Establishing TLS Connection with MQTT Broker using MQTT Client SL Package ^{CODESYS Forge talk (Thread)}
Establishing TLS Connection with MQTT Broker using MQTT Client SL Package
Last updated: 2024-06-20

Post by kuegerls on SysProcessExecuteCommand2 and CANopen Device ^{CODESYS Forge talk (Post)}
I am now executing the process in a separate task with lower priority, but unfortunately, the connection to the master is still interrupted.
Last updated: 2024-06-21

Post by eschwellinger on Codesyscontrol.service stoppt nach 30s ^{CODESYS Forge talk (Post)}
...du könntest Arm SL verwenden, falls es keine anderen Hardware Abhängigkeiten gibt.
Last updated: 2024-06-21

Post by kthomas on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
I have been struggling for over a week to program my rapspberry pi 4 with codesys. I purchased the license. I installed the runtime and the gateway, and I can see the pi in the communication settings. But cannot log in. I have checked the status of the pi with sudo systemctl status codesyscontrol and it is running. I have enabled traffic to and from the pi with iptables and checked the logs and all looks good. I just cannot connect through the codesys ide. Can anyone help me before I lose my mind?
Last updated: 2024-06-22

Post by kthomas on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
I have been struggling for over a week to program my rapspberry pi 4 with codesys. I purchased the license. I installed the runtime and the gateway, and I can see the pi in the communication settings. But cannot log in. I have checked the status of the pi with sudo systemctl status codesyscontrol and it is running. I have enabled traffic to and from the pi with iptables and checked the logs and all looks good. I just cannot connect through the codesys ide. Can anyone help me before I lose my mind?
Last updated: 2024-06-22

Post by nano on variables between two applications ^{CODESYS Forge talk (Post)}
use an gvl for interact variables beetween apps and threads. this should work
Last updated: 2024-06-23

Post by tayhim on 3.5 P20 hangs - no response ^{CODESYS Forge talk (Post)}
I'm facing the same problem with SP 20 (win 11). is there any solution ?
Last updated: 2024-06-24

Post by rafael on Wbm/runtime and visualization login ^{CODESYS Forge talk (Post)}
Solved, there is a configuration inside the WBM where I can disable this login option (config>ports config)
Last updated: 2024-06-25

Post by mos89p on Alarm manager usage with Remote Alarm ^{CODESYS Forge talk (Post)}
Hello is it possible to filter the alarm from Alarm manager with remote alarms ?
Last updated: 2024-06-26

Post by eildp on Adding a Softmotion License to a Weintek HMI ^{CODESYS Forge talk (Post)}
I am here with the same question wondering if you found an answer. Anyone? Thanks!
Last updated: 2025-10-16

Post by eschwellinger on Adding a Softmotion License to a Weintek HMI ^{CODESYS Forge talk (Post)}
You need to ask Weintek if they support the licensing. For Softmotion the device should be realtime capable.
Last updated: 2025-10-17

Post by ranadheer on Control Win SL licensing ^{CODESYS Forge talk (Post)}
Hi johnlee and jeffgamsby Is Control win SL is a SoftPLc Extension SL
Last updated: 2025-10-18

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
hm.. could you add the project or at least parts of it?
Last updated: 2025-10-20

Post by jasperclauwaert on Persistent Retain Variables Not Visible in Online View (WAGO PFC100 + CODESYS) ^{CODESYS Forge talk (Post)}
Hi everyone, I’m working on a WAGO PFC100 with CODESYS. During development everything worked fine, but in the final stage I set several variables to PERSISTENT RETAIN. When I go online, most of these persistent variables cannot be monitored. Instead, I see: <Value of the expression cannot be retrieved> Interestingly, a few variables do show their values correctly, but the majority do not. The variables are not used as pointers or in any unusual way. The application compiles and runs without errors. Has anyone experienced this before? Is this a known issue with PFC100 or CODESYS? Any ideas on what could cause this behavior? Thanks in advance! Jasper
Last updated: 2025-10-23

Any ways to prevent Infinite scroll when moving an object to the left or top edge? ^{CODESYS Forge talk (Thread)}
Any ways to prevent Infinite scroll when moving an object to the left or top edge?
Last updated: 2025-10-24

