Post by manuknecht on High Cycle Times for SoftMotion_PlanningTask when using AxisGroup ^{CODESYS Forge talk (Post)}
Hi, thanks a lot for the response. I did check all these parameters, but if the PlanningTask takes up to 60 ms, I can't increase the Buffer to such values. I contacted the Codesys support with a projectarchive. Let's see if they can help. Thanks again for your great support!
Last updated: 2024-03-22

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi everybody We are currently working on a project with an RS232 serial COM interface and using the CAA SerialCOM library. We have it working fine reading and writing data, although we have found an issue we cannot resolve and any suggestions would be helpful. We have noticed that after a while the RS232 stops working. We have tracked this down to the HANDLE hCom keeps increasing and when this reaches 1023 the COM returns an unknown error "5003". Is there a way to reset this hCom reference? Thanks Richard
Last updated: 2024-03-22

Post by timvh on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
You should only open de COM port once and then leave it open. This hCom should not keep on incrementing. (off course when you are done communicating, you need to close the COM port)
Last updated: 2024-03-22

Post by phoward131 on Text List Fallback Value ^{CODESYS Forge talk (Post)}
I am relatively new to Codesys and I'm trying to develop an HMI that displays what mode a particular device is in based on an integer value. I am currently using dynamic texts with a text list which works fine but I am looking for a way to display a particular string (ie 'Unknown') when the index doesn't match any of of the indices in the text list. I can enter 'Unknown' in the text property of the text field element which works as expected but it displays the single quotes on the visualization. How can I escape these quotes to simply display the word Unknown? Thanks!
Last updated: 2024-03-22

Post by wollvieh on Raspi Pi Bullseye Webvisu Autostart ^{CODESYS Forge talk (Post)}
Anbei meine Lösung zum Autostart der Webvisu, vllt. hilft es jemandem... =============================== Raspberry Pi Bullseye 11 Autostart Codesys Webvisu im Kiosk Mode 1)Datei erstellen: sudo nano/etc/xdg/autostart/Visustart.desktop 2)Inhalt der Datei: [Desktop Entry] Type=Application Name=Visustart Exec=bash -c "sleep 30 && /home/pi/Desktop/Visu" 3)Visu Datei erstellen sudo nano /home/pi/Desktop/Visu 4) Inhalt der Datei: #!/bin/sh xset -dpms xset s off xset s noblank matchbox-window-manager -use_titlebar no & unclutter & chromium-browser -display=:0 --kiosk --incognito --window-positon=0,0 5) Datei ausführbar machen sudo chmod+x /home/pi/Desktop/Visu ... nach Neustart Raspi startet die Codesys Webvisu automatisch im Kiosk Mode ===============================
Last updated: 2024-03-24

Post by struccc on Release SP20 - Changes in behaviour? ^{CODESYS Forge talk (Post)}
Dear all, I've just started to migrate some of my ancient projects to SP20. There is one strange error (?) I have noticed so far. In a method call, depending on the circumstances I would like to return reference to an object, or an invalid reference: METHOD Add_EVT_OUT : REFERENCE TO FB_MSG VAR END_VAR IF __ISVALIDREF(refMSG_Entry) THEN Add_EVT_OUT REF= MANAGER.AddMsg_EVT_OUT( refMSG_Entry, _Get_EVT_Message(MSG_EVENT.OUT), _Get_EVT_AddCode(MSG_EVENT.OUT) )^; ELSE Add_EVT_OUT := 0; END_IF So far setting a reference variable to 0, did this. But now, the expression Add_EVT_OUT := 0; gives an error: [ERROR] DB_WTP_370: Add_EVT_ACK MSG_TRIGGER_EXT: C0032: Cannot convert type 'BIT' to type 'REFERENCE TO FB_MSG' Naturally... I can write: Add_EVT_OUT := DWORD#0; But is this the correct way? Is there any constant I could use instead, like "NULL"? Or this is totally wrong and to be avoided?
Last updated: 2024-03-24

