Post by dhumphries on Rounding error in simple addition ^{CODESYS Forge talk (Post)}
Thanks for the response, as I've thought about this problem over the last month I began to suspect this was a problem with not being able to exactly represent .1 as a 32 bit binary number. I think I've found a work around by making the number an integer, then dividing it by 10 and storing that value as a floating point number. There is still an issue with the value not being exact somewhere in the 8th or 9th decimal place, but because I'm incrementing an integer value then dividing it, the error doesn't compound.
Last updated: 2024-05-25

Post by nano on Display minutes as hours & minutes ^{CODESYS Forge talk (Post)}
hey time := INT_TO_TIME(minutes * 1000 * 60); update: forum show the math wrong
Last updated: 2024-05-26

Rounding error in simple addition ^{CODESYS Forge talk (Thread)}
Rounding error in simple addition
Last updated: 2024-05-25

Post by plunje on Sensor not set ^{CODESYS Forge talk (Post)}
A got a larger project but this very small example makes it clear. I have a button, and after it's clicked a lamp should flip on and stays on, and when the mouse-button is released it should stay on. When I try that in the PLC_PRG it works, but when I change it to a function block (seet attched demo proj) it isn't. I'm fairly new to PLC programming but are very experienced C# engineer, but this goes above my head...
Last updated: 2024-05-26

Post by ppix on MQTT PLC Chat: ^{CODESYS Forge talk (Post)}
Did you ever find a solution to this? I am having the same issue but using TLS connection.
Last updated: 2024-05-26

MQTT PLC Chat: ^{CODESYS Forge talk (Thread)}
MQTT PLC Chat:
Last updated: 2024-05-26

Post by donm on Regarding trend storage access error ^{CODESYS Forge talk (Post)}
i have created a project which contain 30 trend and suddenly trend recording is not working. its showing an error 30437."Determination of root pages for recording did not work for 'screen', error:30437" how to solve this issue?
Last updated: 2024-05-27

Post by kislov on Table How to set row number from 1 ( not from 0) ^{CODESYS Forge talk (Post)}
Use declaration with ARRRAY [1..x] instead of ARRAY [0..x]
Last updated: 2024-05-27

Post by timvh on Display minutes as hours & minutes ^{CODESYS Forge talk (Post)}
You could use the Modulo function to get the minute part from the total minutes: Minutes := TotalMinutes MOD 60;
Last updated: 2024-05-27

Post by donm on trend storage access error ^{CODESYS Forge talk (Post)}
i have created a project which contain 30 trend and suddenly trend recording is not working. its showing an error 30437."Determination of root pages for recording did not work for 'screen', error:30437" how to solve this issue?
Last updated: 2024-05-27

Post by timvh on Sensor not set ^{CODESYS Forge talk (Post)}
Your function block instance is not called, so the code is not executed to set the light on when the button is pressed.
Last updated: 2024-05-27

trend storage access error ^{CODESYS Forge talk (Thread)}
trend storage access error
Last updated: 2024-05-27

Post by hwopereis on SFC Action problems ^{CODESYS Forge talk (Post)}
Only logged in to agree with the above. So counter intuitive. Why does an associated action force the variable when the step it is associated to is not active? Makes no sense at all, is terrible to debug and costs a lot of time. Such as shame.
Last updated: 2024-05-27

SFC Action problems ^{CODESYS Forge talk (Thread)}
SFC Action problems
Last updated: 2024-05-27

