOT_SUPPORTED; } if (key_object->type != KEY) return NTE_INVALID_HANDLE; return map_ntstatus(BCryptEncrypt(key_object->key.bcrypt_key, input, insize, padding, NULL, 0, output, outsize, result, flags)); } The program crashes due to the NCRYPT_PAD_OAEP_FLAG flag. I'm not proficient in C++, but I attempted to add handling myself, and here's the result: SECURITY_STATUS WINAPI NCryptEncrypt(NCRYPT_KEY_HANDLE key, BYTE *input, DWORD insize, void *padding, BYTE *output, DWORD outsize, DWORD *result, DWORD flags) { struct object *key_object = (struct object *)key; TRACE("(%#Ix, %p, %lu, %p, %p, %lu, %p, %#lx)\n", key, input, insize, padding, output, outsize, result, flags); if (flags & ~(NCRYPT_NO_PADDING_FLAG | NCRYPT_PAD_OAEP_FLAG | NCRYPT_PAD_PKCS1_FLAG | NCRYPT_SILENT_FLAG)) { FIXME("Flags %lx not supported\n", flags); return NTE_BAD_FLAGS; } if (flags & NCRYPT_NO_PADDING_FLAG) { FIXME("No padding not supported\n"); return NTE_NOT_SUPPORTED; } BCRYPT_OAEP_PADDING_INFO oaepInfo = { 0 }; oaepInfo.pszAlgId = BCRYPT_SHA1_ALGORITHM; NTSTATUS status = BCryptEncrypt(key_object->key.bcrypt_key, input, insize, &oaepInfo, NULL, 0, output, outsize, result, flags); if (key_object->type != KEY) return NTE_INVALID_HANDLE; return map_ntstatus(BCryptEncrypt(key_object->key.bcrypt_key, input, insize, padding, NULL, 0, output, outsize, result, flags)); } Now, when calling the connection, it crashes with the error "bcrypt:BCryptEncrypt flags 0x4 not implemented." Can anyone help with enhancing this functionality or at least point me in the right direction?
Last updated: 2024-03-22

Post by alexgooi on OPC-UA and other communication questions ^{CODESYS Forge talk (Post)}
Dear forum, I currently have a big question mark above my head, and maybe this forum can shine some light on the situation. I recently updated to Codesys 3.15 SP19 Patch 6. And now I’m trying to setup the OPC-UA server, besides that I’m trying to connect to the controller with the Codesys V3 (Ethernet) protocol. OPC-UA I have installed the correct licenses on my controller (Runtime and communication). I’m able to connect to the controller with an OPC-UA client, and I’m able to browse the tags, so far so good. Therefore I’m assuming that the OPC-UA server is running on the controller. But now the strange part, in the device security settings I have set the communication Policy to BASCI256SHA256 ( I also have tried the other ones) and the communication mode is set to secure if possible (I also have tried all the other ones) (see picture). With these settings I would assume that I would only be able to login with a Basic256SHA256 policy with a client. But the opposite is true, I am able to login using the no policy mode and when I set it to Basic256SHA256 the client (UA-Expert) notes that this policy is not available on the server. I then check the certificates and I noted that there is no certificate for the OPC-UA server, I tried to generate one but it gave the error that the certificate has not been created by the device (See picture). To summarize I have no clue what is going on, and the controller does the opposite of what I would expect. Codesys Ethernet V3 driver I have a HMI connected to the same controller using the Ethernet V3 driver. But this will not connect. I tried all the Protocols (see picture), with and without the username and password enabled. But it will not connect, when I scan the available servers I can see the controller with the port number that I am expecting, so I’m assuming that the Codesys V3 ethernet driver is up on the controller. Does anyone can give me some direction, because the stuff that I tried doesn’t make sense to me. Thank you in advance
Last updated: 2024-04-02

Post by denizerm on Deploy Control SL cant find Podman ^{CODESYS Forge talk (Post)}
Hello, CODESYS seems to have problems finding the container engine. In the "Deploy Control SL" window, after connecting via ssh, it simply says: [INFORMATION] Connected successfully! [INFORMATION] Successfully connected to target (192.168.4.199) [WARNING] Error detecting container architecture running podman info yields normal results. My podman info output is as follows: home/Admin$ podman info host: arch: amd64 buildahVersion: 1.35.3 cgroupControllers: - cpu - memory - pids cgroupManager: systemd cgroupVersion: v2 conmon: package: Unknown path: /usr/bin/conmon version: 'conmon version 2.1.10, commit: affab49967eb62f75d2a47398344ab053326289f' cpuUtilization: idlePercent: 99.36 systemPercent: 0.3 userPercent: 0.34 cpus: 4 databaseBackend: sqlite distribution: codename: scarthgap distribution: redagv version: 1.0.0 eventLogger: journald freeLocks: 2040 hostname: secure-automation-os idMappings: gidmap: - container_id: 0 host_id: 1000 size: 1 - container_id: 1 host_id: 100000 size: 65536 uidmap: - container_id: 0 host_id: 1100 size: 1 - container_id: 1 host_id: 100000 size: 65536 kernel: 6.6.65-intel-pk-standard linkmode: dynamic logDriver: journald memFree: 6115598336 memTotal: 8086278144 networkBackend: cni networkBackendInfo: backend: cni dns: {} ociRuntime: name: crun package: Unknown path: /usr/bin/crun version: |- crun version 1.14.3.0.0.0.8-89d44-dirty