Post by smic on Virtual Control SL Profinet connection ^{CODESYS Forge talk (Post)}
I found the solution. The NIC information on Deploy control SL should be defined to scan profinet devices. So I moved to the next challenge. Device is founded but still it has orange mark not green.
Last updated: 2025-02-28

Post by eschwellinger on Virtual Control SL Profinet connection ^{CODESYS Forge talk (Post)}
means not licensed demo mode.. use the Licenserver on the host and apply a license and add the Ip of the license server then it will be green.
Last updated: 2025-02-28

Post by domebruce on Which database to use? ^{CODESYS Forge talk (Post)}
I'm new on Codesys. I need to manage a large and complex data set, which database and library you suggest to use? Some application examples will be appriciated. Thanks
Last updated: 2025-03-04

Post by fil on Using Latch Variable in Alarm as input from text list ^{CODESYS Forge talk (Post)}
Good morning, I am currently working on a project where this would be of enormous value. Any input would be very welcome - thanks in advance. Best regards Fil
Last updated: 2025-03-06

Post by timvh on SysProcessCreate2 on Linux runtime ^{CODESYS Forge talk (Post)}
Maybe it is better to use the functionality of the Extension Package: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_extension.html https://content.helpme-codesys.com/en/CODESYS%20Examples/_ex_extension_package.html
Last updated: 2025-03-17

Post by warrumungi on MySQL problem with connection ^{CODESYS Forge talk (Post)}
5 years later: I'm also having the exact same problem! MySQL Workbench works fine across the LAN, but the codesys library cannot get past this stage... The library authors are not responding on their support email :(
Last updated: 2025-03-27

Post by reinier-geers on Sel Error on an adressed output 3.5.20.5 ^{CODESYS Forge talk (Post)}
if i do : sVisu_Uitwerp := SEL( qxUitwerp_Ventiel ,'Cil_H_Uit' ,'Cil_H_In' ); then i get see picture Why ? It works normaly but not in 20.5
Last updated: 2025-03-27

Post by dat422 on OPC UA Method - How to wait for result? ^{CODESYS Forge talk (Post)}
Hi, I am also interested to know on how to use the Codesys OPCUA Client to call methods from e.g. a python opcua server.
Last updated: 2025-03-28

Post by vincerex on SFTP access ^{CODESYS Forge talk (Post)}
hello everyone, is there a library or a way to access to SFTP server using Codesys? SysSocket library is only suitable for FTP it seems. I didn't find any other suggestion on the web Thanks for your help VinceReX
Last updated: 2025-04-01

Post by diegoramonm on Codesys Codebase Library Update ^{CODESYS Forge talk (Post)}
Today I update de codebase library on codesys after that 32 erros are showm after build, those erros are related to CIP Object Library and VisuDialog
Last updated: 2025-04-01

Post by diegoramonm on Codesys Codebase Library Update ^{CODESYS Forge talk (Post)}
Today I update de codebase library on codesys after that 32 erros are showm after build, those erros are related to CIP Object Library and VisuDialog
Last updated: 2025-04-01

Post by r-c-r on SM3RaspiStepper 0.0.0.6 issue ^{CODESYS Forge talk (Post)}
Ok, so i made some tests in the meantime and i have some conclusions. It apears that the enable bit is activated only when a motion function is executed. I implemented a very simple program with MC_Power and MC_Jog. If i enable everything on MC_Power, the enable GPIO pin stays off. However, as soon as the MC_Jog function is used the enable GPIO pin turns ON and remains ON. In version 0.0.0.4 this is not happening. The GPIO enable pin turns on or off when the MC_Power is enabled or disabled. From this behaviour i understand that in version 0.0.0.6 the GPIO enable bit is activated together with pulse and dir pins when motion starts. When motion stops, enable bit remains with the last state (on in this case) and you cannot turn it off for example. For me this bit is useful because i can turn on and off the stepper drive with MC_Power function. Now i can turn it on, but never off.
Last updated: 2025-04-04

Post by suyash on Version management ^{CODESYS Forge talk (Post)}
Hello all! My lack of experience on CodeSys IDE is landing me into problems. Everytime I download the latest version of the IDE, I get several errors due to libraries not matching. How do I manage my projects henceforth? BR, Suyash
Last updated: 2025-04-09

Post by suyash on Version management ^{CODESYS Forge talk (Post)}
Hello all! My lack of experience on CodeSys IDE is landing me into problems. Everytime I download the latest version of the IDE, I get several errors due to libraries not matching. How do I manage my projects henceforth? BR, Suyash
Last updated: 2025-04-09

Post by glutenaron on Safety drive EL6900 and mitsubishi ^{CODESYS Forge talk (Post)}
I can mention that i needed to update the firmware on the mitsubishi servo and then i got a step closer. The old firmware did not support FSOE but the new does.
Last updated: 2025-05-20

