Post by simotion on Inheritance of axis ^{CODESYS Forge talk (Post)}
I have developped a function block 'Axis' the inherits from 'AXIS_REF_SM3' -> FUNCTION_BLOCK Axis EXTENDS AXIS_REF_SM3 In my global variable list I define a variable MasterDrive of type Axis and assign Axis1. Axis1 is a virtual drive (AXIS_REF_VIRTUAL_SM3). This type should inherit from AXIS_REF_VIRTUAL. VAR_GLOBAL MasterDrive : Axis := Axis1; However I get the error 'Cannot convert type'. What is the way to obtain what I want : function block inheriting AXIS_REF_SM3 and initialising this function block with a Softmotion virtual or real axis?
Last updated: 2023-12-07

Post by tk096 on SMC_NCDecoder very slow to decode lines ^{CODESYS Forge talk (Post)}
Hi, you can call the decoder function block in a loop and/or decrease the task cycle interval of Task_PATH.
Last updated: 2024-08-23

Post by gatto on library ModbusTCP Slave 4.1.0.0 - function block ModbusServer ^{CODESYS Forge talk (Post)}
I've always liked codesys, but sometimes it drives me crazy
Last updated: 2024-11-28

Post by struccc on library ModbusTCP Slave 4.1.0.0 - function block ModbusServer ^{CODESYS Forge talk (Post)}
:) Yeah... Definitely not a "boring" platform, they are nice to give us work for the upcoming years... :)
Last updated: 2024-12-02

Post by maxsuelcunha on EtherCAT SM Drive configuration error ^{CODESYS Forge talk (Post)}
You can simply excute the function block SMC3_ReinitDrive to the referred axis.
Last updated: 2025-02-28

Post by felipemsgarcia on Axis EtherCAT address ^{CODESYS Forge talk (Post)}
Hello, Thank you for your answer. I'm afraid I was not clear on what I was trying to achieve. I'm trying to change parameters and command axes from inside a function block and the first thing that came to my mind was pass both the EtherCAT slave and axis to the function block (as image attached). But, I believe it's worse than just pass directly the EtherCAT slave address to the function block (is it???). However I was wondering if there was a way to get the EtherCAT address directly from the axis, so I don't need to pass the EtherCAT slave nor the EtherCAT address to the function block. Thank you again!
Last updated: 2025-03-07

Post by anlebr on Alarm group template - Is it not possible with several instances? ^{CODESYS Forge talk (Post)}
Hi In the POU section of my project I have created a Fan function block and defined an alarm group template for this FB with one alarm (Motor fault). In the PLC program I define two instances of the fan function block. When going to the alarm configuration and pressing "Create or update alarm instances", I get two alarms listed. So far so good. However, when I start my program and check the alarm table in the visualization I only see one alarm, even if both are active. Am I doing something wrong, or is it not possible to define alarms on a function block level and get one set of alarms per instance of the function block?
Last updated: 2025-04-01

Post by timvh on Sensor not set ^{CODESYS Forge talk (Post)}
Your function block instance is not called, so the code is not executed to set the light on when the button is pressed.
Last updated: 2024-05-27

Post by jbcregen on Accessing parameters from a structure or function block with the web interface ^{CODESYS Forge talk (Post)}
Confirmed. The Data Analyzer tool can indeed access all OPC-UA symbols. Thanks !
Last updated: 2025-12-02

Post by niloufar on Execution Order of Function Blocks ^{CODESYS Forge talk (Post)}
Hi, Our program incorporates various function blocks and programs written in different languages such as St and SFC. They implement numerous actions and methods using different languages from their function blocks. My question is whether the execution order of function blocks is associated with the programming languages used. I understand that cycle time can be configured in the task configuration, but I'm curious if there is a specific sequence order of execution for function blocks written in different languages. For example, all function blocks in (ST) are executed first, followed by the execution of (SFC). Specifically, when the function is written in (ST) and the action is implemented in (SFC). I modified all function blocks in the main PLC program and configured a task configuration for the main program.
Last updated: 2023-12-13