commit: 89d44467e3b410b73f2065756a12789be45b855b rundir: /run/user/1100/crun spec: 1.0.0 +SYSTEMD +SELINUX +APPARMOR +CAP +SECCOMP +EBPF +YAJL os: linux pasta: executable: /usr/bin/pasta package: Unknown version: "" remoteSocket: exists: true path: /run/podman-shared/podman.sock security: apparmorEnabled: false capabilities: CAP_CHOWN,CAP_DAC_OVERRIDE,CAP_FOWNER,CAP_FSETID,CAP_KILL,CAP_NET_BIND_SERVICE,CAP_SETFCAP,CAP_SETGID,CAP_SETPCAP,CAP_SETUID,CAP_SYS_CHROOT rootless: true seccompEnabled: true seccompProfilePath: "" selinuxEnabled: false serviceIsRemote: true slirp4netns: executable: /usr/bin/slirp4netns package: Unknown version: |- slirp4netns version 1.2.0-beta.0+dev commit: unknown libslirp: 4.7.0 SLIRP_CONFIG_VERSION_MAX: 4 libseccomp: 2.5.5 swapFree: 0 swapTotal: 0 uptime: 1h 36m 10.00s (Approximately 0.04 days) variant: "" plugins: authorization: null log: - k8s-file - none - passthrough - journald network: - bridge - macvlan - ipvlan volume: - local registries: localhost:5000: Blocked: false Insecure: true Location: localhost:5000 MirrorByDigestOnly: false Mirrors: null Prefix: localhost:5000 PullFromMirror: "" search: - localhost store: configFile: /home/serviceuser/.config/containers/storage.conf containerStore: number: 2 paused: 0 running: 2 stopped: 0 graphDriverName: overlay graphOptions: {} graphRoot: /data/containerfiles graphRootAllocated: 119952025600 graphRootUsed: 13801246720 graphStatus: Backing Filesystem: extfs Native Overlay Diff: "true" Supports d_type: "true" Supports shifting: "false" Supports volatile: "true" Using metacopy: "false" imageCopyTmpDir: /var/tmp imageStore: number: 4 runRoot: /run/user/1100/containers transientStore: false volumePath: /data/containerfiles/volumes version: APIVersion: 5.0.2-dev Built: 1711987427 BuiltTime: Mon Apr 1 16:03:47 2024 GitCommit: bb81e85a430fa95d23a15b77c717fd68bf06ebf2 GoVersion: go1.22.12 Os: linux
Last updated: 2025-10-22

Post by struccc on Wish: CODESYSControl.cfg - again ^{CODESYS Forge talk (Post)}
Before creating this topic, I was browsing the search results for CodesysControl.cfg - many results, and I remember very well, it's a problematic issue for a long time. To summarize: there were many requests for documentation on this file - the most comprehensive reply is: https://forge.codesys.com/forge/talk/Runtime/thread/ebbf851a3d/#eb85 Hi, not really, this is covered by the manual which you get if you use a runtime toolkit which is not free of charge. Maybe we need to extract the config file part from that documentation if that is possible. BR Edwin I am not sure how much is this relevant, since we buy SL License directly from CODESYS... I think it is a reasonable demand, to get documentation on the configuration entries affecting the documented behaviour of the runtime system and it's components The actual reason I bring up this issue again can be read here: https://forge.codesys.com/forge/talk/Runtime/thread/febad3cc40/#0e12 but mostly my frustration about noticing some new, unknown and undocumented entries in my configuration file. Again. And this happens a lot recently. Just some examples: Changes with SysFile - and mandatory use of IEC path Introduction of Mandatory user management File transfer service now disabled by default SysProcess - allowed commands The above mentioned CmpApp parameters... And finally (Regaridng windows install): With the newer versions, the installation directory (together with the configuration file) tends to hide itself to some super silly location under the roaming profile data of local system account. I am not sure if this change was documented somewhere, but was a very unpleasant one. Someone could please explain the reason and the concept of the introduction of this release specific directories (I am sure, there is a good reason) - how to use them properly? - How to re-introduce user configuration (to preserve configuration data between versions)? - How to do version - to version migrations properly? - How to keep old version of runtime available and ready to start with it's original configuration and application? - ... Therefore, the lack a regularly updated description of CodesysControl .cfg , including all the configuration entries, together with their default values for different runtime versions is really a big deficiency.* This should be done for all components storing or just seeking data from this file... (Maybe there is such thing but I failed to find???) It is regularly causing trouble when introducing a new version (together with the long awaited bug fixes and enhancements), what has changed it's default behaviour for security or other practical reasons. I agree this is very important, and it is logical to change the default options: But it must be documented historically, and make it easily available, so we can prepare better for the upgrade of the runtime. Forge talk is a great source, but not very practical for this kind of documentation purposes... Thanks in advance for CODESYS staff 🙏🙏🙏 (Ps.: It would look rather silly, if some members of the user community prepares this documentation on a Forge Wiki page... Or??? Should we?)
