Post by trusty-squire on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
Just a stab in the dark, but you might want to check the Dynamic Limits (accel, decel, velocity, jerk) in the Codesys SoftMotion device configuration, as well as checking similar limits on your servo drive? Are you seeing any errors, or does the MC_SetPosition FB get marked as complete?
Last updated: 2025-01-09

Post by ekristoffe on Modbus UDP ^{CODESYS Forge talk (Post)}
UDP has no packet ordering mechanism, and Modbus protocol has no order checking mechanism nor session establishment. I'm sorry but this is false, Modbus IP based have the Transaction Identifier. Transaction Identifier - It is used for transaction pairing, the MODBUS server copies in the response the transaction identifier of the request. Modbus UDP make more sense than Modbus TCP in a local environment.
Last updated: 2025-01-14

Post by gseidel on The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Post)}
Hi imdatatas, thanks for your feedback. This change was intentional, as the quadratic ramp type has many advantages over the trapez ramptype. Sorry to hear it causes problems in your situation. Can you please shortly explain the nature of the problems? Best regards, Georg
Last updated: 2025-09-08

Post by nano on Modbus TCP/IP slave communication errow ^{CODESYS Forge talk (Post)}
please tell us the exact error message from diagnostic. U can view it at devicetree in the node-element diagnostic from modbus-configuration. u also can activate the function auto-reconnect in master and increase a little bit the timeout and the repetition to male thw communication a little bit more robust
Last updated: 2024-02-04

Post by ronaldcom-pac on Gif in WebVisu ^{CODESYS Forge talk (Post)}
I am looking for some help with using Gifs in the WebVisu of codesys 3.5.18.40 as the model we tried with ladder logic does not animate the Gif and leaves as the first image of the Gif. Is there a way for ST or LL for it to be animated?
Last updated: 2024-02-08

Post by aarondw10 on Use element properties ^{CODESYS Forge talk (Post)}
Assume I have a rectangle named rec1 from which I want to use the coordinates of the upper left corner. Is there a way to links these X and Y values from the properties to an integer defined in the main program? Note that I just want to use them and not change any of these coordinates in the program.
Last updated: 2024-02-29

Post by kumareasu on Persistent variable storage ^{CODESYS Forge talk (Post)}
Is there any function function block which can store the persistent variable in HDD/SSD immediatley. My observation is that the persistent variable is getting stored when we shut down or restart the system (Windows+ CoDeSys RTE SL ). the persistent variables are not stored in HDD/SSD, if I power off the system without proper shutdown. Seeking your feedback.
Last updated: 2024-06-12

Post by josealb2000 on EL6910 as a PROFIsafe F-Host in Codesys ^{CODESYS Forge talk (Post)}
Interested. I can see the EL6633 Profinet Controller can be added in Codesys to the EK1914 or EK1100, and then ProfiSafe devices can be added as the F-DI8/F-DQ3 ET200eco PN. Im unsure how to configure the telegram to the EL6910. Have you been able to make this configuration? EL6910 Manual shows a way but only using TwinSafe.
Last updated: 2025-10-23

Post by althafu on Codesys v 3.5 to factory IO ^{CODESYS Forge talk (Post)}
I have been following the steps shown in the RealPars video to connect CODESYS with Factory I/O. The connection works correctly when I use Ladder Diagram, but when I try the same simple input–output logic in Structured Text, the simulation does not behave as expected. Has anyone experienced this issue or knows what might be causing it?
Last updated: 2025-11-20

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
For small project, I would like to use my industrial computer as a PLC + Industrial Computer. Like that I can save the cost of one PLC. That why I am using Codesys on Linux. With the nic it is not working. I already set the IP adress with /etc/network/interfaces. Can it comes from there ? looking to "Control Linux SL" docuemntation it should work with rtu.
Last updated: 2024-10-23

Post by tk096 on High Cycle Times for SoftMotion_PlanningTask when using AxisGroup ^{CODESYS Forge talk (Post)}
Hi, under this circumstances the performance of a Raspberry Pi 4 should be sufficient to run a Softmotion robotics application. A closer look at the project would be required. Maybe you could contact the codesys support? Usually it is recommended to run the planning task cyclically every 2ms with task priority of 0 on a dedicated core. In the task configuration you can have a look at the average and maximum execution time of the planning task. You could use the function block SMC_TuneCPKernel (https://content.helpme-codesys.com/en/libs/SM3_Robotics/Current/SM3_Robotics/POUs/AdministrativeConfiguration/Computation/SMC_TuneCPKernel.html) to define suitable values for the parameters 'fSyncBufferDuration' and 'fPlanningInterval'. However, as previously mentioned, the performance of a Raspberry Pi 4 with realtime patch should be sufficient. The 'fPlanningInterval' parameter specifies the maximum planning step width in seconds. The cycle time of the planning task should not permanently exceed this value. A higher value reduces the computational effort, but can lead to a violation or no full utilization of the set limit values for velocity, acceleration and jerk. From a starting value of 0.016 seconds, the value should be increased gradually until the performance is acceptable. The parameter 'fSyncBufferDuration' specifies the size (in seconds) of the buffer between the planning and fieldbus task. The cycle time of the planning task must not exceed this value at peak times (this will lead to the error SMC_CP_QUEUE_UNDERRUN). A higher value can compensate for peaks in the cycle time of the planning task. At the same time, however, this also increases the latency for executing interrupts and aborting movements.
Last updated: 2024-03-22

