Post by stuartjr on Disabling forcing of specific variables ^{CODESYS Forge talk (Post)}
I also thought that if I had logic writing a value to this variable, then it would override the force anyway, since I thought that the force request was only applied at the beginning and end of the PLC scan. But this doesn't seem to be the case, the force persists throughout the logic regardless of what I write to the variable with logic
Last updated: 2024-03-15

Post by matthew on Persistence Manager Backup ^{CODESYS Forge talk (Post)}
Hi @eschwellinger How does the persistent manager files work on v20? I would Like to upgrade my v19 as I'm still having issues. Sometimes if there is a power cut CodeSys won't load the Persistence Manager files and I have to redownload to the PLC and then copy my backup persistent files and then start the application. I hope it's a lot more robust in v20
Last updated: 2024-04-23

Post by timvh on Codesys SVN ^{CODESYS Forge talk (Post)}
Minimum version is 3.5 SP19 Patch 3. See https://store.codesys.com/en/codesys-git.html But you could ask your PLC vendor if it is possible to program their PLC's which have Runtime version SP16 with development version 3.5 SP19 or higher (should normally be possible, but with Safety PLC's there could be some regulation limitations).
Last updated: 2024-05-01

Post by andrej on Channel timeout CmpChannelMgr ^{CODESYS Forge talk (Post)}
Hello, I use Codesys RTE 3.5.16.5. If I connect to the PLC I often get the following message: (see printscreen) 1. Channel timeout CMpChannelMgr. 2. Closing connection CmpChannelMgr. Can you tell me, what the meaning of this is? What does the number 1250030,1220020 resp. c400:0a0a:015a:0301 refer to? I could find any information in the online help. Thanks a lot.
Last updated: 2024-05-08

Post by kuegerls on CSV Utility SL ^{CODESYS Forge talk (Post)}
Hello, I want to read a CSV file using the CSV Utility SL library, but I encounter an 'invalid_handle' error during initialization. What could be the cause? For my test program see the screenshot. I have purchased a license, and it is also installed on my PLC. Thank you in advance. Best regards, Stefan.
Last updated: 2024-05-13

Post by matthew on Persistence Manager Backup ^{CODESYS Forge talk (Post)}
Hi @eschwellinger yes I have been using xDoubleStorage It happened again and I checked and the files were still there with there contents, restarting codesys or rebooting would not even reload them. Doing a download and then starting the PLC loaded them and began working again. Some sort of mismatch error or something?
Last updated: 2024-05-14

Post by xiaoyan on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Hello Well i need some basic advice. My protegoD drive is shown deactivated in the device tree. i can see its variables and other i/o in online mode but the device itself is deactivated. how can i address this issue. is there any configuration error.using ethercat link to connect to protegoD by Primo MC plc
Last updated: 2024-05-16

Post by rd76065 on Opto 22 Groov PR2 Modbus TCP Master communication ^{CODESYS Forge talk (Post)}
Previously, I have used ModbusEthernet_04 library for Wago for ModbusTCP Master communicational in Codesys V2.3. How to use same communication of similar UDT for Opto22 Groov PR2 PLC in Codesys V3.5 SP20. Can I use OSCAT library - Network -MB_Client or IODrvModbusTCP - ModbusRequest for this requirement? If any other please guide.
Last updated: 2024-05-31

Post by timvh on Persistent Retain Variables Not Visible in Online View (WAGO PFC100 + CODESYS) ^{CODESYS Forge talk (Post)}
It is a known issue. It only happens with CODESYS and Wago controllers and the Persistent Variables. It seems related to using 64 bit variables in the PV list (e.g. LREAL). Internally in the PLC everything works okay. It is just a monitoring issue.
Last updated: 2025-10-26

Post by bruno-roth on Parker Compax3 controlled by Schneider LMC 201 ^{CODESYS Forge talk (Post)}
Hello, You could not run EtherCAT-Softmotion drives with LMC201 PLC. This Controller has an EtherCAT master but only to run simple I/O devices. You could not use this EtherCAT master on the LMC201 for Motion. Schneider PACdrive Controller use SERCOS and only own drives (LXM62 with Sercos) for motion.
Last updated: 2026-01-13

Post by timvh on CODESYS: Combining Master Redundancy with EtherCAT Ring Topology – Is it Supported? ^{CODESYS Forge talk (Post)}
Yes, this works (at least we have it running with Wago PLC and Beckhoff I/O), but the concept works. You need 2 PLC's with at leat 3 network interfaces. And 2 switches (can be unmanaged). See the attached simple diagram for the solution.
Last updated: 2026-02-05

Post by ewi04 on Recipe Manager - RecipeManCommands, load & write wrong values, Bug? ^{CODESYS Forge talk (Post)}
It seems that there is a limitation with the STRUCTs. Does anybody know, what’s okay to save (add to the recipe) and what’s not okay? Or is there another problem with my project? If I have only an array in the recipe definition everything works perfectly (see project).
Last updated: 2023-11-15

Post by bjarne-pagaard on Unable to add alarm configuration object to project ^{CODESYS Forge talk (Post)}
I believe it should be available. It may be the case, that your device does not support the alarm configuration. Some smaller PLCs sometimes do not support it. You can try changing to a different device, like a Codesys Control Win, in your project, and see if then allows you to add the alarm configuration.
Last updated: 2024-09-27