Last updated: 2024-11-21

Post by munwar on ^^Temu Coupon {{UK}} ^£100 off^ [^^"["acq794628"]^^"] for New and Existing Customers^.^££ ^{CODESYS Forge talk (Post)}
Temu Exclusive Discount: Unlock Unbeatable Savings Now! Are you ready to take your shopping experience to the next level? Look no further! Temu, the popular online marketplace, is offering an exclusive discount that will blow your mind. For a limited time, you can unlock a whopping $100 off, a flat $550 off, and an additional 30% off your purchase. Yes, you read that right! To redeem this incredible offer, simply at checkout. How to Redeem the Discount Redeeming the Temu exclusive discount is easy. Here's a step-by-step guide: Head to the Temu website and browse through the vast selection of products. Add your desired items to the cart and proceed to checkout. Enter the coupon code acq794628 in the designated field. Click "Apply" to unlock the discounts. Enjoy your savings! makeup, and more With this exclusive discount, you can treat yourself to something special or stock up on essentials. Whether you're looking for a new outfit, a cutting-edge gadget, or a home decor item, Temu has got you covered. Don't Miss Out! This offer is only valid for a limited time, so don't wait! Use the coupon code acq794628 now and unlock the incredible discounts. Temu's exclusive offer is the perfect opportunity to save big on your favorite products. Don't miss out on this chance to upgrade your shopping experience. What Can You Buy with This Discount? Temu offers a wide range of products across various categories, including: Fashion: clothing, shoes, accessories, and more Electronics: smartphones, laptops, gadgets, and more Home and Garden: furniture, decor, kitchenware, and more Beauty and Health: skincare, haircare, makeup, and more With this exclusive discount, you can treat yourself to something special or stock up on essentials. Whether you're looking for a new outfit, a cutting-edge gadget, or a home decor item, Temu has got you covered. Terms and Conditions Please note that this offer is subject to terms and conditions. The discount may not be valid on certain products or in conjunction with other promotions. Be sure to check the Temu website for full details. In conclusion, the Temu exclusive discount is an unbeatable offer that you won't want to miss. With $100 off, a flat $550 off, and an additional 30% off, you can enjoy massive savings on your favorite products. Use the coupon code acq794628 now and start shopping! Temu Coupon Code $100 Off {acq794628}Temu Coupon Code 40 Off {acq794628}Temu Coupon Code 50 Off {acq794628}Temu Coupon Code 70 Off {acq794628}Temu Coupon Code 90 Off {acq794628}Temu Coupon Code 30 Off {acq794628} Temu Coupon Code First Order {acq794628} Temu Coupon Code Existing User {acq794628} TEMU COUPON $100 OFF -acq794628 Temu Free Gift Code - acq794628 TEMU Free Gift Code FOR EXISTING CUSTOMERS acq794628 TEMU Free Gift Code FIRST ORDER -acq794628 TEMU Free Gift Code REDDIT -acq794628 TEMU Free Gift Code FOR EXISTING CUSTOMERS REDDIT -acq794628 TEMU COUPON $100 Free Gift Code OFF NEW USER -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS 2024 -acq794628 TEMU COUPON $100 OFF CODE -acq794628 TEMU COUPON $100 OFF FIRST ORDER FREE SHIPPING -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING USA -acq794628 TEMU COUPON $100 OFF HOW DOES IT WORK -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS CANADA -acq794628 TEMU COUPON $100 OFF 2024 -acq794628 TEMU COUPON $100 OFF FOR NEW CUSTOMERS -acq794628 TEMU COUPON $100 OFF CANADA -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FIRST ORDER - acq794628 TEMU 300 OFF COUPON BUNDLE -acq794628 300 COUPON CODES -acq794628 1 BUCKS TO PHP -acq794628 IS THERE A COUPON IN THE PHILIPPINES -acq794628 300 BUCKS TO PHP -acq794628 TEMU $100 OFF COUPON -acq794628 TEMU $100 OFF CODE -acq794628 TEMU 300 VALUE COUPON BUNDLE -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING -acq794628 TEMU Free Gift CODE LEGIT -acq794628 TEMU Free Gift CODE REDDIT -acq794628 TEMU 300 OFF COUPON CODE FOR EXISTING USERS -acq794628 TEMU Free Gift Code UK -acq794628 TEMU COUPON CODE $100 OFF FREE SHIPPING -acq794628 TEMU COUPON CODES 300 PERCENT OFF -acq794628 WHAT IS A HIGH COUPON RATE -acq794628 HOW TO CALCULATE COUPON RATE WITHOUT COUPON PAYMENT -acq794628 WHAT IS THE COUPON RATE -acq794628 HOW TO CALCULATE COUPON VALUE -acq794628 USING COUPONS AND REBATES TO LOWER THE PRICE OF AN ITEM IS AN EXAMPLE OF - acq794628 TEMU 300 DOLLAR OFF COUPON - acq794628 DOMINOS COUPON CODE 300 OFF -acq794628 DOMINO'S 300 RS OFF COUPON CODE -acq794628 TEMU COUPON $100 OFF EXISTING CUSTOMERS -acq794628.
