Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
All Devices are operational but the Master cyclically requests the SDO configuration from the slaves. Is there a setting in the Master or Slave that causes the Master to request SDO config continuously.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
which SDO is requested...?
If you are on Version 3.5SP7 or newer you could add CANOPEN_DEBUG as
Compiler define and check the plc logger for more Information (CANopen debug messages)
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
All Devices are operational but the Master cyclically requests the SDO configuration from the slaves. Is there a setting in the Master or Slave that causes the Master to request SDO config continuously.
Hi,
which SDO is requested...?
If you are on Version 3.5SP7 or newer you could add CANOPEN_DEBUG as
Compiler define and check the plc logger for more Information (CANopen debug messages)
BR
Edwin