Post by mtorell on Safe Editor in codesys v3.5sp21p30 ^{CODESYS Forge talk (Post)}
How do I negate an output signal from an OR gate. I have tried right click to no avail and I cannot find an propriate NEGATE box? I want to save the output from the block to an inverted variable.
Last updated: 2026-03-12

Post by mjam04 on AM243 LaunchPad as PROFINET Device with CODESYS – RPC Aborted error when scanning devices ^{CODESYS Forge talk (Post)}
Hello, I am currently trying to use the AM243 LaunchPad as a PROFINET device and connect to it using CODESYS. In my setup I am also using a Raspberry Pi running the CODESYS PROFINET Runtime, which acts as the PROFINET controller. The setup of the Profinet controller is correct, so all devices are in the same subnet. However, I encounter an issue when scanning for PROFINET devices in CODESYS. The AM243 LaunchPad appears in the scan results, but the following error is reported: RPC Aborted: 0x16C9A049 Additionally, CODESYS shows the message that the identification data is not available and the IP address should be checked. Because of this error, the controller cannot establish a connection to the device. Another observation is that I cannot ping the AM243 LaunchPad from my PC, even though I configured what should be the correct IP address. Setup: PROFINET Device: AM243 LaunchPad PROFINET Stack: Industrial Communication SDK example PROFINET Controller: Raspberry Pi running CODESYS with PROFINET Runtime Engineering PC: CODESYS IDE Network: Ethernet connection between PC, Raspberry Pi, and AM243 In the attachments there is a screenshot of the corresponding error. Did anybody had the same error? Any hints or debugging suggestions would be greatly appreciated. Thank you!
Last updated: 2026-03-13

Post by hannibal on Codesys Trend - setting Y axis minimum and maximum as variables - error ^{CODESYS Forge talk (Post)}
Hi, It was my fault. I was using a REAL variable instead of INTEGER. Sorry for posting this.
Last updated: 2026-03-22

Post by gseidel on Smooth path is not working with SMC_NCInterpreter ^{CODESYS Forge talk (Post)}
Hi tommyk-mar, do you call SMC_SmoothPath after SMC_NCIntepreter? Both G51 in the G-Code and the function block call are needed. You can see how this can be done in this example: https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_example_cnc_3.html Best regarsd, Georg
Last updated: 2026-03-27

Post by nulltrace on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Hey Husarz. i don't forget you, the Thing is, to give you my answer, i have to wait for Answer from Codesys/E. Schwellinger. i suspect Mr. Schwellinger is on in Vacations that week. so please, be patient at moment
Last updated: 2026-04-10

Post by reinier-geers on Draw nails pattern ^{CODESYS Forge talk (Post)}
Hi I want to draw a nailpattern. But codesys Hasnt a draw command. And i dont want to draw 1000 nails and move them in position. Any one an idee ?
Last updated: 2026-04-20

Post by timvh on Alarmmanagement – Dynamic Alarm List ^{CODESYS Forge talk (Post)}
Probably best to create an alarm template for your motor function block. Then automatically the alarm manager can be filled with all the alarms for all instances of the motor function blocks (based on the created alarm template). See: https://content.helpme-codesys.com/en/CODESYS%20Visualization/_cds_obj_alarm_group_template.html
Last updated: 2026-04-25

Post by osande on V3.5 SP22 Patch1 ^{CODESYS Forge talk (Post)}
... and SP21 P6 also. Kind of bummer, migrating from TIA Portal to Codesys for PLC educational courses. These kind of bugs, and other deficiencies, really makes me regret my choice.
Last updated: 2026-05-06

Post by kiranbsiddaiah on CodeSys OPC UA client Unable to Connect To OPC UA sever through Username and password ^{CODESYS Forge talk (Post)}
And also we do not have any opc ua related license . Do we need to have a opc ua license to communicate with OPC UA server with username and password?
Last updated: 2026-05-07

Post by saml on Eaton HFX Controllers ^{CODESYS Forge talk (Post)}
Hellow every one. DPguy could do you share how you resolved the issues? what Codesys version did you used to fix it? thank a lot!!!
Last updated: 2026-05-26

Post by saml on Eaton HFX Controllers ^{CODESYS Forge talk (Post)}
Hellow every one. DPguy could do you share how you resolved the issues? what Codesys version did you used to fix it? thank a lot!!!
Last updated: 2026-05-26

Post by cm1435 on too much data for the controller ^{CODESYS Forge talk (Post)}
When I download project to ifm CR2530 controller, met the error "too much data for the controller". Actually my project is just 70k Bytes, far from the memory 1M of CR2530. Anybony ever met this problem?
Last updated: 2026-05-30

Post by jeffyech on <Dereference of invalid pointer> ^{CODESYS Forge talk (Post)}
I have a program which calls a structure. while online with the PLC, I get: <dereference of="" invalid="" pointer=""> in the declaration values area. What are the causes of this? Can it be solved?</dereference> Version 3.5 of codesys.
Last updated: 2026-06-25