Last updated: 2024-10-26

Post by munwar on Temu Coupon Code |$100 off | Korea ➔ ["(["acq794628"]) ₩ Existing Users ^{CODESYS Forge talk (Post)}
Temu Exclusive Discount: Unlock Unbeatable Savings Now! Are you ready to take your shopping experience to the next level? Look no further! Temu, the popular online marketplace, is offering an exclusive discount that will blow your mind. For a limited time, you can unlock a whopping $100 off, a flat $550 off, and an additional 30% off your purchase. Yes, you read that right! To redeem this incredible offer, simply at checkout. How to Redeem the Discount Redeeming the Temu exclusive discount is easy. Here's a step-by-step guide: Head to the Temu website and browse through the vast selection of products. Add your desired items to the cart and proceed to checkout. Enter the coupon code acq794628 in the designated field. Click "Apply" to unlock the discounts. Enjoy your savings! makeup, and more With this exclusive discount, you can treat yourself to something special or stock up on essentials. Whether you're looking for a new outfit, a cutting-edge gadget, or a home decor item, Temu has got you covered. Don't Miss Out! This offer is only valid for a limited time, so don't wait! Use the coupon code acq794628 now and unlock the incredible discounts. Temu's exclusive offer is the perfect opportunity to save big on your favorite products. Don't miss out on this chance to upgrade your shopping experience. What Can You Buy with This Discount? Temu offers a wide range of products across various categories, including: Fashion: clothing, shoes, accessories, and more Electronics: smartphones, laptops, gadgets, and more Home and Garden: furniture, decor, kitchenware, and more Beauty and Health: skincare, haircare, makeup, and more With this exclusive discount, you can treat yourself to something special or stock up on essentials. Whether you're looking for a new outfit, a cutting-edge gadget, or a home decor item, Temu has got you covered. Terms and Conditions Please note that this offer is subject to terms and conditions. The discount may not be valid on certain products or in conjunction with other promotions. Be sure to check the Temu website for full details. In conclusion, the Temu exclusive discount is an unbeatable offer that you won't want to miss. With $100 off, a flat $550 off, and an additional 30% off, you can enjoy massive savings on your favorite products. Use the coupon code acq794628 now and start shopping! Temu Coupon Code $100 Off {acq794628}Temu Coupon Code 40 Off {acq794628}Temu Coupon Code 50 Off {acq794628}Temu Coupon Code 70 Off {acq794628}Temu Coupon Code 90 Off {acq794628}Temu Coupon Code 30 Off {acq794628} Temu Coupon Code First Order {acq794628} Temu Coupon Code Existing User {acq794628} TEMU COUPON $100 OFF -acq794628 Temu Free Gift Code - acq794628 TEMU Free Gift Code FOR EXISTING CUSTOMERS acq794628 TEMU Free Gift Code FIRST ORDER -acq794628 TEMU Free Gift Code REDDIT -acq794628 TEMU Free Gift Code FOR EXISTING CUSTOMERS REDDIT -acq794628 TEMU COUPON $100 Free Gift Code OFF NEW USER -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS 2024 -acq794628 TEMU COUPON $100 OFF CODE -acq794628 TEMU COUPON $100 OFF FIRST ORDER FREE SHIPPING -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING USA -acq794628 TEMU COUPON $100 OFF HOW DOES IT WORK -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS CANADA -acq794628 TEMU COUPON $100 OFF 2024 -acq794628 TEMU COUPON $100 OFF FOR NEW CUSTOMERS -acq794628 TEMU COUPON $100 OFF CANADA -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FIRST ORDER - acq794628 TEMU 300 OFF COUPON BUNDLE -acq794628 300 COUPON CODES -acq794628 1 BUCKS TO PHP -acq794628 IS THERE A COUPON IN THE PHILIPPINES -acq794628 300 BUCKS TO PHP -acq794628 TEMU $100 OFF COUPON -acq794628 TEMU $100 OFF CODE -acq794628 TEMU 300 VALUE COUPON BUNDLE -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING -acq794628 TEMU Free Gift CODE LEGIT -acq794628 TEMU Free Gift CODE REDDIT -acq794628 TEMU 300 OFF COUPON CODE FOR EXISTING USERS -acq794628 TEMU Free Gift Code UK -acq794628 TEMU COUPON CODE $100 OFF FREE SHIPPING -acq794628 TEMU COUPON CODES 300 PERCENT OFF -acq794628 WHAT IS A HIGH COUPON RATE -acq794628 HOW TO CALCULATE COUPON RATE WITHOUT COUPON PAYMENT -acq794628 WHAT IS THE COUPON RATE -acq794628 HOW TO CALCULATE COUPON VALUE -acq794628 USING COUPONS AND REBATES TO LOWER THE PRICE OF AN ITEM IS AN EXAMPLE OF - acq794628 TEMU 300 DOLLAR OFF COUPON - acq794628 DOMINOS COUPON CODE 300 OFF -acq794628 DOMINO'S 300 RS OFF COUPON CODE -acq794628 TEMU COUPON $100 OFF EXISTING CUSTOMERS -acq794628.
