Post by kenth1973 on MC_Phasing state explenation ^{CODESYS Forge talk (Post)}
Hi George. Thx for the info and recommendation - the robot is running production at customer. But - would you have any information about the states numbers and their different explenations?
Last updated: 2025-12-11

Post by marciohogenelst on stablish CAN communication through the PC's USB port ^{CODESYS Forge talk (Post)}
I'm using Codesys v3.21SP4 on my PC via ControlWin to establish CAN communication through the PC's USB port. The software works fine. The CAN/USB converter works fine and is validated. However, there is no communication. Which folder and file should be modified to allow the CAN/USB converter to work and thus achieve the connection? Converter used: PCAN-View Information not yet processed: Access the folder: C:\Program Files (x86)\3S CODESYS\GatewayPLC\CODESYSControl.cfg Uncomment the line: Component.5=CmpPCANBasicDrv Any help would be appreciated.
Last updated: 2025-12-11

stablish CAN communication through the PC's USB port ^{CODESYS Forge talk (Thread)}
stablish CAN communication through the PC's USB port
Last updated: 2025-12-11

Post by marciohogenelst on stablish CAN communication through the PC's USB port ^{CODESYS Forge talk (Post)}
I'm using Codesys v3.21SP4 on my PC via ControlWin to establish CAN communication through the PC's USB port. The software works fine. The CAN/USB converter works fine and is validated. However, there is no communication. Which folder and file should be modified to allow the CAN/USB converter to work and thus achieve the connection? Converter used: PCAN-View Information not yet processed: Access the folder: C:\Program Files (x86)\3S CODESYS\GatewayPLC\CODESYSControl.cfg Uncomment the line: Component.5=CmpPCANBasicDrv Any help would be appreciated.
Last updated: 2025-12-11

Post by durallymax on VAR_INFO from inside of a FB to get info on the instance. ^{CODESYS Forge talk (Post)}
The help link appears to be broken. When I implemented something similar I had to add {attribute 'reflection} above the declaration of the FB with {attribute 'instance-path'} above the string VAR that would contain the path. Then wrote a function to trim off however much I wanted removed by searching for periods, then formatting it with spaces at the periods and removing brackets on arrays while also breaking up the PascalCase to present it a bit nicer for the end-users.
Last updated: 2025-12-12

VAR_INFO from inside of a FB to get info on the instance. ^{CODESYS Forge talk (Thread)}
VAR_INFO from inside of a FB to get info on the instance.
Last updated: 2025-12-12

Post by durallymax on How to use MQTT in CODESYS Control Win V3 ^{CODESYS Forge talk (Post)}
With the IIoT library/license or the one provided by the hardware OEM. Several examples online of how to use the MQTT Client SL library.
Last updated: 2025-12-12

Post by eschwellinger on symbol config - IecVarAccRegisterInstance - error ^{CODESYS Forge talk (Post)}
which plc in which version do you use?
Last updated: 2025-12-14

Post by eschwellinger on stablish CAN communication through the PC's USB port ^{CODESYS Forge talk (Post)}
since 3.5.20.10 version here: c:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSControlWinV3x64\<unique number="">\</unique>
Last updated: 2025-12-14

stablish CAN communication through the PC's USB port ^{CODESYS Forge talk (Thread)}
stablish CAN communication through the PC's USB port
Last updated: 2025-12-14

symbol config - IecVarAccRegisterInstance - error ^{CODESYS Forge talk (Thread)}
symbol config - IecVarAccRegisterInstance - error
Last updated: 2025-12-14

Post by eschwellinger on symbol config - IecVarAccRegisterInstance - error ^{CODESYS Forge talk (Post)}
which plc in which version do you use?
Last updated: 2025-12-14

Post by timvh on Version management ^{CODESYS Forge talk (Post)}
This depends on what you want to achieve with installing the latest version and how you manage your projects and repositories. Maybe you also want to update your device (right click on it to update) or maybe your device is depending on certain versions of libraries (go to the library manager in your project and download the missing libraries). An option is also to first create a projectarchive of the current project you have before you install a new version of CODESYS. Then you can open this projectarchive in the new CODESYS version. Especially if you install the latest version of CODESYS in a Sandbox.
Last updated: 2025-12-15

Post by rettore84 on Trafo 6DOF ^{CODESYS Forge talk (Post)}
I didn't have a single reference. I used several sources through online reaserach.
Last updated: 2025-12-15

