EL7031 Bus not running ^{CODESYS Forge talk (Thread)}
EL7031 Bus not running
Last updated: 2017-05-08

EthernetIP Adapter Bus is not running ^{CODESYS Forge talk (Thread)}
EthernetIP Adapter Bus is not running
Last updated: 2018-06-11

PFC100 Error "Bus not running" ^{CODESYS Forge talk (Thread)}
PFC100 Error "Bus not running"
Last updated: 2024-06-17

Post by tama00 on GPIOs not running with Raspberry Pi 4 (and SPI connection) ^{CODESYS Forge talk (Post)}
Hello everyone, I have a working SPI connection (with transferExt) between a Raspberry master with Codesys and an ESP32 slave. I would also like to use a few GPIO pins. Is there a problem with using SPI AND GPIOs? Environment: Raspberry Pi 4+ with Raspian from Oct 23 Codesys V3.4 SP19 Patch 5 with Runtime Version 4.10.0.0 Device: GPIOs B+/Pi2 My problem: The status is displayed as “GPIOs : not running”. And also during mapping the message “The bus is not running. The values shown are perhaps not actual”. However, the variable changes that I make in my program are displayed under “Current Value”. In the Logic Analyzer, the pin toggles during transmission with small intervals of +-4us (seems to be a cyclical disorder, but I don't know where exactly it could be coming from). This applies to pins that I actually use (output) but also to the other GPIOs (not used). With GPIO 4, the line remains permanently high. Attached is a screenshot from the Logic Analyzer. Channel 1,3,5 were GPIO pin 26, 22, 17 Would be very grateful for help. Best regards
Last updated: 2024-05-06

Recover application running in the controller (not not application) ^{CODESYS Forge talk (Thread)}
Recover application running in the controller (not not application)
Last updated: 2020-06-29

3.5.17 structered variables is not shown ^{CODESYS Forge talk (Thread)}
3.5.17 structered variables is not shown
Last updated: 2021-06-30

CANbus Status Bus Load (and other values) not updating ^{CODESYS Forge talk (Thread)}
CANbus Status Bus Load (and other values) not updating
Last updated: 2020-11-12

Profinet bus not running on Raspberry pi Codesys Runtime ^{CODESYS Forge talk (Thread)}
Profinet bus not running on Raspberry pi Codesys Runtime
Last updated: 2021-04-22

Codesys Control for PLCnext SL, Bus not running ^{CODESYS Forge talk (Thread)}
Codesys Control for PLCnext SL, Bus not running
Last updated: 2024-08-12

Codesys Control for PLCnext SL, Bus not running ^{CODESYS Forge talk (Thread)}
Codesys Control for PLCnext SL, Bus not running
Last updated: 2024-08-12

Post by matt-s on HMI Pushbutton/Move Instruction ^{CODESYS Forge talk (Post)}
I know, that is not the issue though. The issue is the HMI_Blower_Auto_PB variable not changing to false. I do not have the IO modules plugged in yet, that is why there are NaN values for those variables. That should not affect this.
Last updated: 2024-01-25

CODESYS Gateway is not running ^{CODESYS Forge talk (Thread)}
CODESYS Gateway is not running
Last updated: 2024-10-24

Post by lostcontrol on Remote Ethernet/ip Adapter communication with scanner running on codesys ^{CODESYS Forge talk (Post)}
is the bus running.? what type of values/IO is the adaptor providing? do you have a map of the data layout? are you actually looking at the right offset?
Last updated: 2023-12-16

Font Underline on webvisu not shown ^{CODESYS Forge talk (Thread)}
Font Underline on webvisu not shown
Last updated: 2020-08-10

OPC server not running ^{CODESYS Forge talk (Thread)}
OPC server not running
Last updated: 2017-02-10

PN-Controller not running ^{CODESYS Forge talk (Thread)}
PN-Controller not running
Last updated: 2021-01-23

Pfc200bus not running. ^{CODESYS Forge talk (Thread)}
Pfc200bus not running.
Last updated: 2017-11-21

Codesys Gateway not running ^{CODESYS Forge talk (Thread)}
Codesys Gateway not running
Last updated: 2022-06-07

TON ET not running ^{CODESYS Forge talk (Thread)}
TON ET not running
Last updated: 2021-08-19

PFC200BUS not running ^{CODESYS Forge talk (Thread)}
PFC200BUS not running
Last updated: 2024-07-10

Ethercat not running. ^{CODESYS Forge talk (Thread)}
Ethercat not running.
Last updated: 2024-10-16

Is CODESYS webserver not up running before the DHCP client has got an ip-address? ^{CODESYS Forge talk (Thread)}
Is CODESYS webserver not up running before the DHCP client has got an ip-address?
Last updated: 2023-07-13

Yellow triangle and bus not running error in Modbsu TCP master and Slave. ^{CODESYS Forge talk (Thread)}
Yellow triangle and bus not running error in Modbsu TCP master and Slave.
Last updated: 2021-12-07

Yellow triangle and bus not running error in Modbsu TCP master and Slave. ^{CODESYS Forge talk (Thread)}
Yellow triangle and bus not running error in Modbsu TCP master and Slave.
Last updated: 2021-12-07

Post by ewi04 on How to upload application file to remote controller (offline) ? ^{CODESYS Forge talk (Post)}
Hi, I am looking for a good way to update a decice remotely. The devices are distributed worldwide and have normally no connection to the internet. The CODESYS Automation Server can't help here. So I want to update the decices via USB stick. I have written my own code* to update the files that are created with ‘Create boot application’. But sometimes strange things happen: visu elements are present, but are not found the application is no longer registered and therefore no longer starts I have not yet found out why these errors occur. Has anyone had similar problems or found a better way? Is there perhaps a CODESYS library or something else? Many thanks! *the code deletes the directories on the device and copies the new directories from the USB stick while the system is running (goes without saying)
Last updated: 2024-02-05

Sort by relevance or date