Post by pwedel84 on Wago PLC Crashing and Cant Reconnect ^{CODESYS Forge talk (Post)}
Hi happychappy, Did you ever get figured out what your problem was or how to solve it? I am running into the same issues with the 750-880...
Last updated: 2024-07-30

Post by jinlee on IP Camera on the Webvisu ^{CODESYS Forge talk (Post)}
Hi guys, I am experiencing the issue that browser element can't show anything other than wbm of my PLC. I am using WAGO PFC200, trying to feed IP camera into web browser element. Can anyone helps me ? Kind regards, Jin
Last updated: 2024-09-12

Post by tk096 on High Cycle Times for SoftMotion_PlanningTask when using AxisGroup ^{CODESYS Forge talk (Post)}
Hi, you need a realtime capable plc. Codesys Control WinV3 is not realtime capable. https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_performance_optimization_linux.html The last chapter of https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_robotics_diagnosis_movement_problems.html deals with how to configure the planning task.
Last updated: 2024-03-13

Post by pasillalej on No gateway with the given settings could be found ^{CODESYS Forge talk (Post)}
Go to Online>Communication Parameters...>Gateway>TCP/IP> Click on "New..." and reestablish your connections with whatever IP address and set up information you have. Bypass whatever is necessary as you may have to redownload to the PLC.
Last updated: 2024-05-09

Post by ignat on SafetyApp - Exchange 8 bits from EtherCAT Safety Module to PLC mapping issue ^{CODESYS Forge talk (Post)}
Hi transmin01, I am struggling with the same issue. Have you found out the solution?
Last updated: 2024-06-17

Post by bruno-roth on Parker Compax3 controlled by Schneider LMC 201 ^{CODESYS Forge talk (Post)}
Hello, you could use any CODESYS PLC which has an EtherCAT master and the possibility to run the CODESYS Softmotion.
Last updated: 2026-01-13

Post by patrik on windows runtime crashes. ^{CODESYS Forge talk (Post)}
Faulting application name: CODESYSControlService.exe, version: 3.5.20.30, time stamp: 0x66ebc91d Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x0000028010670e31 Faulting process id: 0x0x1F50 Faulting application start time: 0x0x1DB1BA284347B9C Faulting application path: C:\Program Files\CODESYS 3.5.20.30\GatewayPLC\CODESYSControlService.exe Faulting module path: unknown Report Id: d3ac6a03-667a-4d61-ab36-d2ae703fc252 Faulting package full name: Faulting package-relative application ID: My runtime crashes from time to time. I'm not getting anything in the PLC logs. This is from the windows logs. Can anyone help me understand why this is happening?
Last updated: 2025-03-19

Post by ofey on two different OPC clients with different privileges ^{CODESYS Forge talk (Post)}
Hi! I have usually only connected one OPC client (our system) to an OPC server created in the codesys environment on a PLC. This OPC client has a lot of write privileges. A customer also want OPC access, but I want to restrict his access to only read certain values. Do you know if this is possible inside the single codesys runtime running on a controller?
Last updated: 2024-02-01

Post by plunje on Sensor not set ^{CODESYS Forge talk (Post)}
A got a larger project but this very small example makes it clear. I have a button, and after it's clicked a lamp should flip on and stays on, and when the mouse-button is released it should stay on. When I try that in the PLC_PRG it works, but when I change it to a function block (seet attched demo proj) it isn't. I'm fairly new to PLC programming but are very experienced C# engineer, but this goes above my head...
Last updated: 2024-05-26

Variables $placeholders$ in visualisations, like in v.2.x ? ^{CODESYS Forge talk (Thread)}
Variables $placeholders$ in visualisations, like in v.2.x ?
Last updated: 2021-05-06

Defining two variable in one rectangle box in Visualization ^{CODESYS Forge talk (Thread)}
Defining two variable in one rectangle box in Visualization
Last updated: 2017-04-22

Compilerdefines works in application properties but not in POU properties ^{CODESYS Forge talk (Thread)}
Compilerdefines works in application properties but not in POU properties
Last updated: 2021-12-30

Eingabe in die Visualisierung in ein Array ^{CODESYS Forge talk (Thread)}
Eingabe in die Visualisierung in ein Array
Last updated: 2014-06-27

Device related functions - in library or in Main Program ? ^{CODESYS Forge talk (Thread)}
Device related functions - in library or in Main Program ?
Last updated: 2012-08-20

Sort by relevance or date