Last updated: 2024-10-26

Post by munwar on Temu Coupon Code |^•^100% off^•^| [^•^╭⁠☞ {acq794628^•^] for New and Existing Customers. ^{CODESYS Forge talk (Post)}
ready to elevate your shopping experience with Temu's incredible offers! Use our exclusive Temu coupon code $100 off [acq794628] for existing customers or for new users to enjoy massive savings on your next purchase. Temu: Your Gateway to Unbeatable Deals Temu has taken the e-commerce world by storm, offering a vast array of products at jaw-dropping prices. With free shipping to 67 countries and lightning-fast delivery, it's no wonder Temu has become a go-to destination for savvy shoppers. . But the savings don't stop there – let's explore how you can maximize your discounts with our Temu coupon $100 off for existing customers! Exclusive Temu Coupon Codes for Maximum Savings Here's a quick rundown of our top Temu coupon codes: • acq794628: Temu coupon code $100 off for new users • acq794628: Temu coupon $100 off for customers • acq794628: Temu $100 extra off (Temu 100$ coupon code) • acq794628: $100 discount for new users (100 off Temu coupon) • acq794628: $100 coupon for existing and new users (Temu coupon code 100 off) Why Choose Temu? Before we dive deeper into the Temu $100 coupon bundle, let's look at what makes Temu stand out: 1. Vast product selection 2. Unbeatable prices 3. Fast and free shipping 4. User-friendly platform 5. Regular promotions and discounts How to Use Your Temu Coupon Code $100 Off Using your Temu coupon code $100 off is a breeze. Here's a step-by-step guide to help you make the most of your savings: 1. Browse Temu's extensive catalog 2. Add items to your cart 3. Proceed to checkout 4. Enter your Temu coupon code $100 off in the designated field 5. Watch your total drop by $100! Tips for Maximizing Your Savings To get the most bang for your buck,. consider these strategies: 1. Combine your Temu coupon $100 off with ongoing sales 2. Look for bundle deals to increase your savings 3. Check Temu's daily deals for additional discounts 4. Sign up for Temu's newsletter to stay informed about upcoming promotions Temu Coupon $100 Off: Frequently Asked Questions You might be wondering about the details of these incredible offers. Let's address some common questions: Is the Temu $100 off coupon legit? Absolutely! The Temu 100 off coupon is legit and has been verified by countless happy customers. You can shop with confidence knowing that your Temu coupon code $100 off will be honored at checkout. Can I use the Temu coupon $100 off for existing customers on my first order? While the Temu coupon $100 off for existing customers is designed for repeat shoppers, new users can take advantage of the Temu coupon code $100 off for new users. Both offers provide the same great savings! How often can I use a Temu coupon $100 off? Typically, these coupons are one-time use per account. However, Temu frequently releases new promotions, so keep an eye out for fresh opportunities to save! Explore Temu's Best Deals with Your $100 Off Coupon Now that you're armed with your Temu coupon code $100 off, let's look at some popular categories where you can apply your savings: • Electronics • Fashion • Home & Garden • Beauty & Personal Care • Sports & Outdoors Hot Deals Alert: Temu Coupon Codes Don't miss out on these amazing offers: • acq794628: Temu coupon $100 off for existing customers free shipping • acq794628: Temu coupon $100 off for new users • acq794628: Temu coupon codes 100 off • acq794628: Temu coupon $100 off code • acq794628: Temu coupon $100 off first-time user Make the Most of Your Temu Shopping Experience As you explore Temu's vast catalog with your Temu coupon $100 off in hand, keep these tips in mind: 1. Read product reviews from other customers 2. Check sizing charts for clothing and shoes 3. Compare similar items to find the best value 4. Take advantage of Temu's customer service for any questions The Temu Difference What sets Temu apart from other e-commerce platforms? It's not just about the Temu $100 coupon bundle – it's the overall shopping experience. With a user-friendly interface, a wide range of products, and unbeatable prices, Temu is revolutionizing online shopping. I've been using Temu for months now, and I can confidently say that the savings are real. Whether you're a new user looking to score a great deal with a Temu coupon code $100 off first order or an existing customer ready to use your Temu coupon $100 off for existing customers first order, you're in for a treat. Conclusion: Shop Smart with Temu In today's economy, finding ways to save money without sacrificing quality is crucial. That's why I'm thrilled to share these Temu coupon $100 off opportunities with you. Whether you're shopping for yourself or looking for the perfect gift, Temu has you covered. Remember, the key to maximizing your savings is to stay informed about the latest promotions. Bookmark this page and check back regularly for updates on Temu coupon codes and deals. And don't forget – your Temu coupon code $100 off [acq794628] for existing customers is waiting to be used! Happy shopping, and enjoy your incredible savings with Temu! .
