Post by richard-wang on Codesys recipe manager - what does it do? ^{CODESYS Forge talk (Post)}
Hi All Thanks for sharing this information. For whom may not know why always get error code 16#4000 or 16#4002 while performing Recipe commands, the root cause is There is a line need to be inserted in CODESYSControl.cfg file, which is PlaceholderFilePath.1=/var/opt/codesys/PlcLogic/ I am using Pi, therefore the above path is set to my pi unit, after adding above line to my cfg file, all the Recipe commands work fine. But I still do not know how and when this file got modified though.
Last updated: 2024-04-29

Post by rabaggett on CODESYS control for Raspberry Pi 64 SL errors ^{CODESYS Forge talk (Post)}
Update: I started over. I saved progress at each step. all compiled zero errors, zero warnings. Pre-processor messages remain, but I can make progress. Until I try to re- load the project file in Codesys. Re-loaded files error as above when compiled, even though they compiled error-free immediately before saving. Is my installation borked? (Not easy to re-install due to IT madness...)
Last updated: 2024-05-03

Post by totorovic on Softmotion not working with simulation mode ^{CODESYS Forge talk (Post)}
Good morning, I think that the mode Simulation does not support the Softmotion functionnality because it runs the CODESYS process with normal priority wich is not a good thing for real-time behavior. If you want to test your PLC project, please use a Codesys Control Softmotion (and your computer must have the Ethercat driver installed) or much easier, download your code into the C6 Smart. BR
Last updated: 2024-05-13

Post by paro on send appliaction files to wago plc (codesys 3.5) via ssh ^{CODESYS Forge talk (Post)}
Hi, it is enough to copy the files to /home/codesys/PlcLogic/Application and adding the lines [CmpApp] Application.1=Application to the eRUNTIME.cfg, if your Application in your program is also called "Application". Reboot -> Bootapp should be loaded. If not please check the log /var/log/runtime.log There should be a line which explains why the bootproject is not loaded.
Last updated: 2024-05-29

Hi, I try to send and receive data using a UDP connection via SysSocket 3.5.17.0. While sending data works fine, I have problems with the receiving part. I am able to capture the received data of client side in wireshark But unable to capture it on the codesys ^{CODESYS Forge talk (Thread)}
Hi, I try to send and receive data using a UDP connection via SysSocket 3.5.17.0. While sending data works fine, I have problems with the receiving part. I am able to capture the received data of client side in wireshark But unable to capture it on the codesys
Last updated: 2024-06-03

Post by kris-samoy on Get Alarm status in Codesys ^{CODESYS Forge talk (Post)}
I am rather new to Codesys and I'm trying to figure out how to get the status of an alarm. This to interlock the start of a device until the alarm has been acknowledged... I am not sure if IAlarm.GetState (METH) can be used for this purpose. If yes then could someone please briefly explain how to use this? https://content.helpme-codesys.com/en/libs/AlarmManager/4.1.0.0/Interfaces/pou-IAlarm/GetState.html Thx & grtz, Kris
Last updated: 2024-06-03

Post by nelsonreis on Help with IFM EcomatController CR710S in Codesys ^{CODESYS Forge talk (Post)}
Hi, Recently I bought a CR710S controller from IFM. I installed Codesys V3.5 SP11 as recommended and all required packages (including the safety packages and the IOWrapper package). However, I can't even open the project template without getting errors related to libraries failing to load (below in the first print screen). Then, clicking ok appears only 2 errors (second print) and when trying to go to simulation and login I get another 2 different errors (third print). I really appreciate any help anyone can provide, I'm completely stuck on this right now.
Last updated: 2024-06-04