How can adding a colored leather vest upgrade a simple outfit? ^{CODESYS Forge talk (Thread)}
How can adding a colored leather vest upgrade a simple outfit?
Last updated: 2025-12-15

Trafo 6DOF ^{CODESYS Forge talk (Thread)}
Trafo 6DOF
Last updated: 2025-12-15

Post by gseidel on SMC_ERROR SMC_CGR_INVALID_POSPERIOD ^{CODESYS Forge talk (Post)}
Hi blitz, that usually means that the modulo period, when converted to increments, is larger than 2^31. (The bus bandwidth is usually 2^32.) What is your "technical unit", do you program in angular degrees? And what is the modulo period? If you want you can post the drive configuration (screen shot of the "General" and "Scaling/Mapping" page). Best regards, Georg
Last updated: 2025-12-16

SMC_ERROR SMC_CGR_INVALID_POSPERIOD ^{CODESYS Forge talk (Thread)}
SMC_ERROR SMC_CGR_INVALID_POSPERIOD
Last updated: 2025-12-16

Post by pernockham on Trend legend naming and access/config to/of trend/legend-variables ^{CODESYS Forge talk (Post)}
Trying the web-version of trend-data. This seems to be a impressive tool, but I lack/cant find a number of what I would think are important parts. There does not seem to be a way to get away from the dot.notated variable naming in the legend.. A developer might want the dot-notation but an end-customer will surely not. For instance I want to display 12 temperatures, instead of t1, t2 etc.. they will be named. gvl_io.unit[1].trend.temps.t1_a gvl_io.unit[1].trend.temps.t1_b gvl_io.unit[1].trend.temps.t1_c gvl_io.unit[1].trend.temps.t2_a .. gvl_io.unit[1].trend.temps.t4_b.. gvl_io.unit[1].trend.temps.t4_c.. Quite a lot of unnecessary text/data taking space from the actual trend => Is there a way to access/interface the legend-data programmatically so I can change the presentation/naming?
Last updated: 2025-12-16

Post by willebro on "Distributed clocks are not synchronized, Rea time problem on hardware" ? ^{CODESYS Forge talk (Post)}
https://forge.codesys.com/forge/talk/Engineering/thread/632c29cb93/#8d94 The above comment is the best, but if you just want to see it work you can try disabling the distributed clock. It's not the right thing to do but it should resolve that error.
Last updated: 2025-12-16

Post by gseidel on MC_Phasing state explenation ^{CODESYS Forge talk (Post)}
Hi kenth1973, no, we do not have this kind of information on internal variables. iPhasingState has been removed and is no longer present in current versions of SoftMotion. Best regards, Georg
Last updated: 2025-12-17

Post by gseidel on MC_Phasing state explenation ^{CODESYS Forge talk (Post)}
Hi kenth1973, it is not a matter of who created the function block. It is just that we don't have, and don't provide, documentation about internal implementation details... Hope you can understand that, Georg
Last updated: 2025-12-17

Post by gseidel on Can't get SMC_SmoothPath to work ^{CODESYS Forge talk (Post)}
Hi bertus, I cannot see any problem in the code you posted. Just some ideas: What is the value of D_ANGLE_TOL? - Do you need the assignment bAbort := NOT bDecoder? Does it help to leave it out? Any errors (e.g. SMC_SmoothPath.Error/ErrorID) or PLC log messages? What if you comment out SMC_SmoothMerge and SMC_LimtiDynamics, is corner smoothing still not working? Is bDecode written from a different task (e.g. visu)? Then I would recommend to assign to a local variable (bDecodeLocal := bDecode) and use that for all FBs. Otherwise, FBs might see different values of bDecode in a single cycle, which will cause problems. Regards, Georg
Last updated: 2025-12-17

Post by kenth1973 on MC_Phasing state explenation ^{CODESYS Forge talk (Post)}
Hi George - ok thanks - but who created this FB in the first place? Could you lead me to the creator company? Is CODESYS not the old S3 that created this FB? :-)
Last updated: 2025-12-17

Post by kenth1973 on MC_Phasing state explenation ^{CODESYS Forge talk (Post)}
Hi Georg OK got it, thank you. I respect your (CODESYS) policies on that issue. Will try to update according to your recommondation if the customer experience same error in the future. Though - from within my coding heart it does bother me deeply, that I cannot get further understanging/knowledge on the iPhasingState, but I guees I will have to swollow that bitter pill and get on with it! hehe ;-)
Last updated: 2025-12-17

Sort by relevance or date