Post by glutenaron on Safety drive EL6900 and mitsubishi ^{CODESYS Forge talk (Post)}
I can mention that i needed to update the firmware on the mitsubishi servo and then i got a step closer. The old firmware did not support FSOE but the new does.
Last updated: 2025-05-20

Post by mondinmr on CIFX 50E-DP on Linux. ^{CODESYS Forge talk (Post)}
We need to use two CIFX 50E-DP cards in two Linux PCs running CODESYS for Linux SL (the machines are x86). Has anyone experienced any issues? Do these cards work reliably under Linux?
Last updated: 2025-05-23

Post by ph0010421 on Codesys running in Docker on Linux OS ^{CODESYS Forge talk (Post)}
Hello I need to make the Linux serial ports (ttymcx0, 1, 2 and 3) available to Codesys (Com1, 2...) Is there a guide? Is it something I do when I deploy the Codesys SL? thanks
Last updated: 2025-06-09

Post by s1mon on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
Thx for the hint. It works if I add following line to the .cfg file. PlaceholderFilePath.2=/sys/devices/w1_bus_master2, $OneWire2$ Is there a documentation how to modify this config file? Will this be overwritten if I do an update of the CodesysControl Runtime?
Last updated: 2025-06-13

Post by eschwellinger on Deploying to raspberry pi 5 hangs ^{CODESYS Forge talk (Post)}
..just use 'putty' ssh client on the virtual machine to login for a test to the pi. if this work it should work in CODESYS too.
Last updated: 2025-06-23

Post by davidbo on Why does SysTimeRtcSet not set the clock on a Pi 4 ^{CODESYS Forge talk (Post)}
temp:=DT_TO_DWORD(newTD); result:=SysTimeRtcSet(ulTimestamp:=DWORD_TO_WORD(temp)); the result=0 which mean ok but the clock is not set
Last updated: 2025-06-27

Post by mg0815 on Error, visualisation property handling, VISU_USEPROPERTYINFO ^{CODESYS Forge talk (Post)}
3.5.19.7 THANK YOU, 1000 times !!!! in german: Projekt/Projekteinstellungen/Visualisierung/Sichtbar - CLICK Danach * "Eigenschaften-Behandlung in allen Elementeigenschaften aktivieren" CLICK OFF - OK * "Eigenschaften-Behandlung in allen Elementeigenschaften aktivieren" CLICK ON - OK Danach sollte es gehen.
Last updated: 2025-06-27

Post by westcountryewe on Displaying a Target Web Page on WebVisu ^{CODESYS Forge talk (Post)}
I have a main PLC with my CODESYS project on, including Web Visu. I also have a second device used for pump monitoring, all of this is displayed on a seperate HMI. I am looking at displaying the pump monitoring HMI on WebVisu so that I can solely use 1 HMI rather than having two. I can project the pump monitoring HMI into Chrome, and log in and it works fine. When I'm using the Web Browser element in Web Visu, enter my URL (device IP) it shows me the web page, but doesn't show me all of it. It uses parts of JavaScript for the login authenticiation and various other widgets. Similarly, I cannot get Youtube or Google to display on WebVisu either (possibily because of the same reason). Does anybody have any tips on how I can display the likes of Youtube or Google onto WebVisu so I can view it on my 7inch HMI (I suspect that if I can get Youtube or Google to work, then I will also be able to get my pump montitoring web page to work too).
Last updated: 2025-07-09

Post by erictur on CODESYS Control for Linux ARM SL (32 bit) on Moxa UC-3100 IPC ^{CODESYS Forge talk (Post)}
UC3100 comes with Arm Cortex-A8 1 GHz and belongs to Moxa Industrial Linux 1 (Debian 9) for Arm-based Computers. I tried to install the CODESYS Control for Linux ARM SL (32 bit) on Moxa UC-3100 IPC. Unfortunately, the Third-party requirements: - libc >= 2.27 (required by CodeMeter Runtime) of the CODESYS Control for Linux ARM SL cannot be met on the Debian 9, which comes with glibc 2.24. I read the post by @johnlee (Getting Start with Codesys Control for Linux SL) (https://forge.codesys.com/forge/talk/Runtime/thread/0a515ced3f/). Where he discusses installation of CODESYS Control for Linux ARM SL on Debian 9. There was CODESYS Linux runtime v3.5.14 availble and it was successfully intalled on the Debian 9. However, the CODESYS Store has the oldest version V4.1.0.0 32 bit available. There is no way to find the CODESYS Linux runtime v3.5.14. So is there any work around for this? Or I cannot install the CODESYS Runtime on any of the Moxa IPCs based on the Moxa Industrial Linux 1 (Debian 9)?
Last updated: 2025-07-10

Post by paulpotat on Working on exporting/importing projects to PlainText. ^{CODESYS Forge talk (Post)}
Hello, Sorry for digging this topic up, but the bitbucket link does not work anymore. Have you changed the location @mondinmr ? I would be really interested in your project, even if you did not finish it. Thank you for your time, BR
Last updated: 2025-07-22

Sort by relevance or date