Post by bitwitch on Einheiten umrechnen, Numpad und Eingabegrenzen ^{CODESYS Forge talk (Post)}
Das Codesys-Objekt 'Einheiten umrechnen' wirkt auf timeVar (TIME) z.B. innerhalb eines Visu-Rechtecks und funktionier in den Grundfunktionen einwadfrei. Die Ausgabe der Std. von timeVar läuft. Beispiel: Bei t#3d2h10m wird wunschgemäß 74h (volle Std-Anzahl). Die Grenzüberwachung Max= 10 funktioniert nicht, da die Angabe scheinbar ms erwartet (arbeitet mit 10ms). Irgend wie muss man jetzt codesys davon überzeugen, dass auch für Min und Max die Einheitenumrechnerei wirken soll, wobei die Eingabe der Grenzen in Std erfolen muß. Hat jemad einen TiPPPPPPPPP?
Last updated: 2024-06-14

Post by nano on How to access to variable value through symbolic string name ^{CODESYS Forge talk (Post)}
i know, this is the reason for us either. PLC-Handler is to big, and only available with additional Contracts/Costs. OPC-UA is to slow for us. As described, there is a solution available, but im not allowed to post them here. i would prefer you send a message at codesys store by "have a question" or similar called. Not sure. Or, if an Codesys-Official Member allows to share that informations, i can give you the right hints.
Last updated: 2024-06-15

Post by sajid on NMEA Serial data read in Control win v3 x64 ^{CODESYS Forge talk (Post)}
I am using the SerialCom example program from the CODESYS website to read NMEA strings in CODESYS Control Win V3 x64 through a serial-to-USB converter. However, I occasionally receive only partial data or encounter errors in the received string. A screenshot of expected NMEA string attached for reference. Could you please advise on how to ensure the full NMEA string is received consistently? Error in strRead variable is <value of="" the="" expression="" cannot="" be="" retrieved=""></value>
Last updated: 2025-10-16

Post by sajid on NMEA Serial data read in Control win v3 x64 ^{CODESYS Forge talk (Post)}
I am using the SerialCom example program from the CODESYS website to read NMEA strings in CODESYS Control Win V3 x64 through a serial-to-USB converter. However, I occasionally receive only partial data or encounter errors in the received string. A screenshot of expected NMEA string attached for reference. Could you please advise on how to ensure the full NMEA string is received consistently? Error in strRead variable is <value of="" the="" expression="" cannot="" be="" retrieved=""></value>
Last updated: 2025-10-16

Post by mizi on SM_Drive_Virtual ^{CODESYS Forge talk (Post)}
Hi I recently started learning Codesys SoftMotion. At first, I mainly used YouTube videos. I stopped at two videos where the same problem keeps recurring. fbReadPos( Axis := X_Axis, Enable := TRUE, Position => gAxes.lrActualPos); <- axis cannot move I checked the entire code line by line. Zero errors. GPT spits out nonsense, throwing up increasingly worse errors. And when I copy its code, it says the code is wrong and gets stuck in a loop of its own stupidity. Can anyone explain why it doesn't work? Link to the video below: https://www.youtube.com/watch?v=CYa2HvYZgbM&list=PLsEhEcYjG7na0OveU7cqFXBx7ATyGGn0A&index=3
Last updated: 2025-10-21

Post by gatewail0 on Digital Clock ^{CODESYS Forge talk (Post)}
You can definitely pull the actual system time into CODESYS without too much trouble. Take a look at the SysTimeRtc or SysTime library—both let you read the current date and time from the Raspberry Pi. You can call SysTimeRtcGet() or SysTimeGetTime() in your PLC code and then format the hours, minutes, and seconds into variables that feed your 7-segment visualization. Once you’ve mapped those values, your Visu display will update automatically each cycle. It’s a pretty common approach for clocks in CODESYS, so you should be able to get it working quickly. golf hit
Last updated: 2025-12-04