Post by jarnok on How to know if output if function block is used ^{CODESYS Forge talk (Post)}
Hi, Is it possible to know of an output of a function block is used? I've found there is a way to find unused inputs of a fb, through the attribute: is_connected. But I'm wondering if the same can be done for an output. Thanks in advance!
Last updated: 2024-10-15

Post by pascaljt on Warning code C0373 ^{CODESYS Forge talk (Post)}
Hello, I wrote a function block for a controller but I have a warning code C0373 "expression or part of it has no effect" and the sub routine which contain my function block is underlined in blue. Despite, the FB works perfectly. Do you know why I have this warning ? Thanks. Pascal.
Last updated: 2024-10-30

Post by siscu on Raspberry Pi: List of available example applications ^{CODESYS Forge talk (Post)}
Could this be turned into a library? I'd love for a way to have the main program call a function block method using the program's I2C_master device. I assume I should be passing the master as a variable for the function block, but I don't see how that could be achieved
Last updated: 2024-05-15

Post by ben1 on HMI Pushbutton/Move Instruction ^{CODESYS Forge talk (Post)}
Hey mate, did you get to the bottom of this? If not, have you double checked the buttons are linked to the correct variables and/or performing the correct action? Have you tried always enabling the block to confirm false is moved to the variable if so?
Last updated: 2024-02-01

Post by smartcoco on Function block method default arguments ^{CODESYS Forge talk (Post)}
It's not that you missed something, it's that CODESYS doesn't have this feature. I hope CODESYS can add this feature. We also hope to add function overload functionality.
Last updated: 2023-12-22

Post by davelewis104 on J1939 SA ^{CODESYS Forge talk (Post)}
I am curious if there is a function block or function that will allow me to monitor the J1939 CANBus and pull out all of the SAs that are on a particular bus, without having to have them loaded in the J1939 manager?
Last updated: 2024-04-30

Post by kporter on Exception with ReadNbrSlaves function ^{CODESYS Forge talk (Post)}
I've been playing with the code using the Windows soft master and the ReadNbrSlaves function block seems to work here: https://content.helpme-codesys.com/en/libs/EtherCATStack/4.8.0.0/EtherCATStack/pou-ETCMasterStack/DynamicConfig/fld-DynamicConfig.html
Last updated: 2025-10-31

Post by timvh on Alarmmanagement – Dynamic Alarm List ^{CODESYS Forge talk (Post)}
Probably best to create an alarm template for your motor function block. Then automatically the alarm manager can be filled with all the alarms for all instances of the motor function blocks (based on the created alarm template). See: https://content.helpme-codesys.com/en/CODESYS%20Visualization/_cds_obj_alarm_group_template.html
Last updated: 2026-04-25

Specify Input Configuration "OnDialogClosed" Action to only react to certain Dialogs ^{CODESYS Forge talk (Thread)}
Specify Input Configuration "OnDialogClosed" Action to only react to certain Dialogs
Last updated: 2023-10-02

AlarmMgr Database Error in method WriteToStorage: Error code = 30531, Action = 1030 ^{CODESYS Forge talk (Thread)}
AlarmMgr Database Error in method WriteToStorage: Error code = 30531, Action = 1030
Last updated: 2023-11-21

Visu buttons action work with mouse click but not with touch actions ^{CODESYS Forge talk (Thread)}
Visu buttons action work with mouse click but not with touch actions
Last updated: 2019-12-24

Is there any way to get the name of the current action... pou... ^{CODESYS Forge talk (Thread)}
Is there any way to get the name of the current action... pou...
Last updated: 2017-03-20

Is there a way to call action with AQ in ST? ^{CODESYS Forge talk (Thread)}
Is there a way to call action with AQ in ST?
Last updated: 2020-01-03

an element of "Array of BOOL" in SFC Action name ^{CODESYS Forge talk (Thread)}
an element of "Array of BOOL" in SFC Action name
Last updated: 2008-05-05

Post by dhumphries on Execution Order of Function Blocks ^{CODESYS Forge talk (Post)}
Function blocks in a SFC are executed left to right, top to bottom, instructions in ST are executed from left to right top to bottom as well. I think you are asking about the execution of POUs although you use the name function block, I believe POUs are executed in the order they are shown under the main task.
Last updated: 2023-12-28

Sort by relevance or date