Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Dear Tim, This is the missing link for me. I was not aware of the fact that the docker container is claiming the smallest possible license. Now the serial number makes much more sense. Thank you
Last updated: 2025-10-02

Post by ewi04 on SysDirRead - miss 1 file in the folder list research ^{CODESYS Forge talk (Post)}
Hello, I also had this problem. I was able to solve it with the CAA File library. Here the example page: https://content.helpme-codesys.com/en/libs/CAA%20File/Current/Examples.html
Last updated: 2023-12-13

Post by ewi04 on Recipe Manager - RecipeManCommands, load & write wrong values, Bug? ^{CODESYS Forge talk (Post)}
Nice to hear that I'm not the only one. I share your suffering. I was on the verge of doing the same.
Last updated: 2024-01-04

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hello Edwin, I sent the info through CODESYS store my question, as I was afraid that I could be exposing sensitive information here in the forum. Thank you very much!
Last updated: 2024-01-10

Post by theo on Forget liscence on raspberry ^{CODESYS Forge talk (Post)}
Hello everyone, I installed my liscence on my raspbery but I can't reactivate it after installing it on a new SD card because the old one was broken. I get an error message 10957.
Last updated: 2024-01-25

Post by victor on Trend-Trace / Time x-axis ^{CODESYS Forge talk (Post)}
Good morning, I am new to codesys, I am currently manipulating the Trace and Trend elements and I would like to know if it was possible to configure a variable or a trigger to reset the "X" axis to 0. have a good day.
Last updated: 2024-01-26

Post by yann2021 on SoftMotion: Error after generate code ^{CODESYS Forge talk (Post)}
Hello, I have a project who was working in a previous version of Codesys but if I open it now with Codesys 3.5 SP19 Patch2 I have errors after code generation. Who can me please help to solve these errors?
Last updated: 2024-01-30

Post by masmith1553 on C0564 Warning Message ^{CODESYS Forge talk (Post)}
Thank you for the reply. I was able to use this attribute in both of my Network Variable List Sends to clear the warnings.
Last updated: 2024-01-30

Post by ruben on DataSource not working ^{CODESYS Forge talk (Post)}
I had the same error. It took me a LONG way to figure it out, but in my case the problem was that I used LDATE_AND_TIME. It seems to be not supported, at least not in the Codesys version I used (3.5.16)
Last updated: 2024-02-01

Post by eschwellinger on CAN-Bus in Demo-Version ^{CODESYS Forge talk (Post)}
Eigentlich alles ok - sollte gehen - der MDBX wie ist der konfiguriert (also die PDO's) auf Änderung / zyklisch? Wenn du einen CAN Monitor hast, anschließen und schauen was genau auf dem BUS los ist. Also einen CAN Trace machen.
Last updated: 2024-02-09

Post by yannickasselin on json utilities not reading or writing files ^{CODESYS Forge talk (Post)}
Same problem here. I am pretty sure I was able to make it work a couple weeks ago but now I cannot make it work anymore. Always get FILE_OPEN_ERROR
Last updated: 2024-02-12

Post by arundara on Variable Sync Issue In Soft Plc Redundancy ^{CODESYS Forge talk (Post)}
i understood that we have to use sync variable function. when i used this i was able to achieve on the requirements of our project.
Last updated: 2024-02-13

Post by auto1254 on IIOT MQTT Subscription ^{CODESYS Forge talk (Post)}
hi, I had the same error, but after doing this I was unable to connect more than 50 subscriptions to the same client, is there any way to help?
Last updated: 2024-02-20

Post by dtamm on How to read string from CharBufferPtr? ^{CODESYS Forge talk (Post)}
Solved it! The simple answer was to declare a variable as POINTER TO STRING and assign the GetMessage result to that variable. Then, the ^ operator can be used to extract the message as string.
Last updated: 2024-02-21

Post by manuknecht on Creating softmotion axis dynamically ^{CODESYS Forge talk (Post)}
Hi I was wondering the same thing. I managed to dynamically add an EtherCat Slave but I could not find out how to add a softmotion axis to it. Does anyone have an answer to this? Thanks in advance!
Last updated: 2024-02-21

