Post by tristan on Codesys v3.5.22.10 - Internal error:System.AggregateException...Value cannot be null...Parameter name: expLValue
CODESYS Forge
talk
(Post)
Hi, I have exactly the same issue when I try to update from 3.5.21.50 to 3.5.22.20. Currently I didn't find where is the problem. Hope somebody can find a way. Tristan
Last updated: 2026-07-17
Post by kuegerls on PROFINET Controller SL: WRREC remains BUSY forever, no DCE/RPC packets transmitted (RevPi Connect 5 + NORD SK205E)
CODESYS Forge
talk
(Post)
Hello , I am currently evaluating the CODESYS PROFINET Controller SL on a Revolution Pi Connect 5 and have encountered a problem with acyclic PROFINET Record Access (WRREC/RDREC). System Hardware: Revolution Pi Connect 5 Runtime: CODESYS Control 4.16.0.0 (SDK 3.5.21.10) Development System: CODESYS V3.5 SP21 (64-bit) CommFB: 3.5.17.10 ProfinetCommon: 4.6.0.0 PROFINET Controller Device: PN-Controller 4.6.0.0 PROFINET Device: NORD DRIVESYSTEMS SK205E with SK TU4-PNT GSDML: GSDML-V2.46-NORDDRIVESYSTEMS-PNT-20251016.xml Network The PROFINET network is completely separated from the office network. RevPi: eth0 → Office network eth1 → PROFINET wlan0 → Visualization The PN Controller is configured to use eth1. IP configuration: RevPi (eth1): 192.168.100.1/24 NORD Drive: 192.168.100.3 Connection is established successfully. Current Status The PN Controller reports: Controller Status = Run Online = TRUE IP Active = TRUE Connections = 1 Cyclic PROFINET IO communication works correctly. Problem I am trying to access PKW parameters via WRREC (Record Index 100). The request buffer contains: 01 14 00 04 92 00 00 00 00 00 00 which corresponds to Reference = 0x01 Request = Read Axis = 0 Parameter = 170 + 1000 Subindex = 0 Value = 0 The WRREC call is fbWRREC( REQ := xWrReq, ID := ConnectionID, INDEX := 100, LEN := 11, RECORD := ADR(TxBuffer) ); REQ is pulsed for one PLC cycle only. Observed Behaviour WRREC enters BUSY state and never finishes. Observed values: BUSY = TRUE DONE = FALSE ERROR = FALSE STATUS = 16#FFFFFFFF indefinitely. Packet Capture A Wireshark capture was taken on the PROFINET network. Observed traffic: PROFINET RT LLDP DCP Observed: successful cyclic IO Not observed: DCE/RPC Record Write Record Read RPC Bind No RPC packets are transmitted at all. Diagnostic Messages The controller repeatedly reports AR alarm.ind(err) AR CMI timeout although cyclic IO communication continues to work. Already Verified The following points have already been checked: correct Ethernet interface (eth1) correct CREATE_ID result correct Device ID correct Slot/Subslot correct GSDML correct REQ pulse RECORD buffer is larger than LEN cyclic IO communication works different Record Indices (100...104) tested Question Is there any known issue or limitation where WRREC/RDREC requests remain permanently BUSY and no RPC Record Access packets are generated? Could this behaviour be related to Runtime 4.16.0.0, PN Controller 4.6.0.0, the missing runtime license (currently running in demo mode), or any known issue with the PROFINET Controller SL? I am currently evaluating the PROFINET Controller SL and therefore the runtime is operating in demo mode. Could you please confirm whether WRREC/RDREC (acyclic Record Data services) are fully supported in demo mode, or whether a valid license is required for these services? If required, I can provide: complete project archive Wireshark capture (.pcap) GSDML online screenshots diagnostic log Thank you very much for your help. Best regards, Stefan
Last updated: 2026-07-17
Post by tvm on Generic Variables and FDB
CODESYS Forge
talk
(Post)
I also ran into this, try using Coil<1> as the type in the FBD box. From what I understand, with VAR_GENERIC CONSTANT, the compiler creates separate data types for each different function block declaration.