Post by mucleus on How do I fix ";Internal Error (x86-64): Invalid type size" error? ^{CODESYS Forge talk (Post)}
I opened the project file of version 3.5.19.7 in 3.5.21.0. I updated all the environment of the project to the latest and compiled it. When I compile it, I get an error ";Internal Error (x86-64): Invalid type size". How can I fix this error? I will wait for your help.
Last updated: 2025-04-15

Post by jaspergain on SoftMotion Axes issue ^{CODESYS Forge talk (Post)}
Dear, We have an issue with SoftMotion and it's licensing. We don't use SoftMotion in this project. But a SoftMotion license is required by it. The License metrics tell's us there is a -1 Axes. Is there a way to reset this? Delete this? There was a MotionControl device in the project, but we have deleted this. But it stayed at -1. Thanks for you help.
Last updated: 2024-02-29

Post by k4zz on Static Code Analysis ^{CODESYS Forge talk (Post)}
I've already experimented with two methods, but unfortunately, they only function with projects of type *.project. Consequently, when executing: system.commands["staticanalysis", "run"].execute() For the 2nd Option: You'll need to ensure that in the Static Analysis Settings, the option "Perform static analysis automatically after compilation" is checked. # get Project values myProject = projects.primary # Creates an active application app = myProject.active_application # build Application and run static code analysis app.generate_code()
Last updated: 2024-03-15

Post by saugat10 on I have errors while building the project ^{CODESYS Forge talk (Post)}
I have some errors as you can see in the picture when i build the project. I have not been able to trace back to the error and i have no idea where to look at to fix this issue. What is GVL_Io? Is it related to some library?
Last updated: 2024-04-10

Post by rikkrt on Limited options ^{CODESYS Forge talk (Post)}
Hi! I was downloading codesys for a school project, but I cannot seem to find where and how to get the other programming languages. When I try to create a new project, I only get the option to program in structured text. *see problemcodesys.png Does anyone know where I can get the other languages? Thanks in advance, Rik
Last updated: 2024-06-06

Post by andrej on Write to File on soft PLC winV3x64 ^{CODESYS Forge talk (Post)}
Hello all, I would like to store some data in text file. I use the soft PLC Win V3x64, on Windows 10. I use the SysFile Library 3.5.17.0. If I store the file directly in the in the directory of the PLC i.e. in '/CODESYSControlWinV3x64/E1FA7ABE/PlcLogic/LogAU.txt' the file is correctly filled with the data. However, If I use an absolute path to a different directory no data is stored in the respective file. Despite the fact that the respective file exists and the Filehandler is correctly opened (see in picture _fdSysFHandle <> -1). // sFileName : STRING := 'LogAU.txt'; // STORES FILE IN ../CODESYSControlWinV3x64/../PlcLogic/LogAU.txt' sFileName : STRING := 'C/Temp/LogAU.txt'// DOES NOT WORK --------------------- // FILE DESCRIPTOR _fdSysFHandle := SysFile.SysFileOpen( szFile:= sFileName,am:= SysFile.AM_APPEND,pResult := ADR(_Result)); Does some have an idea where the problem is, resp. how I can get store a file in an arbitrary directory. Thanks a lot and kind regards Andreas
Last updated: 2023-10-24

Post by farren on How to stay in a method until something is finished. ^{CODESYS Forge talk (Post)}
I know I'm thinking about this wrong -- too many decades of procedural and event-driven programming and only a few months of PLC ST programming...... I've created a visualization with a button that when pushed calls a method. I want the method to take a pressure reading, wait one minute and then take another pressure reading. I'm looking for leaks. I'm using TON for the delay. It seems like what is happening is that the method gets called once and it takes the first reading and starts the TON. But then execution continues, leaves that method call, and the second reading never happens. I can force the method to keep running until the whole thing is done with a While loop, but I understand that is considered BAD in PLC programming. If it push the button again to call the method again, it picks up where it left off and if the timer is complete then it runs the remaining code. How do I keep that method running until it is complete with just one call without using a while loop that ties up the PLC for a minute? Thanks! -Farren
Last updated: 2025-10-31

Post by eschwellinger on communication ^{CODESYS Forge talk (Post)}
depends on if you use PFC200 SL from CODESYS store or the Wago target for the PFC. If you use the SL product you need to setup the interface by a plcshell command...
Last updated: 2023-08-19

Post by sven01 on Documentation / Usage Help For Scripting Engine Libraries ^{CODESYS Forge talk (Post)}
Hi, I am still not able to figure out how to use the the classes and their functions. 😔 Let's say I would like to use the function "importfile()" from the class "ScriptTextListObject.ScriptTextListMarker". I would be grateful for an additional example. Thanks! 😊
Last updated: 2023-08-21

Post by tvm on Web Client (HMI) Disconnects from Webvisu (Weidmuller u-OS) ^{CODESYS Forge talk (Post)}
We have seen this kind of thing before. I have two questions: 1. What kind of HMI are you using? 2. When this happens, are you able to connect using https, on port 8089?
Last updated: 2023-09-06

Post by dexterdva on Creating a custom kinematics starting from Scara2 model. ^{CODESYS Forge talk (Post)}
Hello, I'm trying to develop a custom kinematics derived to Kin_Scara2_Z. there is someone that have the source code of this library? Thanks Dexter
Last updated: 2023-09-11

Post by chandrasekharrk on OPC UA Companion Specifications / Information model ^{CODESYS Forge talk (Post)}
Hello, Any work around for this problem. I am also facing the similar issue. wehn uploading Information model generated from OPC UA modeller. Regards Chandrasekhar RK
Last updated: 2023-10-02

Sort by relevance or date