Last updated: 2024-10-26

Post by munwar on Temu coupon code ⁠╭⁠☞ {acq794628}: ||^°$100 off.^° || ^{CODESYS Forge talk (Post)}
ready to elevate your shopping experience with Temu's incredible offers! Use our exclusive Temu coupon code $100 off [acq794628] for existing customers or for new users to enjoy massive savings on your next purchase. Temu: Your Gateway to Unbeatable Deals Temu has taken the e-commerce world by storm, offering a vast array of products at jaw-dropping prices. With free shipping to 67 countries and lightning-fast delivery, it's no wonder Temu has become a go-to destination for savvy shoppers. . But the savings don't stop there – let's explore how you can maximize your discounts with our Temu coupon $100 off for existing customers! Exclusive Temu Coupon Codes for Maximum Savings Here's a quick rundown of our top Temu coupon codes: • acq794628: Temu coupon code $100 off for new users • acq794628: Temu coupon $100 off for customers • acq794628: Temu $100 extra off (Temu 100$ coupon code) • acq794628: $100 discount for new users (100 off Temu coupon) • acq794628: $100 coupon for existing and new users (Temu coupon code 100 off) Why Choose Temu? Before we dive deeper into the Temu $100 coupon bundle, let's look at what makes Temu stand out: 1. Vast product selection 2. Unbeatable prices 3. Fast and free shipping 4. User-friendly platform 5. Regular promotions and discounts How to Use Your Temu Coupon Code $100 Off Using your Temu coupon code $100 off is a breeze. Here's a step-by-step guide to help you make the most of your savings: 1. Browse Temu's extensive catalog 2. Add items to your cart 3. Proceed to checkout 4. Enter your Temu coupon code $100 off in the designated field 5. Watch your total drop by $100! Tips for Maximizing Your Savings To get the most bang for your buck,. consider these strategies: 1. Combine your Temu coupon $100 off with ongoing sales 2. Look for bundle deals to increase your savings 3. Check Temu's daily deals for additional discounts 4. Sign up for Temu's newsletter to stay informed about upcoming promotions Temu Coupon $100 Off: Frequently Asked Questions You might be wondering about the details of these incredible offers. Let's address some common questions: Is the Temu $100 off coupon legit? Absolutely! The Temu 100 off coupon is legit and has been verified by countless happy customers. You can shop with confidence knowing that your Temu coupon code $100 off will be honored at checkout. Can I use the Temu coupon $100 off for existing customers on my first order? While the Temu coupon $100 off for existing customers is designed for repeat shoppers, new users can take advantage of the Temu coupon code $100 off for new users. Both offers provide the same great savings! How often can I use a Temu coupon $100 off? Typically, these coupons are one-time use per account. However, Temu frequently releases new promotions, so keep an eye out for fresh opportunities to save! Explore Temu's Best Deals with Your $100 Off Coupon Now that you're armed with your Temu coupon code $100 off, let's look at some popular categories where you can apply your savings: • Electronics • Fashion • Home & Garden • Beauty & Personal Care • Sports & Outdoors Hot Deals Alert: Temu Coupon Codes Don't miss out on these amazing offers: • acq794628: Temu coupon $100 off for existing customers free shipping • acq794628: Temu coupon $100 off for new users • acq794628: Temu coupon codes 100 off • acq794628: Temu coupon $100 off code • acq794628: Temu coupon $100 off first-time user Make the Most of Your Temu Shopping Experience As you explore Temu's vast catalog with your Temu coupon $100 off in hand, keep these tips in mind: 1. Read product reviews from other customers 2. Check sizing charts for clothing and shoes 3. Compare similar items to find the best value 4. Take advantage of Temu's customer service for any questions The Temu Difference What sets Temu apart from other e-commerce platforms? It's not just about the Temu $100 coupon bundle – it's the overall shopping experience. With a user-friendly interface, a wide range of products, and unbeatable prices, Temu is revolutionizing online shopping. I've been using Temu for months now, and I can confidently say that the savings are real. Whether you're a new user looking to score a great deal with a Temu coupon code $100 off first order or an existing customer ready to use your Temu coupon $100 off for existing customers first order, you're in for a treat. Conclusion: Shop Smart with Temu In today's economy, finding ways to save money without sacrificing quality is crucial. That's why I'm thrilled to share these Temu coupon $100 off opportunities with you. Whether you're shopping for yourself or looking for the perfect gift, Temu has you covered. Remember, the key to maximizing your savings is to stay informed about the latest promotions. Bookmark this page and check back regularly for updates on Temu coupon codes and deals. And don't forget – your Temu coupon code $100 off [acq794628] for existing customers is waiting to be used! Happy shopping, and enjoy your incredible savings with Temu! .