Post by wollvieh on Display minutes as hours & minutes ^{CODESYS Forge talk (Post)}
Here a code for an Operation Counter with : days,hours,minutes,seconds as an example, maybe it points you the right direction ? FUNCTION_BLOCK OperationDayHour VAR_INPUT IN : BOOL; // Betrieb Takt : BOOL; // 1Hz Systemtakt END_VAR VAR_OUTPUT BetrTag : UDINT; // Ausgabe Betriebstage Betrstd : UDINT; // Ausgabe Betriebsstunden Betrmin : UDINT; // Ausgabe Betriebsminuten Betrsec : UDINT; // Ausgabe Betriebsekunden BetrString : STRING; // Ausgabe als String END_VAR VAR ///Erkennung Taktflanke Flanke: R_TRIG; END_VAR VAR_IN_OUT BetrsecAbsolut: UDINT; //Ein/Ausgangsvariable Betriebssekunden RETAIN !!! END_VAR Flanke(CLK:= Takt, Q=> ); (*Erkennung Taktflanke*) IF (IN AND Flanke.Q) THEN (*Sekunden hochzählen*) BetrsecAbsolut := BetrsecAbsolut + 1; END_IF Betrsec := BetrsecAbsolut MOD 60; Betrmin := ( BetrsecAbsolut / 60) MOD 60; Betrstd := ( BetrsecAbsolut / 60 / 60 ) MOD 24; BetrTag := ( BetrsecAbsolut / 60 / 60 /24 ); BetrString := RIGHT ( UDINT_TO_STRING( BetrTag + 100000),5); BetrString := CONCAT (BetrString, 'd_'); BetrString := CONCAT (BetrString,RIGHT ( UDINT_TO_STRING( Betrstd + 100000),5)); BetrString := CONCAT (BetrString, 'h_'); BetrString := CONCAT (BetrString, RIGHT ( UDINT_TO_STRING( Betrmin + 100),2)); BetrString := CONCAT (BetrString, 'm_'); BetrString := CONCAT (BetrString, RIGHT ( UDINT_TO_STRING( Betrsec + 100),2)); BetrString := CONCAT (BetrString, 's');
Last updated: 2024-05-27

Post by robpqs on Program from one PLC to other WAGO 750-8204 ^{CODESYS Forge talk (Post)}
Hello, You use the WAGOUpload tool. You can download it on the download center of WAGO. Make a backup and restore it on the new device. (if can check the remanent data to copy the persistent variables if necessary) You can also use a SD card, go to the WBM copy it the image to the SD card and restart the other controller on the SD card. In the WBM, copy it back to the internal flash. If you contact your local Wago office, they will more than probably help you. There is also a WAGO forum. RP,
Last updated: 2024-05-27

Post by robpqs on Visual error with cut/shredded texts ^{CODESYS Forge talk (Post)}
Hello, This is an old topic but it might help. This can/should be solved by either of the solution below 1. disabling the "Support client animations and overlay of native elements" option in the visualization Manager (which is handy) 2. disabling the "Hardware acceleration" of the browser. Saw it happening on some clients/PC and on other it works fine with the same webvisu... (Version 3.5.19.20 with visu package 4.4.0.0) Hopefully it will be fixed it in a next release. I haven't tested the 4.5.0.0 visu packages yet. RP,
Last updated: 2024-05-27

Program from one PLC to other WAGO 750-8204 ^{CODESYS Forge talk (Thread)}
Program from one PLC to other WAGO 750-8204
Last updated: 2024-05-27

Visual error with cut/shredded texts ^{CODESYS Forge talk (Thread)}
Visual error with cut/shredded texts
Last updated: 2024-05-27

Display minutes as hours & minutes ^{CODESYS Forge talk (Thread)}
Display minutes as hours & minutes
Last updated: 2024-05-27

Post by thisischris on "You are using inconsistent overlay settings, please check your compiler defines for the current application" error ^{CODESYS Forge talk (Post)}
Hello. I am a new user. On generating the first test project I am receiving this error message. You are using inconsistent overlay settings, please check your compilerdefines for the current application (-> GENERATE_OVERLAY_VISU) and the setting within the visualization manager. Can anyone help?
Last updated: 2024-05-28

Post by thisischris on "You are using inconsistent overlay settings, please check your compiler defines for the current application" error ^{CODESYS Forge talk (Post)}
Duplicate
Last updated: 2024-05-28

Post by wollvieh on Nema 17 Schrittmotor 2.7V kann das sein? ^{CODESYS Forge talk (Post)}
Steht doch so im Datenblatt, suche halt nach nema17, 24Volt Typen.
Last updated: 2024-05-28

CM4S GPIO's in Codesys ^{CODESYS Forge talk (Thread)}
CM4S GPIO's in Codesys
Last updated: 2024-05-28

Post by mike22 on Nema 17 Schrittmotor 2.7V kann das sein? ^{CODESYS Forge talk (Post)}
Hallo Zusammen, ich wollte gerade einen Nema 17 Schrittmotor beim oyostepper.de bestellen. Auf der Webseite wird der Motor mit 2.7V angegeben. Das kann doch nicht sein oder? Ich möchte ihn mit 24V betreiben. https://www.oyostepper.de/goods-318-Nema-17-Getriebeschrittmotor-mit-50-1-Planetengetriebe-0036-Grad-168A-27V-39Ncm-Getriebe-Schrittmotor.html Das kann doch nicht sein oder?
Last updated: 2024-05-28

Sort by relevance or date