I have this Beijer T7B with SoftControl codesys runtime.
Trying to add a ModbusTCP slave device but I get a Orange circular icon and this message under status:
"The license is missing or invalid. The PLC runs in demo mode."
If I go to license manager->device->soft container and choose TxB SoftControl I get this message:
"Licensing info not availeble. There is no dongle attached to the device"
Any suggestion to solve this problem?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The T7B SoftControl is an old product and has been superseded.
It wasn't able to add additional licences to it (Mod TCP Server in your case). The built-in licences are ethercat master, Modbus RTU master and Modbus TCP client.
The current X2 platform does have this capability.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all!
I have this Beijer T7B with SoftControl codesys runtime.
Trying to add a ModbusTCP slave device but I get a Orange circular icon and this message under status:
"The license is missing or invalid. The PLC runs in demo mode."
If I go to license manager->device->soft container and choose TxB SoftControl I get this message:
"Licensing info not availeble. There is no dongle attached to the device"
Any suggestion to solve this problem?
You need to ask the Beijer support for this -
The T7B SoftControl is an old product and has been superseded.
It wasn't able to add additional licences to it (Mod TCP Server in your case). The built-in licences are ethercat master, Modbus RTU master and Modbus TCP client.
The current X2 platform does have this capability.