Activity for kalmeyer
-
kalmeyer posted a comment on discussion Motion 🇬🇧
CONTINUED.......
-
I WOULD BE GRATEFUL FOR HELP....✔✔✔ I HAVE SPENT A LOT OF TIME ON THIS "SMALL" PROBLEM😢 I HAVE MADE A MC_POWER FOR STEPPERMOTOR. BUT I DO NOT GET A "HIGH" ON THE STATUS OUTPUT EVEN THOUGH PENABLE, PREG AND PDRIVESTART ARE ACTIVATED ( SEE ATTACHED WRONG_1) HAD I MADE SOME ERROR IN PLC_PRG_1..???? (WRONG_2) 1000 THANKS FOR HELP WITH THIS PROBLEM. 👀👀 /KLAUS FROM DENMARK
-
I WOULD BE GRATEFUL FOR HELP....✔✔✔ I HAVE SPENT A LOT OF TIME ON THIS "SMALL" PROBLEM😢 I HAVE MADE A MC_POWER FOR STEPPERMOTOR. BUT I DO NOT GET A "HIGH" ON THE STATUS OUTPUT EVEN THOUGH PENABLE, PREG AND PDRIVESTART ARE ACTIVATED ( SEE ATTACHED WRONG_1) HAD I MADE SOME ERROR IN PLC_PRG_1..???? (WRONG_2) 1000 THANKS FOR HELP WITH THIS PROBLEM. 👀👀 /KLAUS FROM DENMARK
-
Hello everyone I have been trying to solve this problem for a long time. Please help me..... I have browsed: https://forge.codesys.com/drv/sm3raspistepper/home/Home/ and it says under "IMPLIMENTATION" that I have to create a POU with the text to be able to use: MC_Power or MC_MoveVelocity How do I write it into the CODESYS program? Thanks in advance /Klaus Kalmeyer
-
Is there perhaps a place where I can see examples of programming with different instructions? This would be a great help. Maybe there are some places where ready-made programs are posted that can be downloaded and tested? /Klaus
-
I AM VERY GRATEFUL FOR YOUR HELP. I HAVE INSTALLED: CODESYS SOFTMOTION VER. 4.19.0.0 AS SEEN IN THE ATTACHED FILE. BUT IT DOESN'T CHANGE THE FACT THAT I GET 6 ERRORS WHEN I HAVE INSTALLED SM_Drive_RaspiStepper_Direct DO YOU HAVE ANY SUGGESTIONS ON WHAT I CAN DO NOW? /KLAUS
-
I have installed: SM_Drive_PosControl 4.18.0.0 and SM_Drive_RaspiStepper_Direct 0.0.0.7 and SM_Drive_RaspiStepper_PulsDir 0.0.0.7 And when I "Generate Code" I immediately get 6 errors (see attached file) What can I do?????
-
HERE IS MY PLC_PRG /KLAUS
-
Hi Helpers I'm trying to work with stepper motor on Rasp 5 for the first time. So I'm pretty new.😥here. I've used: https://forge.codesys.com/drv/sm3raspistepper/home/Home/ but I get the following error when I insert. I also get 6 errors when I "rebuilder" after installering "SM_Drive_RaspStepper_direct" from the tree. Hope there is help for me. Thanks in advance /Klaus
-
Hi Campbell Thank you very much for your answer. I have now tried to follow your 9 points. But, is it true that point 3) SOFTMOTION costs € 200.00 and that I MUST use the program to move on? Wishing you a good weekend / Klaus
-
Hello everyone I'm going to control a stepper motor with RPI. On the page: "https://forge.codesys.com/neighborhood" are "Device drivers" and: SM3RaspiStepper. But as it can be seen in the attached image, I do not get the option to add "SM_Drive_RaspiStepper" from the menu. I will be super happy if anyone can help me. Thanks in advance.
-
Hello everyone I'm going to control a stepper motor with RPI. On the page: "https://forge.codesys.com/neighborhood" are "Device drivers" and: SM3RaspiStepper. But as it can be seen in the attached image, I do not get the option to add "SM_Drive_RaspiStepper" from the menu. I will be super happy if anyone can help me. Thanks in advance.
-
Hello everyone Thank you very much for your answer. The problem is solved when I had bought an MPU6050 that was faulty. I activated the GYRO MPU6050 directly from CoDeSys and I got reedings immediately in RUN MODE. Thank you very much for the help ....
-
Hi Cambell I'm trying to understand what you're advising me to do and maybe I'm just not good enough. When I stand on the MPU6050 and right click - Edit I / O I do not have the image you sent me ....... Can you help me further? I am very grateful for your answers and I hope I solve the problem so I can move forward with my task. / Klaus
-
Thanks for reply....... Do you think I should make this setting in: codesys or in Raspberry? In fact, I do not know what you mean when you write: use variables in code before update. Do you know codesys? Hope you can answer me again / Klaus
-
Hello everyone! I am using Codesys ver 3,5 on Raspberry Pi and I want to use a Gyro MPU6050 I have installed Gyro MPU6050 from "I2C masters" (it is there as default) But I do not have any reedings in RUN MODE Must I install a library? What am I missing? I would be very glad if you have any advices on how to proceed? Thank you everyone for your help!