Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I just down loaded the latest version and tried to run it in simulation mode with one of the included example projects. Once the project is loaded it runs fine, until I try to open one of the visualizations. Then I immediately get a "Program Loaded Exception" error flashing red at the bottom of the screen... When I look in the log I see the following:
Edwin Schwellinger hat geschrieben:
Hi,
you need to set 'VISU_NO_EXCEPTION_HANDLING' on rightlick to application und 'Build' as Compiler define (as workaround)
This will be solved to 3.5SP7Patch3 Release (29.10)
BR
Edwin
Thanks Edwin It does work
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I just down loaded the latest version and tried to run it in simulation mode with one of the included example projects. Once the project is loaded it runs fine, until I try to open one of the visualizations. Then I immediately get a "Program Loaded Exception" error flashing red at the bottom of the screen... When I look in the log I see the following:
SOURCEPOSTION App=[Sim.Device.Application] area=0, offset=3926786
EXEPTION [AccessViolation] occured: App=[Sim.Device.Application], Task=[VISU_TASK]
What am I doing wrong?? ... I tried an earlier version of codedesys using its version of the example projects and it works fine.
Regards
Ken
Did anyone have a solution to this?
We have the exact same issue. Works fine with older versions but not in 3.5 SP7 Patch 1 or 2. Without a visualization it works ok too.
Thanks
Hi,
you need to set 'VISU_NO_EXCEPTION_HANDLING' on rightlick to application und 'Build' as Compiler define (as workaround)
This will be solved to 3.5SP7Patch3 Release (29.10)
BR
Edwin
Thank you very much!
Thanks Edwin It does work