Last updated: 2026-07-22
Post by tvm on XY Chart causes extremely long cycle in Visu Task
CODESYS Forge
talk
(Post)
No solution, but we have also seen similar behaviour with the XY chart, using Schneider M262 PLCs. It was a contributing factor to our decision to switch to TwinCAT HMI.
Last updated: 2026-07-22
XY Chart causes extremely long cycle in Visu Task
CODESYS Forge
talk
(Thread)
XY Chart causes extremely long cycle in Visu Task
Last updated: 2026-07-22
Generic Variables and FDB
CODESYS Forge
talk
(Thread)
Generic Variables and FDB
Last updated: 2026-07-22
Post by eschwellinger on KOP & FUP in Sp21P6 nicht vorhanden
CODESYS Forge
talk
(Post)
Hallo Falk, schau mal im CODESYS Installer ob "CODESYS FBD/LD" installiert ist - wenn nein nachinstallieren. Grüße
Last updated: 2026-07-24
Post by radar17892 on Zielsystem Problem nach Bibliotheken hinzufügen
CODESYS Forge
talk
(Post)
Mit welcher Version hast du das Projekt geöffnet?
Last updated: 2026-07-27
Static Analysis Error SA0026
CODESYS Forge
talk
(Thread)
Static Analysis Error SA0026
Last updated: 2026-07-27
Zielsystem Problem nach Bibliotheken hinzufügen
CODESYS Forge
talk
(Thread)
Zielsystem Problem nach Bibliotheken hinzufügen
Last updated: 2026-07-27
Post by fabiodasilveira on Static Analysis Error SA0026
CODESYS Forge
talk
(Post)
Hello Everyone, I am really struggling to understand why codesys would present an error regarding the following: VAR strByte1: STRING(10):= '192'; strByte2: STRING(10):= '168'; strByte3: STRING(10):= '1'; strByte4: STRING(10):= '0'; strIPAddress: STRING:= '192.168.1.1'; END_VAR //Updating Variables strByte1:= BYTE_TO_STRING(GVL.abyPSsIpAddress[0]); strByte2:= BYTE_TO_STRING(GVL.abyPSsIpAddress[1]); strByte3:= BYTE_TO_STRING(GVL.abyPSsIpAddress[2]); strByte4:= BYTE_TO_STRING(GVL.abyPSsIpAddress[3]); strIPAddress:= CONCAT(strByte1, CONCAT('.', CONCAT(strByte2, CONCAT('.', CONCAT(strByte3, CONCAT('.', strByte4)))))); Any help would be much appreciated.
Last updated: 2026-07-27
Post by somlioy on Beckhoff ESI import german text
CODESYS Forge
talk
(Post)
Solved. Had to explicitly select English inside CODESYS as language instead of system default, which for my case is norwegian... Open Tools → Options → International Settings Set the development-system language to English Restart codesys
Last updated: 2026-07-28
Post by somlioy on Beckhoff ESI import german text
CODESYS Forge
talk
(Post)
Hi When I import beckhoff ethercat esi files the devices installs with german text, how to get it in english? I can see in the xml files that they have both english and german texts ... downloaded from here https://download.beckhoff.com/download/configuration-files/io/ethercat/xml-device-description Beckhoff_EtherCAT_XML.zip
Last updated: 2026-07-28
Beckhoff ESI import german text
CODESYS Forge
talk
(Thread)
Beckhoff ESI import german text
Last updated: 2026-07-28
SysTimeRtcHighResGet --> Millisekunden mit Zeitzone verrechnet
CODESYS Forge
talk
(Thread)
SysTimeRtcHighResGet --> Millisekunden mit Zeitzone verrechnet
Last updated: 2026-07-31
Post by thomas-k on SysTimeRtcHighResGet --> Millisekunden mit Zeitzone verrechnet
CODESYS Forge
talk
(Post)
SysTimeRtc.SysTimeRtcHighResGet(pTimestamp := lstActualIPCUnixTime_ms); SysTimeRtc. SysTimeRtcConvertHighResToLocal(lstActualIPCUnixTime_ms,lstActualIPCUnixTimeLocal_ms); SysTimeRtc.SysTimeRtcConvertLocalToHighRes(lstActualIPCUnixTimeLocal_ms,lstActualTime_ms); F30_SysTimeRtcHighResGetLocal:= TO_ULINT(lstActualTime_ms); Dies hat immer die selbe Zeit in UTC. Wie bekomme ich eine HIGHRes Zeit in Millisekunden. Und diese Zeit nicht in UTC sondern mit der Zeitzone verrechnet..... Und reicht es die Zeitzone mit "SysTimeRtcSetTimezone" zu setzen oder muss die Zeitzone im Linux (PC) gesetzt werden ?