Post by eschwellinger on CODESYS Control for Raspberry Pi 5 - "Hardware version or firmware version not supported" on Rev 1.1, persists across multiple runtime versions and OS images ^{CODESYS Forge talk (Post)}
see here: https://www.codesys.com/eco-system/up-to-date/release-lifecycle/release-plan-roadmap/ 18.8
Last updated: 2026-08-11

Post by eschwellinger on Codesys Virtual Safe Control startet nicht (mehr) ^{CODESYS Forge talk (Post)}
..kannst du mal ins log auf dem Zielsystem schauen? VirtualControlAPI.log Danach könnte man den Start mal auf der Kommandozeile ausprobieren: python3 VirtualControlAPI.py -r <name></name> am besten noch mit verbose: "--verbose"
Last updated: 2026-09-02

Post by mariussandu on OPC-UA ^{CODESYS Forge talk (Post)}
I updated the runtime to CODESYS Control for Raspberry Pi SL 4.22.0.0, SDK 3.5.22.30. Same outcome as before. Now I study if migrating to PFC100 is ok or to change to Siemens PLC because of this issue.
Last updated: 2026-09-07

Post by mariussandu on OPC-UA ^{CODESYS Forge talk (Post)}
I updated the runtime to CODESYS Control for Raspberry Pi SL 4.22.0.0, SDK 3.5.22.30. Same outcome as before. Now I study if migrating to PFC100 is ok or to change to Siemens PLC because of this issue.
Last updated: 2026-09-07

Post by hluecke on Codesys Virtual Safe Control startet nicht (mehr) ^{CODESYS Forge talk (Post)}
Da war keine Log Datei vorhanden. Nachdem ich die IP-Adresse für den Lizenzserver aus der SafeControl-Instanz entfernt habe, startet die Instanz wieder.
Last updated: 2026-09-08

Post by dim54 on Disabling automatic logout from the owner user ^{CODESYS Forge talk (Post)}
Hello! Please tell me how I can disable the automatic logout as the Owner user (CODESYS 3.5 SP15 Path 2). I have to reconnect multiple times during the workday. Thanks!
Last updated: 2026-01-16

Post by wollvieh on Sysfile Konfiguration ^{CODESYS Forge talk (Post)}
Hallo, nach Umstellung auf Raspberry Trixie sowie neueste CODESYS Version funktioniert das Schreiben Lesen mit Sysfile Bei mir nicht mehr. Zugriff bei Fileopen wird abgelehnt. Gibt es irgendwo eine Dokumentation, welche Einträge für Sysfile in der Datei CODESYSControl.cfg vorzunehmen sind? In Ratlosigkeit...
Last updated: 2026-01-19

Post by wollvieh on Sysfile Konfiguration ^{CODESYS Forge talk (Post)}
Hallo, nach Umstellung auf Raspberry Trixie sowie neueste CODESYS Version funktioniert das Schreiben Lesen mit Sysfile Bei mir nicht mehr. Zugriff bei Fileopen wird abgelehnt. Gibt es irgendwo eine Dokumentation, welche Einträge für Sysfile in der Datei CODESYSControl.cfg vorzunehmen sind? In Ratlosigkeit...
Last updated: 2026-01-19

Post by wollvieh on Sysfile Konfiguration ^{CODESYS Forge talk (Post)}
Hallo, nach Umstellung auf Raspberry Trixie sowie neueste CODESYS Version funktioniert das Schreiben Lesen mit Sysfile Bei mir nicht mehr. Zugriff bei Fileopen wird abgelehnt. Gibt es irgendwo eine Dokumentation, welche Einträge für Sysfile in der Datei CODESYSControl.cfg vorzunehmen sind? In Ratlosigkeit...
Last updated: 2026-01-19

Post by wollvieh on (no subject) ^{CODESYS Forge talk (Post)}
Hallo, nach Umstellung auf Raspberry Trixie sowie neueste CODESYS Version funktioniert das Schreiben Lesen mit Sysfile Bei mir nicht mehr. Zugriff bei Fileopen wird abgelehnt. Gibt es irgendwo eine Dokumentation, welche Einträge für Sysfile in der Datei CODESYSControl.cfg vorzunehmen sind? In Ratlosigkeit...
Last updated: 2026-01-19

Post by wollvieh on Sysfile Konfiguration ^{CODESYS Forge talk (Post)}
Hallo, nach Umstellung auf Raspberry Trixie sowie neueste CODESYS Version funktioniert das Schreiben Lesen mit Sysfile Bei mir nicht mehr. Zugriff bei Fileopen wird abgelehnt. Gibt es irgendwo eine Dokumentation, welche Einträge für Sysfile in der Datei CODESYSControl.cfg vorzunehmen sind? In Ratlosigkeit...
Last updated: 2026-01-19

Post by wollvieh on Sysfile Konfiguration ^{CODESYS Forge talk (Post)}
Hallo, nach Umstellung auf Raspberry Trixie sowie neueste CODESYS Version funktioniert das Schreiben Lesen mit Sysfile Bei mir nicht mehr. Zugriff bei Fileopen wird abgelehnt. Gibt es irgendwo eine Dokumentation, welche Einträge für Sysfile in der Datei CODESYSControl.cfg vorzunehmen sind? In Ratlosigkeit...
Last updated: 2026-01-19

Sort by relevance or date