Post by john-robinson on Limiting Memory Access of an Array to Within its Bounds ^{CODESYS Forge talk (Post)}
Thanks Tim! This was exactly the functionality we were looking for. We are already using implicit checks to check for divide by 0 errors, we will add implicit checking for array bounds.
Last updated: 2024-03-06

Post by sumit on Not able to see input data coming from eip adapter on codesys ^{CODESYS Forge talk (Post)}
i-campbell, Thank you the suggestion, issue was the windows firewall not allowing the UDP traffic to pass through for EIP. thanks again
Last updated: 2024-03-07

Post by jaspergain on Application has invalid license metrics. ^{CODESYS Forge talk (Post)}
Hey did you update this project from an older version? I had an similair issue recently, and when I updated the Compiler Version in Project Settings the issue was resolved.
Last updated: 2024-04-10

Post by mbmik on IoDrvModbusTCP_Diag not defined when using MODBUS ^{CODESYS Forge talk (Post)}
Thanks alot for your time and help! I quickly tested the suggestion, as it makes a lot of sense. Unfortunately the erros still appear as before. The settings was already set before, and i tried turning it off.. no effect..
Last updated: 2024-04-16

Post by ekristoffe on 3.5.19.0 IDE forced "hide namespaces" on 3.5.16.40 project ^{CODESYS Forge talk (Post)}
Hello, I have the same problem, I used to enforce the usage of the namespace (which was really helpful). and now I can't even find the option (CS 3.5.19.20). Where in the option this setting used to be ? Thanks
Last updated: 2024-04-25

Post by rabaggett on CODESYS control for Raspberry Pi 64 SL errors ^{CODESYS Forge talk (Post)}
It is either my installation is bad, or there is a bug. I re-created the project in 3.5 SP19 and there are no errors or warnings. Compiles with no errors or warnings. The original was done in 3.5 SP20. Thoughts?
Last updated: 2024-05-03

Post by simonep on new version of CODESYS have problem to load GSDML files ^{CODESYS Forge talk (Post)}
I have update codesys today but now i can't install my GSDML files, until Friday I was always able to load without any problem, now it gives me this error. Codesys version V3.5 SP19 Patch 1 + (64 bit)
Last updated: 2024-05-20

Post by ahmed-abohelal on SysComRead Timeout Parameter ^{CODESYS Forge talk (Post)}
Hello I was facing the same problem i have to increase the timeout since the unit looks like to be in us SysComread(hCom:=hCom,pbyBuffer := ADR(readBuffer[0]),ulSize:=128,ulTimeout:=3000000,pResult:= ADR(readRes));
Last updated: 2025-10-22

Post by gcodejedi on The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. ^{CODESYS Forge talk (Post)}
Hello, I am experiencing this exact same issue. Were you able to get yours resolved? If so, would you mind sharing the solution you discovered? Thanks!
Last updated: 3 days ago

Post by cer-wa on Not able to connect multiple profinet encoder in codesys Linux ARM64 ^{CODESYS Forge talk (Post)}
Hello, currently im working with a RevPi connect 5 on a codesys project. Up until now I was having a blast because things were going really smooth but for like almost a day im kind of stuck on the integration of multiple profinet sensors into my project. This is kind of a bummer because that should be an easy thing to do. What I tried so far was to create and additional ethernet adapter where I then tried to connect my devices. in the beginning I tried to connect the devices directly which was not working because I could assign the IP-adress only to the ethernet adapter and not to the devices but the device was found in the device repository (this gets important in the second part) So what I tried next was to setup a PN-Controller and connect my devices subsequently to the Controller. Sadly now the devices wont show up in the device repository anymore. To me its not clear why this is happening. And the worst thing is: I went ahead and setup a device completely like I would want to have it in the project and when I then click on scan devices I can even find the device. But it can not be added to project for whatever reason eventhough im 100% certain that the gsdml file is the correct one. Can anyone help me with this. Like I said this seems like an easy thing to do and its taking me way longer than expected already. The only thing that came to my mind why this might not work is because I have codesys license which only allows one profinet instance. Could that be the case? The error message seems then pretty unfit but ok. I will be grateful for every advice. Thanks in advance! Best regards!
Last updated: 2025-09-25

Sort by relevance or date