Last updated: 2026-07-31
SysTimeRtcHighResGet --> Millisekunden mit Zeitzone verrechnet
CODESYS Forge
talk
(Thread)
SysTimeRtcHighResGet --> Millisekunden mit Zeitzone verrechnet
Last updated: 2026-07-31
OPC UA PubSub SL 1.3 — UADP WriterGroup with assigned PSS.SecurityGroup still publishes plaintext
CODESYS Forge
talk
(Thread)
OPC UA PubSub SL 1.3 — UADP WriterGroup with assigned PSS.SecurityGroup still publishes plaintext
Last updated: 2026-08-04
Post by lzml on HTML5 visualization controls disabled on CODESYS Control for Linux SL - overlay not supported?
CODESYS Forge
talk
(Post)
Thanks for the suggestion - I updated everything via the CODESYS Installer and restarted, but I'm still hitting the same error. What I did - Updated via Tools > CODESYS Installer - Visualization system libraries (VisuElems, VisuElemsAlarm, VisuInputs, VisuNativeControl, etc.): 4.7.0.0 -> 4.10.0.0 - CODESYS Control for Linux SL: 4.15.0.0 -> 4.21.0.0 (based on CODESYS SDK 3.5.22.20) - Restarted CODESYS Development System Checked project environment (Project > Project Environment) after restart - Compiler version: 3.5.22.0 - Library versions: all up to date - Visualization Profile: CODESYS Visualization 4.10.0.0 - SoftMotion version: 4.20.2.0 Result: compiling with Device = CODESYS Control for Linux SL still fails with the same error: "Overlay is not supported for your target visualization device." The custom HTML5 control is still disabled/missing from the Toolbox with this Device selected (same as before), and still appears normally when I switch the Device to a Windows target. Is there anything else specific I should check (e.g. a setting on the Device description itself, a different SL package/edition, or is WebVisu overlay for custom HTML5 controls simply not implemented yet for CODESYS Control for Linux SL regardless of package version)? Any pointer appreciated.
Last updated: 2026-08-05
Post by timvh on HTML5 visualization controls disabled on CODESYS Control for Linux SL - overlay not supported?
CODESYS Forge
talk
(Post)
I would suggest to install the latest visualization and visualization add-ons. Go to Tools - CODESYS installer to updates these add-ons (or just start the CODESYS installer through the Windows start menu). After installation, restart CODESYS SP22 and update the project to use this new visualization profile (you can update this through the menu Project - Project Environment - Visualization Profile).
Last updated: 2026-08-05
Post by timvh on HTML5 visualization controls disabled on CODESYS Control for Linux SL - overlay not supported?
CODESYS Forge
talk
(Post)
I was able to reproduce this by doing something wrong. I guess what you did is first create an application for the Control Win, or some other device and then switched this to the Linux SL. But then the Visualization Manager still has the "TargetVisu" component, besides the WebVisu component. The Linux SL doesn't support this TargetVisu as part of the runtime. You should run a separate process for this. So remove the TargetVisu from the Visualization Manager and then you will be able to load the application.
Last updated: 2026-08-06
Post by dmb-fan on Hilscher cards CoDeSys Control RTE
CODESYS Forge
talk
(Post)
Sounds good. Thx
Last updated: 2026-08-06
HTML5 visualization controls disabled on CODESYS Control for Linux SL - overlay not supported?