Last updated: 2024-10-26

Post by munwar on Temu Coupon ((Canada)) | $100 off | ["acq794628"] for New and Existing Customers ^.^ ^{CODESYS Forge talk (Post)}
Temu Exclusive Discount: Unlock Unbeatable Savings Now! Are you ready to take your shopping experience to the next level? Look no further! Temu, the popular online marketplace, is offering an exclusive discount that will blow your mind. For a limited time, you can unlock a whopping $100 off, a flat $550 off, and an additional 30% off your purchase. Yes, you read that right! To redeem this incredible offer, simply at checkout. How to Redeem the Discount Redeeming the Temu exclusive discount is easy. Here's a step-by-step guide: Head to the Temu website and browse through the vast selection of products. Add your desired items to the cart and proceed to checkout. Enter the coupon code acq794628 in the designated field. Click "Apply" to unlock the discounts. Enjoy your savings! makeup, and more With this exclusive discount, you can treat yourself to something special or stock up on essentials. Whether you're looking for a new outfit, a cutting-edge gadget, or a home decor item, Temu has got you covered. Don't Miss Out! This offer is only valid for a limited time, so don't wait! Use the coupon code acq794628 now and unlock the incredible discounts. Temu's exclusive offer is the perfect opportunity to save big on your favorite products. Don't miss out on this chance to upgrade your shopping experience. What Can You Buy with This Discount? Temu offers a wide range of products across various categories, including: Fashion: clothing, shoes, accessories, and more Electronics: smartphones, laptops, gadgets, and more Home and Garden: furniture, decor, kitchenware, and more Beauty and Health: skincare, haircare, makeup, and more With this exclusive discount, you can treat yourself to something special or stock up on essentials. Whether you're looking for a new outfit, a cutting-edge gadget, or a home decor item, Temu has got you covered. Terms and Conditions Please note that this offer is subject to terms and conditions. The discount may not be valid on certain products or in conjunction with other promotions. Be sure to check the Temu website for full details. In conclusion, the Temu exclusive discount is an unbeatable offer that you won't want to miss. With $100 off, a flat $550 off, and an additional 30% off, you can enjoy massive savings on your favorite products. Use the coupon code acq794628 now and start shopping! Temu Coupon Code $100 Off {acq794628}Temu Coupon Code 40 Off {acq794628}Temu Coupon Code 50 Off {acq794628}Temu Coupon Code 70 Off {acq794628}Temu Coupon Code 90 Off {acq794628}Temu Coupon Code 30 Off {acq794628} Temu Coupon Code First Order {acq794628} Temu Coupon Code Existing User {acq794628} TEMU COUPON $100 OFF -acq794628 Temu Free Gift Code - acq794628 TEMU Free Gift Code FOR EXISTING CUSTOMERS acq794628 TEMU Free Gift Code FIRST ORDER -acq794628 TEMU Free Gift Code REDDIT -acq794628 TEMU Free Gift Code FOR EXISTING CUSTOMERS REDDIT -acq794628 TEMU COUPON $100 Free Gift Code OFF NEW USER -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS 2024 -acq794628 TEMU COUPON $100 OFF CODE -acq794628 TEMU COUPON $100 OFF FIRST ORDER FREE SHIPPING -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING USA -acq794628 TEMU COUPON $100 OFF HOW DOES IT WORK -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS CANADA -acq794628 TEMU COUPON $100 OFF 2024 -acq794628 TEMU COUPON $100 OFF FOR NEW CUSTOMERS -acq794628 TEMU COUPON $100 OFF CANADA -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FIRST ORDER - acq794628 TEMU 300 OFF COUPON BUNDLE -acq794628 300 COUPON CODES -acq794628 1 BUCKS TO PHP -acq794628 IS THERE A COUPON IN THE PHILIPPINES -acq794628 300 BUCKS TO PHP -acq794628 TEMU $100 OFF COUPON -acq794628 TEMU $100 OFF CODE -acq794628 TEMU 300 VALUE COUPON BUNDLE -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING -acq794628 TEMU Free Gift CODE LEGIT -acq794628 TEMU Free Gift CODE REDDIT -acq794628 TEMU 300 OFF COUPON CODE FOR EXISTING USERS -acq794628 TEMU Free Gift Code UK -acq794628 TEMU COUPON CODE $100 OFF FREE SHIPPING -acq794628 TEMU COUPON CODES 300 PERCENT OFF -acq794628 WHAT IS A HIGH COUPON RATE -acq794628 HOW TO CALCULATE COUPON RATE WITHOUT COUPON PAYMENT -acq794628 WHAT IS THE COUPON RATE -acq794628 HOW TO CALCULATE COUPON VALUE -acq794628 USING COUPONS AND REBATES TO LOWER THE PRICE OF AN ITEM IS AN EXAMPLE OF - acq794628 TEMU 300 DOLLAR OFF COUPON - acq794628 DOMINOS COUPON CODE 300 OFF -acq794628 DOMINO'S 300 RS OFF COUPON CODE -acq794628 TEMU COUPON $100 OFF EXISTING CUSTOMERS -acq794628.
