Post by eschwellinger on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
in case you are using latest hw revision, there have been added some mac adresses - for the 4.17.0.0 release this might solve it. If not we need to investigate deeper. If it is application related you need to check the plclogger.
Last updated: 2025-09-02

Post by pernockham on AC Persistence - values are not read from file during start? ^{CODESYS Forge talk (Post)}
For the protocol. What also works is to do the process via ssh (using runtime on linux) sudo /etc/init.d/codesyscontrol stop modify the persistence file values sudo /etc/init.d/codesyscontrol start
Last updated: 2025-09-03

Post by cmason on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
There still is no solution to this. I am running Modbus version 4.4.0.0 and it still wont let me add more than 10 channels. Does anyone have a solution for this?
Last updated: 2025-09-05

Post by cmason on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
There still is no solution to this. I am running Modbus version 4.4.0.0 and it still wont let me add more than 10 channels. Does anyone have a solution for this?
Last updated: 2025-09-05

Post by gseidel on High-resolution drive with SoftMotion ^{CODESYS Forge talk (Post)}
Hi kporter, what value do you use for the modulo period? Can you please provide the complete axis configuration, including all scaling values? Thanks, Georg
Last updated: 2025-09-08

Post by gseidel on MC_MoveAbsolute: C0138: No matching 'FB_Init' method found for instantiation of SMC_MoveAbsRelPerformerImpl [ERROR] ^{CODESYS Forge talk (Post)}
Hi Imdat, can you please provide the exact version of CODESYS and the compiler version in the project settings? Thanks, Georg
Last updated: 2025-09-08

Post by gseidel on Use MC_Home without enabling the drive for homing method 35 ^{CODESYS Forge talk (Post)}
Hi Artur, as mentioned by imdatatas, homing when not enabled is not supported in SoftMotion. If enabling before homing is not an option, an alternative might be controller based homing using MC_SetPosition. Best regards, Georg
Last updated: 2025-09-08

Post by pernockham on Control for linux SL, 4.14.0.0 -> 4.15.0.0 breaks web page access. URL requires authentication ^{CODESYS Forge talk (Post)}
Ok, seems user management is enforce from versions later than SP14, is that what I see with 4.14.0.0 -> 4.15.0.0 and later (?)
Last updated: 2025-09-09

Post by pernockham on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
The structure should be the same independent of which runtime version. Im using Codesys control for linux SL. Ie, add an ethernet device, then profinet controler then phoenix PN bus coupler.
Last updated: 2025-09-09

Post by gseidel on Max lines of code, codesys CNC ? ^{CODESYS Forge talk (Post)}
We updated our help on the queue sizes, see this new page for our recommendations: https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_preprocessing_queuesize.html
Last updated: 2025-09-09

Post by timvh on Codesys Control for PLCnext (PLC - AXL F 2152) ^{CODESYS Forge talk (Post)}
Do not filter on Phoenix devices. First add an Ethernet device (from CODESYS). Then add a Profinet Controller (from CODESYS). Then add your Phoenix devices to this CODESYS Profinet Controller.
Last updated: 2025-09-09

Post by sharer on Recipe Manager - RecipeManCommands, load & write wrong values, Bug? ^{CODESYS Forge talk (Post)}
With reference to the release note for "CODESYS Recipe..." from CoDeSys (https://www.codesys.com/ecosystem/release-lifecycle/releases-updates/recipes/). After updating that software module to v4.6.0.0 on CoDeSys 3.5.21.1 I am no longer able to reproduce the problem.
Last updated: 2025-09-16

Post by flyingsheep on download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Post)}
Setup description CODESYS is running on an embedded RTOS. For testing, I use a local debugging environment where my PC is connected directly to the embedded SoC via an Ethernet cable (no switch or router in between).
Last updated: 2025-09-20

Post by flyingsheep on download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Post)}
CODESYS is running on an embedded RTOS. For testing, I use a local debugging environment where my PC is connected directly to the embedded SoC via an Ethernet cable (no switch or router in between).
Last updated: 2025-09-20

Post by liai on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
Hi gseidel, Thanks a lot. My softmotion is 4.18,so the SM3_Basic version is 4.18 by default. When I change the version of SM3_Basic to 4.17,complie works good then. Thank you for your kindness.
Last updated: 2025-09-22