CODESYS Forge
talk
(Thread)
HTML5 visualization controls disabled on CODESYS Control for Linux SL - overlay not supported?
Last updated: 2026-08-06
Post by timvh on Hilscher cards CoDeSys Control RTE
CODESYS Forge
talk
(Post)
Completely managed by CODESYS, including licenses. You specifically have to set the parameters correctly in the CODESYSControl.cfg to let the RTE have access to the cards. See: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_windows_rte_v3_startup_cifx_hil.html
Last updated: 2026-08-06
Post by thejesh on WebVisu: switch-frame destroys and rebuilds referenced visualization - is retention configurable?
CODESYS Forge
talk
(Post)
Hi, HTML5 Conrtrol elements on CODESYS V3.5 SP22 Patch 2, WebVisu only (no TargetVisu). The client is Chromium 147 in kiosk mode on a Raspberry Pi CM5 panel; the runtime is CODESYS Control Win V3 x64/CODESYS Control RTE V3 x64 on a separate IPC. I have measured that changing a Frame element's switch-frame variable destroys the currently referenced visualization and fully rebuilds it on return, including all embedded HTML5 controls. We would like to know whether this lifecycle is configurable. Measurement 1: Curently, our production page contains a good number of custom HTML5 controls and will only increase , each of which the WebVisu client instantiates as a separate about:srcdoc iframe. I counted live targets via the Chromium remote debugging endpoint (curl http://localhost:9222/json/list) before and after switching. Production displayed (index 0) 108 iframes Switched to a light page (index 1) 46 iframes Switched back to Production 108 iframes 62 controls are destroyed on leaving the page and re-instantiated on return. Observed latency was approximately 2.5 -5s away from the heavy page and approximately 4.0 -5 s back to it. This was measured with the panel otherwise idle: 2.8% system CPU, 97.1% idle, 2 h 56 min uptime, no remote-desktop session running, hardware acceleration confirmed active in chrome://gpu. I had previously measured the same behaviour under a much higher CPU load and have since resolved that load separately (VISU_TASK cycle period), so I am confident the rebuild is the frame lifecycle itself and not CPU starvation. Measurement 2 — frame offset instead of switch index I then displayed the same overlay page by a different mechanism. Instead of using a switch-frame index, I placed the page in a fixed Frame parked off-screen below the visible canvas, and drive its Y offset from an INT in Structured Text to move it into view. With this approach the overlay appears immediately, the production page underneath is never torn down and keeps updating, and no visualization is destroyed or rebuilt in either direction. The iframe count does not change at any point. This is the same visualization, containing the same HTML5 controls, as in Measurement 1 — the only difference is how it is brought on screen. So the rebuild appears to be a property of the switch-frame mechanism specifically, not of the page or its control count. Questions: Is the destroy-and-rebuild behavior on switch-frame the intended and documented lifecycle for WebVisu? Is there any setting, property or client option that causes a referenced visualization to remain instantiated when it is not the active index — the equivalent of keeping it mounted but not displayed? Does the runtime or client offer any form of caching or pre-instantiation for referenced visualizations, so that a return switch does not pay the full construction cost? Is the cost specific to HTML5 controls, or would the same rebuild occur with an equivalent number of native visualization elements? We ask because it would inform whether reducing our HTML5 control count is a viable solution. Is there a recommended pattern for showing a full-screen page over a live production screen without tearing the production screen down? My current workaround is to keep every page permanently instantiated and move it on and off screen by driving a frame offset variable, which avoids the rebuild entirely but means every page stays live and consumes client resources for the life of the session. This works, but I would prefer to use the supported mechanism if one exists. Any help on this is greatly appreciated. Thank you!
Last updated: 2026-08-07
To search for an exact phrase, put it in quotes. Example: "getting started docs"
To exclude a word or phrase, put a dash in front of it. Example: docs -help
To search on specific fields, use these field names instead of a general text search. You can group with AND or OR.