Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

RPI 4.2.0.0 Runtime will not auto start on reboot

matthew
2022-01-27
2022-01-27
  • matthew

    matthew - 2022-01-27

    Hi There,

    I have just upgraded to 4.2.0.0 to find out my applications do automatically start up and run after a reboot. I have even tried a new blank project with the same issue. Is this a bug that needs reporting or some new settings that need to be set?

     
  • eschwellinger

    eschwellinger - 2022-01-27

    No, the bootapplication will start as in all other versions.Check the plc logger for more information. Maybe you have switched to readonly?

     

    Last edit: eschwellinger 2022-01-27
  • matthew

    matthew - 2022-01-27

    Hi,

    I have attached the PLC Log after a reboot Note: I had to start runtime using " sudo service codesyscontrol start " No the system is not read only. Everything was working fine and then upgraded to v3.5.17.30 and that's when the auto start stopped working.

     
  • eschwellinger

    eschwellinger - 2022-01-27

    .. seems to run from my point of view.
    .../01/2022 5:17:54 am" infoId="10">Application [Application] started
    infoId="6">Bootproject of application [Application] loaded...

     
  • matthew

    matthew - 2022-01-27

    I think I have it sorted now... looks like something may have gone wrong with the upgrade. I removed everything with sudo dpkg -r codesyscontrol and then reinstalled via codesys and everything seems to be working as it should now. So during the package upgrade from 4.1.0.0 to 4.2.0.0 something must have gone wrong or not installed correctly.

     

Log in to post a comment.