Post by smartcoco on Release SP20 - Changes in behaviour? ^{CODESYS Forge talk (Post)}
You should use this method: VAR NULL:REFERENCE TO FB_MSG END_VAR Add_EVT_OUT REF= NULL;
Last updated: 2024-03-25

Post by andrax on Raspi Pi Bullseye Webvisu Autostart ^{CODESYS Forge talk (Post)}
Vielen Dank Für das Script.
Last updated: 2024-03-25

Raspi Pi Bullseye Webvisu Autostart ^{CODESYS Forge talk (Thread)}
Raspi Pi Bullseye Webvisu Autostart
Last updated: 2024-03-25

Post by wollvieh on Raspi Pi Bullseye Webvisu Autostart ^{CODESYS Forge talk (Post)}
Anbei meine Lösung zum Autostart der Webvisu, vllt. hilft es jemandem... =============================== Raspberry Pi Bullseye 11 Autostart Codesys Webvisu im Kiosk Mode 1)Datei erstellen: sudo nano/etc/xdg/autostart/Visustart.desktop 2)Inhalt der Datei: [Desktop Entry] Type=Application Name=Visustart Exec=bash -c "sleep 30 && /home/pi/Desktop/Visu" 3)Visu Datei erstellen sudo nano /home/pi/Desktop/Visu 4) Inhalt der Datei: #!/bin/sh xset -dpms xset s off xset s noblank matchbox-window-manager -use_titlebar no & unclutter & chromium-browser -display=:0 --kiosk --incognito --window-positon=0,0 5) Datei ausführbar machen sudo chmod+x /home/pi/Desktop/Visu ... nach Neustart Raspi startet die Codesys Webvisu automatisch im Kiosk Mode ===============================
Last updated: 2024-03-24

Post by fless on Release SP20 - Changes in behaviour? ^{CODESYS Forge talk (Post)}
use this to set an invalid reference Add_EVT_OUT REF= 0;
Last updated: 2024-03-24

Raspi Pi Bullseye Webvisu Autostart ^{CODESYS Forge talk (Thread)}
Raspi Pi Bullseye Webvisu Autostart
Last updated: 2024-03-24

How to catch save button event ^{CODESYS Forge talk (Thread)}
How to catch save button event
Last updated: 2024-03-25

Post by hock714 on How to catch save button event ^{CODESYS Forge talk (Post)}
I want to catch the event whenever save button being click in C#.
Last updated: 2024-03-25

Post by bschraud on Zielsystem stimmt nicht mit dem verbundenen Gerät überein ^{CODESYS Forge talk (Post)}
Dank umfangreicher Hilfe durch den Kontron Support kann ich nun wieder übersetzen. Es waren einige Bibliotheken auf einem älteren, nicht 64bit-kompatiblen Stand. Beim Öffnen des Projektes erscheint zwar ein Dialog zum Aktualisieren der Bibliotheken. Diesen hatte ich auch mit "Auf neueste setzen" bestätigt. Trotzdem waren etliche Bibliotheken im Projekt veraltet. Leider habe ich noch keine Stelle in der Online Hilfe gefunden, die die Zusammenhänge in der Bibliotheksverwaltung und das Vorgehen bei Fehlern erklärt. (Z.B. wie man vermeiden kann, dass eine Komponente automatisch eine ältere Bibliotheksversion lädt, obwohl eine aktuelle Version der gleichen Bibliothek schon hinzugefügt wurde.) Vielen Dank für die Hilfe!
Last updated: 2024-03-25

Zielsystem stimmt nicht mit dem verbundenen Gerät überein ^{CODESYS Forge talk (Thread)}
Zielsystem stimmt nicht mit dem verbundenen Gerät überein
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

PubSub communication - example ^{CODESYS Forge talk (Thread)}
PubSub communication - example
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

PubSub communication - example ^{CODESYS Forge talk (Thread)}
PubSub communication - example
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

PubSub communication - example ^{CODESYS Forge talk (Thread)}
PubSub communication - example
Last updated: 2024-03-25

Sort by relevance or date