OSCAT Scale_r function not working in LD 4.60 works in LAD2 on 3.5.21sp3 ^{CODESYS Forge talk (Thread)}
OSCAT Scale_r function not working in LD 4.60 works in LAD2 on 3.5.21sp3
Last updated: 2025-10-23

Post by jasperclauwaert on Persistent Retain Variables Not Visible in Online View (WAGO PFC100 + CODESYS) ^{CODESYS Forge talk (Post)}
Hi everyone, I’m working on a WAGO PFC100 with CODESYS. During development everything worked fine, but in the final stage I set several variables to PERSISTENT RETAIN. When I go online, most of these persistent variables cannot be monitored. Instead, I see: <Value of the expression cannot be retrieved> Interestingly, a few variables do show their values correctly, but the majority do not. The variables are not used as pointers or in any unusual way. The application compiles and runs without errors. Has anyone experienced this before? Is this a known issue with PFC100 or CODESYS? Any ideas on what could cause this behavior? Thanks in advance! Jasper
Last updated: 2025-10-23

Post by ph0010421 on OSCAT Scale_r function not working in LD 4.60 works in LAD2 on 3.5.21sp3 ^{CODESYS Forge talk (Post)}
Is that rung definitely being executed? Is the POU called?
Last updated: 2025-10-23

Post by shaunvdm on OSCAT Scale_r function not working in LD 4.60 works in LAD2 on 3.5.21sp3 ^{CODESYS Forge talk (Post)}
Yes it is called
Last updated: 2025-10-24

Post by vtec35 on search runtime 4.9.0.0 for pi 3 ^{CODESYS Forge talk (Post)}
i m not familiar with installation/firmware/version/runtime, juste the machine worked fine before, and now kaput lol
Last updated: 2025-10-26

Passing EtheNetIP adapter device into a Function Block to access it's IO ^{CODESYS Forge talk (Thread)}
Passing EtheNetIP adapter device into a Function Block to access it's IO
Last updated: 2025-10-28

Passing EtheNetIP adapter device into a Function Block to access it's IO ^{CODESYS Forge talk (Thread)}
Passing EtheNetIP adapter device into a Function Block to access it's IO
Last updated: 2025-10-28

Passing EtheNetIP adapter device into a Function Block to access it's IO ^{CODESYS Forge talk (Thread)}
Passing EtheNetIP adapter device into a Function Block to access it's IO
Last updated: 2025-10-28

Post by malte on OPC UA multiple Endpoints ^{CODESYS Forge talk (Post)}
My CODESYS OPC UA server provides endpoints using both the hostname and the IP address. Connecting via the IP address works fine, but connecting via the hostname does not. The endpoint list shows both opc.tcp://<hostname>:4840 and opc.tcp://<ip>:4840. When using the hostname, the OPC UA client (UA Expert) fails to connect. Using the IP address connects without issues. Main goal is to conect via Python but opcua-asyncio seems to prefer the hostname. How can I configure CODESYS or my system so that the OPC UA connection via hostname also works properly or disable it completly? Running Codesys for PFC200 sl 4.18.0.0
Last updated: 2025-10-28

Post by aria13 on Has anyone fed ESP32 sensor data into CODESYS (via MQTT/Modbus)? ^{CODESYS Forge talk (Post)}
Has anyone tried sending live sensor data from an ESP32 into a CODESYS runtime (for example via MQTT gateway or a Modbus bridge) to trigger PLC logic? I was reading an ESP32 → MQTT tutorial (https://www.theengineeringprojects.com/2021/11/esp32-mqtt.html) that shows how easy it is to publish sensor data from an ESP32, and I’m wondering how practical that is when tying the stream into industrial control software like CODESYS. I’ve also seen Arduino forum threads where people relay sensor streams to MQTT brokers and Raspberry Pi projects that bridge MQTT→Modbus, so I’m mainly curious about real-world issues: reliability, message latency, and simple patterns you’d recommend for safe PLC integration. Any tips, examples, or gotchas from folks who’ve done this?
Last updated: 2025-10-29

Sort by relevance or date