Post by marciohogenelst on stablish CAN communication through the PC's USB port ^{CODESYS Forge talk (Post)}
I'm using Codesys v3.21SP4 on my PC via ControlWin to establish CAN communication through the PC's USB port. The software works fine. The CAN/USB converter works fine and is validated. However, there is no communication. Which folder and file should be modified to allow the CAN/USB converter to work and thus achieve the connection? Converter used: PCAN-View Information not yet processed: Access the folder: C:\Program Files (x86)\3S CODESYS\GatewayPLC\CODESYSControl.cfg Uncomment the line: Component.5=CmpPCANBasicDrv Any help would be appreciated.
Last updated: 2025-12-11

Post by marciohogenelst on stablish CAN communication through the PC's USB port ^{CODESYS Forge talk (Post)}
I'm using Codesys v3.21SP4 on my PC via ControlWin to establish CAN communication through the PC's USB port. The software works fine. The CAN/USB converter works fine and is validated. However, there is no communication. Which folder and file should be modified to allow the CAN/USB converter to work and thus achieve the connection? Converter used: PCAN-View Information not yet processed: Access the folder: C:\Program Files (x86)\3S CODESYS\GatewayPLC\CODESYSControl.cfg Uncomment the line: Component.5=CmpPCANBasicDrv Any help would be appreciated.
Last updated: 2025-12-11

Post by ryusoup on 'keep last value' option in CODESYS EtherCAT ^{CODESYS Forge talk (Post)}
Hello, I’m using CODESYS EtherCAT Master on a Raspberry Pi controller with several remote I/O modules. I’m facing an issue where the input values from the remote I/Os drop to 0 when a connection error occurs. Is there a way to configure a “keep last value” behavior (i.e., hold the last valid input) instead of defaulting to 0 on communication loss? Best regards,
Last updated: 2025-11-18

Post by farren on Codesys complains about matching versions ^{CODESYS Forge talk (Post)}
I'm building up a 2nd PC to match an existing developer PC. Installed the same SP and Patch levels but when I open a project that was created on the existing PC, Codesys complains that it's not the same version. Attaching a screenshot..... What else is there to match? Also, can all of the libraries that are on the existing machine be copied from it to the new machine and if so, how? (So I get the same versions) Which files/folders do I copy? Thanks! -Farren
Last updated: 2025-12-14

Post by jinlee on Dynamic I/Os Mapping ^{CODESYS Forge talk (Post)}
Hi there, I will give it a try. Thank you very much.
Last updated: 2023-08-19

Post by vincentger on Raspberry Pi Control SL MC - Restoring License not working anymore! ^{CODESYS Forge talk (Post)}
Running into the same problem restoring a Runtime 4.4.0.0 device on a now 4.8.0.0 device.
Last updated: 2023-08-21

Post by kreisfilho on Same program to more than one PLC ^{CODESYS Forge talk (Post)}
Hi, How can I assign a monitor (non touch) connected to a Raspberry pi (via HDMI) as visualization output?
Last updated: 2023-08-23

How to call the same program from library and get the vars updated. ^{CODESYS Forge talk (Thread)}
How to call the same program from library and get the vars updated.
Last updated: 2023-08-23

Post by smercante on Unable to Import PLC Open XML from Easy Remote IO ^{CODESYS Forge talk (Post)}
Hello dear. I have the same problem. Could you solve it? Do you use GLV variables?
Last updated: 2023-08-24

Post by i-campbell on Ping By Name ^{CODESYS Forge talk (Post)}
https://content.helpme-codesys.com/en/libs/Net%20Base%20Services/3.5.19.20/NetBaseServices/Function-Blocks/IP/fld-IP.html resolve hostname and ping?
Last updated: 2023-08-24

Post by jegerjon on Same program to more than one PLC ^{CODESYS Forge talk (Post)}
I guess you could archive the project, open the archive and go online. Is that suffiecient for your use case?
Last updated: 2023-08-25

Post by i-campbell on Ping By Name ^{CODESYS Forge talk (Post)}
What library is that? Net Base Services Is there a version 9.2 ? I've not heard of a version 9.2
Last updated: 2023-08-25

Sort by relevance or date