Last updated: 2024-10-26

Post by munwar on | Temu Coupon Code Portugal | ⏭ ["^"acq794628"^"] ||"€100 off"|| New Users. ^{CODESYS Forge talk (Post)}
Temu Exclusive Discount: Unlock Unbeatable Savings Now! Are you ready to take your shopping experience to the next level? Look no further! Temu, the popular online marketplace, is offering an exclusive discount that will blow your mind. For a limited time, you can unlock a whopping $100 off, a flat $550 off, and an additional 30% off your purchase. Yes, you read that right! To redeem this incredible offer, simply at checkout. How to Redeem the Discount Redeeming the Temu exclusive discount is easy. Here's a step-by-step guide: Head to the Temu website and browse through the vast selection of products. Add your desired items to the cart and proceed to checkout. Enter the coupon code acq794628 in the designated field. Click "Apply" to unlock the discounts. Enjoy your savings! makeup, and more With this exclusive discount, you can treat yourself to something special or stock up on essentials. Whether you're looking for a new outfit, a cutting-edge gadget, or a home decor item, Temu has got you covered. Don't Miss Out! This offer is only valid for a limited time, so don't wait! Use the coupon code acq794628 now and unlock the incredible discounts. Temu's exclusive offer is the perfect opportunity to save big on your favorite products. Don't miss out on this chance to upgrade your shopping experience. What Can You Buy with This Discount? Temu offers a wide range of products across various categories, including: Fashion: clothing, shoes, accessories, and more Electronics: smartphones, laptops, gadgets, and more Home and Garden: furniture, decor, kitchenware, and more Beauty and Health: skincare, haircare, makeup, and more With this exclusive discount, you can treat yourself to something special or stock up on essentials. Whether you're looking for a new outfit, a cutting-edge gadget, or a home decor item, Temu has got you covered. Terms and Conditions Please note that this offer is subject to terms and conditions. The discount may not be valid on certain products or in conjunction with other promotions. Be sure to check the Temu website for full details. In conclusion, the Temu exclusive discount is an unbeatable offer that you won't want to miss. With $100 off, a flat $550 off, and an additional 30% off, you can enjoy massive savings on your favorite products. Use the coupon code acq794628 now and start shopping! Temu Coupon Code $100 Off {acq794628}Temu Coupon Code 40 Off {acq794628}Temu Coupon Code 50 Off {acq794628}Temu Coupon Code 70 Off {acq794628}Temu Coupon Code 90 Off {acq794628}Temu Coupon Code 30 Off {acq794628} Temu Coupon Code First Order {acq794628} Temu Coupon Code Existing User {acq794628} TEMU COUPON $100 OFF -acq794628 Temu Free Gift Code - acq794628 TEMU Free Gift Code FOR EXISTING CUSTOMERS acq794628 TEMU Free Gift Code FIRST ORDER -acq794628 TEMU Free Gift Code REDDIT -acq794628 TEMU Free Gift Code FOR EXISTING CUSTOMERS REDDIT -acq794628 TEMU COUPON $100 Free Gift Code OFF NEW USER -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS 2024 -acq794628 TEMU COUPON $100 OFF CODE -acq794628 TEMU COUPON $100 OFF FIRST ORDER FREE SHIPPING -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING USA -acq794628 TEMU COUPON $100 OFF HOW DOES IT WORK -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS CANADA -acq794628 TEMU COUPON $100 OFF 2024 -acq794628 TEMU COUPON $100 OFF FOR NEW CUSTOMERS -acq794628 TEMU COUPON $100 OFF CANADA -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FIRST ORDER - acq794628 TEMU 300 OFF COUPON BUNDLE -acq794628 300 COUPON CODES -acq794628 1 BUCKS TO PHP -acq794628 IS THERE A COUPON IN THE PHILIPPINES -acq794628 300 BUCKS TO PHP -acq794628 TEMU $100 OFF COUPON -acq794628 TEMU $100 OFF CODE -acq794628 TEMU 300 VALUE COUPON BUNDLE -acq794628 TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING -acq794628 TEMU Free Gift CODE LEGIT -acq794628 TEMU Free Gift CODE REDDIT -acq794628 TEMU 300 OFF COUPON CODE FOR EXISTING USERS -acq794628 TEMU Free Gift Code UK -acq794628 TEMU COUPON CODE $100 OFF FREE SHIPPING -acq794628 TEMU COUPON CODES 300 PERCENT OFF -acq794628 WHAT IS A HIGH COUPON RATE -acq794628 HOW TO CALCULATE COUPON RATE WITHOUT COUPON PAYMENT -acq794628 WHAT IS THE COUPON RATE -acq794628 HOW TO CALCULATE COUPON VALUE -acq794628 USING COUPONS AND REBATES TO LOWER THE PRICE OF AN ITEM IS AN EXAMPLE OF - acq794628 TEMU 300 DOLLAR OFF COUPON - acq794628 DOMINOS COUPON CODE 300 OFF -acq794628 DOMINO'S 300 RS OFF COUPON CODE -acq794628 TEMU COUPON $100 OFF EXISTING CUSTOMERS -acq794628.
Last updated: 2024-10-26

Sort by relevance or date