Raspberry Pi Hardware

The Raspberry Pi is an ARM based, very powerful, but cheap mini computer. The natively supported operating system is Linux-Userbereich.

For automation projects, the direct access to GPIOs, SPI, I2C and One Wire is a big value of the board.

Support in CODESYS

CODESYS can easily be installed from the store. It can then be used in a 2h demo, but restarted as often as possible.

To install CODESYS, follow the following steps...

Prepare CODESYS

• Register in the CODESYS Store
• Download the Raspberry Pi package
• Install the package by double clicking on it

Prepare the Pi

• Download the Raspbian Image
• Follow one of the installation instructions
• Enable SSH
• Boot the target and check if ssh works with e.g. Putty

Install the Runtime

• Open CODESYS
• Open the Deploy Tool: Tools -> Update Raspberry Pi
• Enter IP Address
• Enter username and password (e.g. user: pi, password: raspberry)
• Click on "install"

Note: Remember to change the password of the user pi to secure the system!

Configuration

Linux Distribution

Realtime Patch

Network Configuration