Post by zatalian on codesys installer 2.5.0.0 ^{CODESYS Forge talk (Post)}
Is it just me, or is the option to import a configuration file for the add-ons missing in the new version of codesys installer?
Last updated: 2025-09-24

Post by gseidel on AXIS_REF_SM3 Error Codes? ^{CODESYS Forge talk (Post)}
Hi SLUCodesys, dwErrorId is a drive specific error number. The drive documentation should be consulted to interpret it. (Note that you should use MC_ReadAxisError to read this error, see https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Diagnostics/MC_ReadAxisError.html. Accessing the internal variable will result in outdated values if the acis error is not mapped by PDO and is not recommended in general.) uiDriveInterfaceError holds errors of the SoftMotion driver for the drive. It is also an internal variable, not intended for direct access. It is intended for logging, the PLC log will contain the drive interface error, consisting of this number and an error text. My recommendation for handling axis errors in the CODESYS application: 1) Use MC_ReadStatus on the axis to find out whether it is in state Errorstop 2) If in Errorstop, there are two possibilities: an error reported by the drive (MC_ReadAxisError) or an error of the SoftMotion function blocks (output MC_ReadStatus.FBErrorOccured). 3) If there is no drive error, you can use SMC_ReadFBError https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Diagnostics/FBError/SMC_ReadFBError.html Best regards, Georg
Last updated: 2025-09-24

Post by dkugler on Requesting ESI Files for Estun Pronet Servo Drives (EtherCAT) ^{CODESYS Forge talk (Post)}
you have visited https://en.estun.com/?list_139/1380.html and registered and there are no ESI files at data download? Asked the manufacturer?
Last updated: 2025-09-29

Post by gseidel on The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Post)}
Hi imdatatas, thanks for your detailed and thoughtful feedback. We will discuss the topic in our team. Best regards, Georg
Last updated: 2025-10-02

Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Dear Tim, This is the missing link for me. I was not aware of the fact that the docker container is claiming the smallest possible license. Now the serial number makes much more sense. Thank you
Last updated: 2025-10-02

Post by timvh on Licensing info not available. ^{CODESYS Forge talk (Post)}
In the VPLC configuration settings there is an entry for the IP address of the license server. In this setting fill in the IP address of your device (host IP address). Then when the virtual PLC starts up, it will get the license from the license container on the host. You can do this for all VPLC's running on your device. The VPLC will always take the smallest license which fits the required license. So if you have 2 licenses for VPLC's with small and large applications, then this will work fine if you start up one VPLC which requires the small license and the other which requires the large license. PS, personally I find it much easier, especially for testing and experimenting, to activate the licenses on a CODESYS (USB) key. This is easy to activate (on your development PC) and easier to move to another device. Addtionally you don't loose the license when you need to install a completely new image on the device.
Last updated: 2025-10-02

Post by nchau on Requesting ESI Files for Estun Pronet Servo Drives (EtherCAT) ^{CODESYS Forge talk (Post)}
Yes, that's correct. I registered and visited the page at https://en.estun.com/?list_139/1380.html , but there were no ESI files available under the Data Download section. I also tried contacting the manufacturer directly, but haven’t received any response yet.
Last updated: 2025-10-03

Post by richard-wang on Dynamically change the Trend recording property of a Trend element ^{CODESYS Forge talk (Post)}
Hi there, may I bother to ask if you have a solution for the dynamic trend recording?
Last updated: 2025-10-06

Post by richard-wang on Dynamically change the Trend recording property of a Trend element ^{CODESYS Forge talk (Post)}
Hi there, may I bother to ask if you have a solution for the dynamic trend recording?
Last updated: 2025-10-06

Post by timvh on How to correctly create a device descriptor (.devdesc.xml) for a custom Linux ARM64 PLC in CODESYS 3.5.21.20? ^{CODESYS Forge talk (Post)}
Yes, this is possible with the Toolkit. We only server customers in the Benelux that do this, so contact your local CODESYS distributor, or contact the sales team of CODESYS Germany.
Last updated: 2025-10-07

Sort by relevance or date